Question

In: Civil Engineering

what is Design criteria of Wall, fences and screen?

what is Design criteria of Wall, fences and screen?

Solutions

Expert Solution

Design criteria or requirements for screen, wall and fences as :-

1) The height of screen, wall and fencing is measured in a vertical line from the lowest point of contact with the ground directly adjacent to the either side.

2) There is a horizontal separation of at least 5 feet between screen, wall and fence and horizontal separation shall measured from the back face of the lower screen, wall and fence to the front face of higher screen, wall and fence.

3) If the screen, wall and fence are located on the retaining wall then the portion of retaining wall above finished grade is considered as a part of overall height of screen, wall and fence.

4) In driveways, screen, wall and fence shall be located in triangular area of either side of driveway and should not exceed height of three and one-half feet.

5) The height and location of screen, wall and fence within the required intersection sight distance.

6) screen, wall and fence limited to a height of 8 feet within front setbacks ( ranging from 10 to 35 feet in residential zones).

7) The maximum height of wall, screen and fence in front yard of single family duplex shall not exceed 48 inches.

8) The fence shall be constructed with planks not less than 6 inches in width.

9) The fence shall be constructed so that the stringer are not visible from the public rights-of-way or park facilities.

10) All materials used shall be securely fastened to ongoing attractive appearance and safe conditions.

11) Landscape elements shall be incorporated into type 3 screening fence to provide visual screening and pedestrain connectivity from neighborhood to the adjacent street sidewalks.


Related Solutions

What criteria can be used to screen and match mentors and mentee? Answer in 100-150 words.
What criteria can be used to screen and match mentors and mentee? Answer in 100-150 words.
Design a wall footing to support a 30cm − wide reinforced concrete wall with a dead...
Design a wall footing to support a 30cm − wide reinforced concrete wall with a dead load DL =293 KN/m and a live load LL = 218 KN/m. The bottom of the footing is to be 1. 2m below the final grade, the soil weighs 16 KN m3 ⁄ , the allowable soil pressure, qa = 192 KN m2 ⁄ , and there is no appreciable sulfur content in the soil. fy = 420MPa and fc′ = 21MPa, normal- weight...
Procedure 1. Place the current balance assembly on a table opposite a wall or screen which...
Procedure 1. Place the current balance assembly on a table opposite a wall or screen which is several meters away. Using the adjustable feet on the current balance, level the assembly. Make sure that the two conductors are as parallel as possible. A coin may be placed on the mass pan to hold the conductors together if adjustments of the lower conductor height are necessary. Adjust the counterpoise behind the mirror until the conductors are separated by an acceptable distance....
Design an algorithm that will read an array of 200 characters and display to the screen...
Design an algorithm that will read an array of 200 characters and display to the screen a count of the occurrences of each of the five vowels (a, e, i, o, u) in the array. Your string is: The quick brown fox jumped over the lazy dog That is the question for my pseudo code question, I don't know if I have this correct can i have someone look this over and finish this and explain what i needed to...
Class: (Sanitary Engineering) The sewer design criteria and design methods and sewer lining?
Class: (Sanitary Engineering) The sewer design criteria and design methods and sewer lining?
What does the title Fences have to do with the characters and themes in the play?...
What does the title Fences have to do with the characters and themes in the play? What literal and figurative “fences” do the characters, especially Troy Maxson, face? Why is the literal fence around the house such a source of conflict? What other “fences,” not just the literal one made of wood, might be drawn around the lives of the main characters?
Explain what are the requirements for Retaining Wall Design. Need explanation and step by step solution...
Explain what are the requirements for Retaining Wall Design. Need explanation and step by step solution and without plagrism
Give design criteria or basis for designing a foundation project
Give design criteria or basis for designing a foundation project
What is the difference between a Univariate outlier screen and a Multivariate outlier screen?
What is the difference between a Univariate outlier screen and a Multivariate outlier screen?
For preparing a design calculation for the curtain wall system of the facade of a building,...
For preparing a design calculation for the curtain wall system of the facade of a building, what is the sequence or step for whole design calculation? How many elements should be included to be calculated.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT