UNIT EIGHT Coating and Deposition Processes &

UNIT EIGHT

Coating and Deposition Processes

Explain the difference between coating and cladding
Describe the two main methods of painting: dipping and spraying (manual, automatic or electrostatic).

State the characteristic of each method.
Identify materials suitable for each method.

Describe the electroplating process.

List typical plating materials and give reasons for their use.

Explain the process of anodizing and state typical applications.
Classify vapour deposition processes into physical vapour deposition (PVD) and chemical vapour deposition (CVD).
Describe the principle of each process.
Identify applications of each process.
Recognize the importance of thermal spraying.
Explain the principle of thermal spraying.
Identify typical thermal spraying processes according to the technology used to melt the coating material.:- oxyfuel flame, electric arc and plasma arc.

Expert Solution

samet mamat answered 1 year ago

UNIT EIGHT - ANSWER EACH QUESTION 1. Explain the difference between coating and cladding 2. Describe the...

UNIT EIGHT - ANSWER EACH QUESTION 1. Explain the difference between coating and cladding 2. Describe the two main methods of painting: dipping and spraying (manual, automatic or electrostatic). a) State the characteristic of each method. b) Identify materials suitable for each method. 3. Describe the electroplating process. a) List typical plating materials and give reasons for their use. 4. Explain the process of anodizing and state typical applications. 5. Classify vapour deposition processes into physical vapour deposition (PVD) and chemical...

is polyurethane coating considered and organic coating? explain.

Marvettas Shop applies coating finishes to a variety of materials and parts. The coating involves the...

Marvettas Shop applies coating finishes to a variety of materials and parts. The coating involves the application of powder to a surface, after which the powder is fused into a continuous film by the application of heat or radiant energy and the process results in a durable finish that resists rust. In the previous years at Matvettas Shop, finishes were applied by hand, and manufacturing overhead was allocated to jobs based on direct labor hours the rate was $10 per...

1. Define and understand sublimation and deposition.

1. Define and understand sublimation and deposition. 2. Define and understand fusion in the context of phase changes. 3. Use the heat of fusion, DHfus, in calculations involving energy, masses, and moles.

International Foods (IFC) currently processes seafood with a unit it purchased several years ago. The unit,...

International Foods (IFC) currently processes seafood with a unit it purchased several years ago. The unit, which originally cost $500,000, currently has a book value of $250,000. IFC is considering replacing the existing unit with a newer, more efficient one. The new unit will cost $700,000 and will also require an initial increase in net working capital of $40,000. Additionally, in order to make the new unit operational shipping and installation costs will require a further $50,000 investment. The new...

Mental and Behavioral Health Drugs; Unit Seven: Pain and Inflammation Management Drugs; Unit Eight: Antimicrobial Drugs;...

Mental and Behavioral Health Drugs; Unit Seven: Pain and Inflammation Management Drugs; Unit Eight: Antimicrobial Drugs; Unit Nine - Immunologic Drugs; Unit Ten: Antineoplastics and Biologic Response Modifiers. Summary of the Unit/Classification Minimum of three types of drugs or supplements Typical routes of administration Common side effects and adverse effects Special considerations Common Nursing interventions Teams must distill the material to only key points. The presentation may be a PowerPoint, lecture, and handouts, poster or anyway the team feels they...

From the following techniques: Thermal CVD (Chemical Vapor Deposition), Metalorganic CVD, Plasma-enhanced CVD, Atomic Layer Deposition...

From the following techniques: Thermal CVD (Chemical Vapor Deposition), Metalorganic CVD, Plasma-enhanced CVD, Atomic Layer Deposition (ALD), Plating, Sol-gel, Sputtering, Thermal evaporation, Electron beam evaporation, Molecular Beam Epitaxy (MBE), Laser ablation, Ion plating, choose one that is best suited for depositing a) 100 nm Al coating on a rolled polymer foil having width of 1 m and length of hundreds of meters, b) High purity 10 nm Au coating on a Si3N4 on Si substrate to be used as a...

1)For the evaporation, how to achieve uniform deposition rate?

Krause Company manufactures drinking glasses. One unit is a package of eight glasses, which sells for...

Krause Company manufactures drinking glasses. One unit is a package of eight glasses, which sells for $28. Krause projects sales for April will be 3,000 packages, with sales increasing by 550 packages per month for May, June, and July. On April 1, Krause has 325 packages on hand but desires to maintain an ending inventory of 20% of the next month’s sales. Prepare a sales budget and a production budget for Krause for April, May and June Krause Company Budget...

Deposition of osteoid by osteoblasts – the first step in establishment of the ECM of bone...

Deposition of osteoid by osteoblasts – the first step in establishment of the ECM of bone – requires a suitable substrate as well as presence of nearby blood vessels. These requirements suggest some features of the substrate and blood vessels are necessary to activate osteoblasts; although I do not know what these features are, presumably they include some sort of signal molecules necessary to activate osteoblasts. Given the manner in which developing bone increases in size – particularly through appositional...

Question