The 1.3-m-diameter tank is initially filled with gasoline. There is a 3.2-cm-diameter orifice in the bottom....

The 1.3-m-diameter tank is initially filled with gasoline. There is a 3.2-cm-diameter orifice in the bottom. If the orifice is suddenly opened, estimate the time (minutes) for the fluid level to drop from 2m to 1.2 m. Use SG (gas) = 0.66, Cd = 0.63

Solutions

Expert Solution

Ally Wells answered 1 month ago

Next > < Previous

Related Solutions

A conical tank of diameter 6 m and height 10 m is filled with water. Compute...

A conical tank of diameter 6 m and height 10 m is filled with water. Compute for the work needed to pump all the water 2 m above the tank. The water has a density of 1000 kg per cubic meter.

A tank whose bottom is a mirror is filled with water to a depth of 19.4...

A tank whose bottom is a mirror is filled with water to a depth of 19.4 . A small fish floats motionless 7.10 under the surface of the water. part A) What is the apparent depth of the fish when viewed at normal incidence to the water? Express your answer in centimeters. Use 1.33 for the index of refraction of water. Part B) What is the apparent depth of the reflection of the fish in the bottom of the tank...

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm...

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm is inverted and inserted into another tank of water. If no air is allowed to escape from the glass container when submerged, what is the height of the air column in the glass tank when its edge is 2.0 m below the surface of the water?

A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated...

A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated vapor and 6.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored. Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.

A horizontal pipe 10 cm in diameter and 3000 cm long is filled with a sand...

A horizontal pipe 10 cm in diameter and 3000 cm long is filled with a sand of 20 % porosity. The permeability of the sand is estimated to be 250 md. The sand is saturated with an oil of viscosity 0.65 cp, and the same oil is injected into the sand pipe. You are asked to calculate a. What is the Darcy velocity in the sand pipe under a 100-psi pressure differential? b. What is the flow rate through the...

cylindrical container with circular hole at the bottom with diameter d , is filled with water...

cylindrical container with circular hole at the bottom with diameter d , is filled with water to height h . Which of the following statement is correct for the itime required to empty the container If d is constant , the time is inversely proportional to the height of water . If h is constant , the time is inversely proportional to the area of hole . If his constant , the time is directly proportional to the area of...

Problem 3.034 A closed, rigid tank is filled with water. Initially, the tank holds 0.4 lb...

Problem 3.034 A closed, rigid tank is filled with water. Initially, the tank holds 0.4 lb of saturated vapor and 4.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored. Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.

4. Consider a mixing tank with a volume of 50 gallons which is initially filled with...

4. Consider a mixing tank with a volume of 50 gallons which is initially filled with 10 gallons of fresh water. Suppose there is an inflow pipe which pumps in a 1 lb/gallon brine (salt/water) mixture at a rate of 4 gallons per minute, and there is an outflow pipe which removes the mixture from the tank at a rate of 2 gallons per minute. (a) Use the given information to derive an initial value problem which models the amount...

A 4 m-wide tank with height of 1.8 m filled with water is pulled with a...

A 4 m-wide tank with height of 1.8 m filled with water is pulled with a cable inclined at 30o to the horizontal. The constant acceleration value in the cable direction is 4 m/s². The water depth is measured as 1.5 m before the motion starts.  Determine the angle between the water surface and the horizontal.  Compute the maximum and minimum pressure values on the bottom of the tank.  How many volume of water are spilled?

A 5.0mm diameter hole is 1.0m m below the surface of a 2.0m diameter tank of...

A 5.0mm diameter hole is 1.0m m below the surface of a 2.0m diameter tank of water. What is the rate, in mm/min, at which the water level will initially drop if the water is not replenished? answer in mm/min

Subjects