Question

In: Mechanical Engineering

is polyurethane coating considered and organic coating? explain.

is polyurethane coating considered and organic coating? explain.

Solutions

Expert Solution

Solution:

Yes, polyurethene coatings are considered as organic coatings.

According to the nature of the binders coatings are classified as organic or inorganic coatings.

Organic Coatings:

Organic Coatings are powder paints or liquids that require several layers before a thick enough coating is achieved to inhibit corrosion. Coating should be durable and dense.

These coatings are based on carbon containing materials normally derived from refined or modified petroleum products, as well as different solvents like water, pigments, additives, and fillers.

Inorganic Coatings:

Inorganic coatings encompass surface conversion, anodizing, enamelling, metallic coatings and more.

These coatings are created through a chemical action which changes the surface layer of metal into a metallic oxide film.

Why Polyurethene coatings considered as organic coatings?

Organic coatings improve the metal surface protection by acting as a barrier to protect the underlying substrate.

Same way a  polyurethane coating is the layer of polyurethane which is applied to a material's surface in order to protect it.

A polyurethane coating can protect the base material from corrosion, weathering, abrasion and other processes that would degrade the quality of  the material over time.

A polyurethane coating can be glossy or muted, and can be opaque or transparent.

It can be enhanced with specialty additives.

Polyurethane coating products are characterized by exceptional resistance to corrosion, abrasion, chemicals and weathering processes.

Because of this versatility, you will find polyurethane used as a primer, intermediate coat or a topcoat depending on the needs of the application.

Polyurethane coatings are polymers. They are very hard and strong, providing exceptional wear resistance. Contrary they can also be more soft and ductile, so that the base material is allowed to stretch without destroying the coating. They are not flammable, so they can be used for situations where combustion is occurring in the same environment.

Polyurethane coatings are notable for their ability to adhere(adhesion) very well to a wide variety of base materials. Many polyurethane coatings require no additional processing to cure. Many polyurethane coatings have very fast setting times, and that can be applied and set for a broad range of temperatures.

Polyurethane coatings are used for variety of applications. Wood floors are generally coated with polyurethane. As polyurethane coatings can be waterproof and have high abrasion resistance, they are an excellent choice for this application.

Polyurethane coatings can be used on metals and on top of other coatings.

If you found this information useful then please upvote.

For any query please comment

Thank you in advance

Have a great day


Related Solutions

Another polymer that is receiving a lot of attention is polyurethane. What is polyurethane (include the...
Another polymer that is receiving a lot of attention is polyurethane. What is polyurethane (include the chemical functional group)? How is it polymerized (explain clearly the polymerization reaction and show the by products produced.)? What is the Tg of PU? Are there different types of polyurethanes? What is thermoplastic polyurethane elastomer?(Most Materials Science or polymer science books will have enough information for you to answer these questions. You can check Knovel for many of the books). No google search for...
Marvettas Shop applies coating finishes to a variety of materials and parts. The coating involves the...
Marvettas Shop applies coating finishes to a variety of materials and parts. The coating involves the application of powder to a surface, after which the powder is fused into a continuous film by the application of heat or radiant energy and the process results in a durable finish that resists rust. In the previous years at Matvettas Shop, finishes were applied by hand, and manufacturing overhead was allocated to jobs based on direct labor hours the rate was $10 per...
Having considered the various options for funding the organic farm, the board of OzFarm Pty. Ltd....
Having considered the various options for funding the organic farm, the board of OzFarm Pty. Ltd. has decided on a mix of debt and equity. In order to raise additional cash for its equity investment in the new project, OzFarm decides to issue additional ordinary shares and a new class of preference shares. OzFarm would like your advice on the legal rules that govern the proposed offer and issue of new shares.
briefly explain- what is the organic theory?
briefly explain- what is the organic theory?
Provide an example of steel which has been coated for protection. Explain the coating, fabrication and...
Provide an example of steel which has been coated for protection. Explain the coating, fabrication and good and bad points of the coating selection.  
UNIT EIGHT       Coating and Deposition Processes                              &
UNIT EIGHT       Coating and Deposition Processes                                                               Explain the difference between coating and cladding Describe the two main methods of painting: dipping and spraying (manual, automatic or electrostatic). State the characteristic of each method. Identify materials suitable for each method. Describe the electroplating process. List typical plating materials and give reasons for their use. Explain the process of anodizing and state typical applications. Classify vapour deposition processes into physical vapour deposition (PVD) and chemical vapour deposition (CVD). Describe the principle...
Formetal Engineering submitted to Presto a sample and specifications for precut polyurethane pads to be used...
Formetal Engineering submitted to Presto a sample and specifications for precut polyurethane pads to be used in making air-conditioning units. Formetal paid for the goods as soon as they were delivered but subsequently discovered that the pads did not conform to the sample and specifications in that there were incomplete cuts, color variances, and faulty adherence to the pad’s paper backing. Formetal then informed Presto of the defects and notified Presto that it would reject the pads and return them...
is there an easy way to explain the basic concept of organic chemistry? is there an...
is there an easy way to explain the basic concept of organic chemistry? is there an order in which to do things so i can make sense out of it?
UNIT EIGHT - ANSWER EACH QUESTION 1.  Explain the difference between coating and cladding 2. Describe the...
UNIT EIGHT - ANSWER EACH QUESTION 1.  Explain the difference between coating and cladding 2. Describe the two main methods of painting: dipping and spraying (manual, automatic or electrostatic). a) State the characteristic of each method. b) Identify materials suitable for each method. 3. Describe the electroplating process. a) List typical plating materials and give reasons for their use. 4. Explain the process of anodizing and state typical applications. 5. Classify vapour deposition processes into physical vapour deposition (PVD) and chemical...
Compare and Contrast two organic macromolecules. brief explain. Which organic molecules are always, sometimes, never water...
Compare and Contrast two organic macromolecules. brief explain. Which organic molecules are always, sometimes, never water soluble? brief explain
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT