Question

In: Electrical Engineering

a) Design and implement a combinational circuit that converts excess-3 to BCD code using 2-input NAND...

a) Design and implement a combinational circuit that converts excess-3 to BCD code using 2-input NAND gates. (Design: means show all the steps)

b) Draw the logic diagram of 2x4 decoder using NOR gates only. Include an enable input. (describe in details)

c) Construct a 5-to-32-line decoder with four 3-to-8 decoders with enable and a 2-to-4-line decoder. Use block diagrams for the components. (Describe in details while you are constructing the required circuit)

d) Design a 2-bit multiplier using a set of Multiplexers and 2-input NAND gates (Design: means show all the steps)

Solutions

Expert Solution


Related Solutions

1. Design a combinational logic circuit that converts 4 bits binary to gray code 2. Design...
1. Design a combinational logic circuit that converts 4 bits binary to gray code 2. Design a combinational logic circuit that converts gray code to 4 bits binary 3. Design a combinational logic circuit that converts 4bits 2421 to excess 3 code
1. Design a combinational circuit that coverts a 4-bit Gray code to a 4-bit Excess-3 code....
1. Design a combinational circuit that coverts a 4-bit Gray code to a 4-bit Excess-3 code. Provide detailed solution and explanation. 2. Design a double edge-triggered D flip-flop using multiplexers only. The output of the flip-flop Q should “sample” the value of the input D on both rising (+ve) and falling (-ve) edges of the clock CLK. Provide detailed solution and explanation. 3. Design an FSM counter that counts the sequence: 00, 11, 01, 10, 00, 11, ... . Provide...
6. (5pts) Using four 1-bit full adders only to design a four-bit combinational Excess-3 to BCD...
6. (5pts) Using four 1-bit full adders only to design a four-bit combinational Excess-3 to BCD converter. Show the block diagram and label all inputs and outputs
Design a combinational circuit that implements a Binary-to-Grey Code converter. Your input should be a four-bit...
Design a combinational circuit that implements a Binary-to-Grey Code converter. Your input should be a four-bit binary number, and your output should be the equivalent four-bit Grey Code value. First, design the circuit using NAND gates only. Next, design the circuit using a minimal number of 2-input XOR gates.
Problem Statement: Design a combinational logic circuit that meets the following specifications: • Input: 3-bit binary...
Problem Statement: Design a combinational logic circuit that meets the following specifications: • Input: 3-bit binary integer (A), 2-bit binary integer (B). • Output: 5-bit binary integer (X) = (AxB). For example, A=6, B=2, X=6x2=12. Notation: • A=(A2,A1,A0) • B=(B1,B0) • X=(X4,X3,X2,X1,X0) Required Output: Show the truth table and a minimal logic expression for each of the outputs. Also, draw a logic diagram using discrete gates. Extra Credit: Redesign by using multiplexers and minimal discrete logic as appropriate. 1 |...
1. Design and implement a 4 bit binary to excess 3 code converter using CMOS transistors....
1. Design and implement a 4 bit binary to excess 3 code converter using CMOS transistors. (Note: Students are expected to design the circuit with truth table, solve the output expression by use of K Map or suitable circuit Reduction technique and implement using CMOS transistors.)
Design a combinational logic circuit that takes a single digit decimal number as its input and...
Design a combinational logic circuit that takes a single digit decimal number as its input and also detects if the input is an odd number. Design a combinational circuit that accepts a 3-bit number and generates an output binary number equal to the square of the input number.
Question 3: A)Design a BCD counter. -The circuit counts from 0 to 9, then resets back...
Question 3: A)Design a BCD counter. -The circuit counts from 0 to 9, then resets back to 0 to restart the counting sequence. -The circuit has one input run/stop. If the input is 1, the eounter will count. If the input is 0, the counter will freeze in its current location until the input is set to 1 again. -The circuit has one output. It becomes 1 when the counter completes a cycle and starts the next one. Otherwise, that...
Design in VHDL a gray code decoder to excess 3 code Screenshot the simulation and code.
Design in VHDL a gray code decoder to excess 3 code Screenshot the simulation and code.
Design a logic circuit that takes 2-bit input A and 2-bit input B and subtracts the...
Design a logic circuit that takes 2-bit input A and 2-bit input B and subtracts the two numbers using full adders and inverters with full adders diagram, which input is subtracted dos not matter.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT