a cart with a mass of 100 kg is traveling down a 5% grade. the coefficient...

a cart with a mass of 100 kg is traveling down a 5% grade. the coefficient of drag of the area is Cd = 0.05 based on a frontal area of 0.6 m^2. coefficient of friction for the wheels is mu = 0.0062. Find terminal velocity? assuming started at a standstill find distance to get to terminal velocity?

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

A cart of mass m1 = 11 kg slides down a frictionless ramp and is made...

A cart of mass m1 = 11 kg slides down a frictionless ramp and is made to collide with a second cart of mass m2 = 24 kg which then heads into a vertical loop of radius 0.25 m (a) Determine the height h at which cart #1 would need to start from to make sure that cart #2 completes the loop without leaving the track. Assume an elastic collision. (b) Find the height needed if instead the more massive...

A mass of 5 kg is placed on a horizontal surface with a coefficient of kinetic...

A mass of 5 kg is placed on a horizontal surface with a coefficient of kinetic friction of 0.4. A force is applied vertically downward to it and another force of 81 Newtons is applied at 14 degrees below the horizontal. As it moves 5 meters in the +x direction it loses 180 Joules of kinetic energy. What is the amount of the force which is applied downward in Newtons?

A cart that has a mass of 325g and traveling at a speed of 12.3cm/s collides...

A cart that has a mass of 325g and traveling at a speed of 12.3cm/s collides with a stationary cart that has a mass of 678g sticking together as both carts move off. What is the initial momentum of the system? What is the initial kinetic energy of the system? What is the final speed of the carts? What is the final momentum of the system? What is the final kinetic energy of the system?

Example #2A block with mass m = 5 kg sits on a surface with a coefficient...

Example #2A block with mass m = 5 kg sits on a surface with a coefficient of static friction sk= 0.5 and a coefficient of kinetic friction uk= 0.3. a)If you can pull on the block at any angle, what minimum force is required to break static friction and cause the block to slide? b)What is the optimal angle to pull at? c)If you pull at the optimal angle with the minimum force, what will the acceleration of the block...

A frictionless cart of mass ? = 4.00 kg has a shape of a ramp with...

A frictionless cart of mass ? = 4.00 kg has a shape of a ramp with an incline angle ? = 60.0°. The ramp is pulled by a constant horizontal force ? = 15.0 N. Another frictionless cart of mass? = 2.00 kg can roll along the ramp and is attached to the top of the ramp at point ? by a spring of constant ? = 300. N/m. The spring is free to pivot without friction around point ?....

In a shipping company distribution center, an open cart of mass 50 kg is rolling to...

In a shipping company distribution center, an open cart of mass 50 kg is rolling to the left at a speed of 5 m/s. You can ignore friction between the cart and the floor. A 15 kg package slides down a chute that makes an angle of 27 degrees below the horizontal. The package leaves the chute with a speed of 3 m/s, and lands in the cart after falling for 0.75 seconds. The package comes to a stop in...

A cart for hauling ore out of a gold mine has a mass of 423 kg,...

A cart for hauling ore out of a gold mine has a mass of 423 kg, including its load. The cart runs along a straight stretch of track that is sloped 4.51

A cart for hauling ore out of a gold mine has a mass of 423 kg,...

A cart for hauling ore out of a gold mine has a mass of 423 kg, including its load. The cart runs along a straight stretch of track that is sloped 4.51° from the horizontal. A donkey, trudging along and to the side of the track, has the unenviable job of pulling the cart up the slope with a 535-N force for a distance of 159 m by means of a rope that is parallel to the ground and makes...

A block of mass m = 3.5 kg is on an inclined plane with a coefficient...

A block of mass m = 3.5 kg is on an inclined plane with a coefficient of friction μ1 = 0.23, at an initial height h = 0.46 m above the ground. The plane is inclined at an angle θ = 42°. The block is then compressed against a spring a distance Δx = 0.11 m from its equilibrium point (the spring has a spring constant of k1 = 39 N/m) and released. At the bottom of the inclined plane...

A mass of 8 kg rests on a floor with a coefficient of static friction of...

A mass of 8 kg rests on a floor with a coefficient of static friction of 0.88 and coefficient kinetic friction of 0.33. One force is applied vertically downward of 28 Newtons and another force is applied at an angle of 26 degrees below the horizontal. Calculate what the magnitude this force needs to be in order to begin to move the mass. If that force is removed and another force is applied at an angle of 26 degrees above...

Subjects