Question

In: Electrical Engineering

1. The split phase motor is used to _____. a. provide mechanical drive to the DC...

1. The split phase motor is used to _____.

a. provide mechanical drive to the DC motor

b. produce DC voltage directly

c. provide a load for the DC motor

d. serve as a control device.

2. The purpose of the rheostat in the DC motor in this application is to ____.

a. prevent the series winding from being burned out

b. provide for output voltage control

c. limit the shunt current

d. dissipate the counter EMF

3. The device that connects the two motor shafts together is called a ____.

a. transformer

b. coupler

c. transducer

d. reducer

4. The purpose of the motor generator is used to ___.

a. convert DC voltage to AC voltage

b. convert AC voltage to DC voltage

c. reduce the effects of line loads

d. reduce ambient power losses

Expert Solution

Manojponduru answered 8 months ago

A motor apply power 10-hp split-phase motor speed at 1700 rpm is used to drive a...

A motor apply power 10-hp split-phase motor speed at 1700 rpm is used to drive a rotary pump, which operates 24 hours per day. An engineer has specified a 7-in small sheave, an 10-in large sheave, and three C112 belts. The service factor of 1.2 was augmented by 0.1 because of the continuous-duty requirement. Analyze the drive and estimate the belt life in passes and hours.

A 5 kW split-phase motor running at 1750 rev/min is used to drive a rotary pump,...

A 5 kW split-phase motor running at 1750 rev/min is used to drive a rotary pump, which operates 24 hours per day. An engineer has specified a 200 mm small sheave, and 300 mm large sheave, and B3000 belts. The service factor was 1.3. Analyze the drive and estimate: (a) center-to-center distance. (b) suitable number of belts. (c) F1, F2, Fc and Fi. (d) the factor of safety. (e) the belt life in passes

What is the difference between a capacitor- start split-phase motor and a permanent-split capacitor motor? Briefly...

What is the difference between a capacitor- start split-phase motor and a permanent-split capacitor motor? Briefly explain some of the differences between them including advantage and disadvantages of each.

Brief discuss the operation of a split phase single phase single induction motor with respect to...

Brief discuss the operation of a split phase single phase single induction motor with respect to its construction, current relationship and torque characteristics. Illustrate your answer by means of diagram

For Four Quadrant chopper DC motor Drive: A. Explain the generator action in forward direction according...

For Four Quadrant chopper DC motor Drive: A. Explain the generator action in forward direction according to: 1. Circuit 2. Waveforms 3. Principal of work B. Is it possible to discharge the load current using D3D4 switching strategy. Explain?

Suggest a DC motor drive which can cause very fast heating of an automobile? Show circuit...

Suggest a DC motor drive which can cause very fast heating of an automobile? Show circuit diagram in case of series excited motor. (2). Propose an energy efficient braking control mechanism that can be used for practical traction systems.(Hint: The supply is partly receptive)

Compare the brushed motor (DC motor) and a brushless motor (Induction Motor) in FIVE aspects.

A two pole induction motor is to be used to drive a very heavy mixer in...

A two pole induction motor is to be used to drive a very heavy mixer in the cement industry. Three phase rated voltage and frequency in Pakistan is known to be 440 V and 50 Hz respectively. This 100.56 hp machine is essentially a three- phase machine with Y configuration. You have to analyze the behavior of the machine for which one has to know the parameters of the equivalent circuit, they are mentioned below: Xm = 7.2 ohms Prise...

What is the process for reversing a DC motor?

1-Select one of the DC motor type belonging to any company and specify the motor parameters...

1-Select one of the DC motor type belonging to any company and specify the motor parameters from its catalog/datasheet. 2-Calculate the maximum inertia value of the load to be driven according to the motor inertia specified from catalog, use given rule below to specify gear ratio plugged between load and DC motor If your student id is 12568013, then u=(1+2+5+6+8+0+1+3)/5 u = = 5.2 3-The speed measured from the rotor of an asynchronous motor with 12-pole, 80 Hz is K...