Question

In: Physics

A container is filled to the brim with 1.4 L of mercury at 20°C. As the...

A container is filled to the brim with 1.4 L of mercury at 20°C. As the temperature of the container and mercury is increased to 51°C, a total of 7.6 mL of mercury spill over the brim of the container. Determine the linear expansion coefficient of the material that makes up the container. The coefficient of volume expansion of mercury is 1.8☓10-4 (°C)-1.

Solutions

Expert Solution

so the linear expansion coefficient of the material is 1.62 × 10-6 (degree Celsius inverse).


Related Solutions

A container is filled to the brim with 1.5 L of mercury at 20
A container is filled to the brim with 1.5 L of mercury at 20
3) A polystyrene container is filled to the brim with water at 0 0C and sealed...
3) A polystyrene container is filled to the brim with water at 0 0C and sealed with a polystyrene lid of the same thickness as the container. The sealed container is immersed in a reservoir of liquid Nitrogen at a temperature of 73 K. The surface area of the container is 5 x 10-2 m2 and the rate of heat flow from the inside to the outside of the container is 66 Watts. (a) Assuming the temperature of inner and...
a bottle of alluminium (1L ) at 20 C is filled to the top with mercury....
a bottle of alluminium (1L ) at 20 C is filled to the top with mercury. The bottle is then heated to 110 C. How much mercury will spill? 

Q. If a 500-L aluminum tank is filled to the brim with water at a temperature...
Q. If a 500-L aluminum tank is filled to the brim with water at a temperature of 22.00 0C. Will the water overflow when temperature cools to 15.00 0C? Assume the aluminum tank volume is also affected by the temperature change
A 3 L container is filled with 12 moles of N2 at -140.6 °C. Calculate the...
A 3 L container is filled with 12 moles of N2 at -140.6 °C. Calculate the pressure using ideal gas equation, van der Waals equation, SRK equation, virial equation, and the compressibility factor chart correlation.
an elastic container filled with an ideal gas occupies 148 L volume at 85 degree c...
an elastic container filled with an ideal gas occupies 148 L volume at 85 degree c . what would the volumevbe at 15 degree c?
A 2.50 L container is filled with gaseous H2S at 13.0ºC and a pressure of 169.1...
A 2.50 L container is filled with gaseous H2S at 13.0ºC and a pressure of 169.1 torr. Then 200.0 mL of water is added to the container (without allowing any of the H2S to escape). A small amount of H2S dissolves in the water. When the system has reached equilibrium, the gas pressure in the container is 155.9 torr and the temperature is still 13.0ºC. The vapor pressure of water at this temperature is 11.2 torr. What is the molar...
A gas-filled balloon with a volume of 2.10 L at 1.20 atm and 20°C is allowed...
A gas-filled balloon with a volume of 2.10 L at 1.20 atm and 20°C is allowed to rise to the stratosphere (about 30 km above the surface of the Earth), where the temperature and pressure are −23°C and 3.00×10−3 atm, respectively. Calculate the final volume of the balloon. ____ L
14.2 A 0.50 L container is initially filled with Nitrogen gas at STP. The gas expands...
14.2 A 0.50 L container is initially filled with Nitrogen gas at STP. The gas expands against a piston adiabatically to a volume of 50.0% larger than the original volume. The Nitrogen may be treated as an ideal gas with ?=7/5. a) Calculate the final temperature and pressure. b) What is the work done? c) Sketcha pV-diagram for this process. On this diagram also draw the isotherms for the initial and final temperatures.
Suppose a 3.00 L nickel reaction container filled with 0.0072 M H2 is connected to a...
Suppose a 3.00 L nickel reaction container filled with 0.0072 M H2 is connected to a 3.00 L container filled with 0.247 M F2. Calculate the molar concentration of H2 at equilibrium. -Hint, find the equilibrium concentration of HF and F2 (as in the above problem), then use the equilibrium expression to find the hydrogen concentration. -When you do the limiting reactant calculation you essentially use up all the limiting reactant. So, hydrogen concentration is approximately zero. But, it can't...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT