5) uniform linear array is required to produce an endfire beam when it is operated at...

5) uniform linear array is required to produce an endfire beam when it is operated at a
frequency of 10 GHz. It contains 50 radiators and are spaced at 0.5λ. Find the
progressive phase shift required to produce the end-fire beam. Find the array length.

Solutions

Expert Solution

This is a problem of Antenna Theory whose solution has been provided below.

Manojponduru answered 3 months ago

Next > < Previous

Related Solutions

one end of a uniform beam of mass 5 kg is mounted at the wall by...

one end of a uniform beam of mass 5 kg is mounted at the wall by hinges and the other end is held by a cable which is connected to the ceiling. The cable forms a 60 degree angle with the horizontal beam. Applying the equilibrium condition, find the force of tension at the cable and the vertical and horizontal components of the force of the hinge Fv and Fh on the beam and indicate their directions.

A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam...

A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam is supported in a horizontal position by a hinge and a cable, with angle ? = 115°. (a) Draw all the forces acting on the beam. (b) Label the axis of rotation and the position vectors of each point of action. (c) What is the tension on the cable? (d) What are the magnitude of the vertical and horizontal forces acting on the hinge?...

A 100 kg uniform beam is attached to a vertical wall at one end and is...

A 100 kg uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. Calculate the magnitude of the vertical component of the force that the wall exerts on the left end of the beam if the angle between the cable and horizontal is θ = 43°. The angle between the horizontal and the beam is 30 degrees.

Find the required amount of reinforcement required for the abdominium beam in order to support the...

Find the required amount of reinforcement required for the abdominium beam in order to support the cross-sectional bending moment MU= 525 kN·m under the counting load. Design cover thickness 40mm and stub reinforcement using D10. Compressed iron bars do not have to be surrendered, and the size of the cross-section can only be increased if the design is not possible under the given conditions. b = 320 mm, h = 550 mm, fck = 32 MPa, fy= 450 MPa, Using...

Calculate the minimum prestressing force required for Beam 1 knowing that the beam has a cross...

Calculate the minimum prestressing force required for Beam 1 knowing that the beam has a cross sectional area of 200 × 500 mm and an allowable stress of 0.3 N/mm2 . External Load applied in Tons/m is 150

A linear accelerator produces a pulsed beam of electrons. The current is 1.6 A for the...

A linear accelerator produces a pulsed beam of electrons. The current is 1.6 A for the 0.1 μs duration for each pulse. How many electrons are accelerated in each pulse? What is the average current of the beam if there are 1000 pulses per second? If each electron acquires an energy of 400 MeV, what is the average power output of the accelerator? Assume there are 1000 pulses per second for the accelerator. What is the peak output power? Hint:...

c++ give ways of filling array of uniform random numbers

5) Except when required by the equal dignity rule, a written agreement is not required to...

5) Except when required by the equal dignity rule, a written agreement is not required to create an agency relationship. True False 6) Under the UCC, when one party makes an offer, the offeree's acceptance must match the offer's exact terms to be valid. True False 7) Article 2 of the Uniform Commercial Code applies to which of the following transactions? A. Tito’s sale of legal services to Janet. B. Tito’s sale of his 1958 Edsel automobile to Janet. C....

A 1220-N uniform beam is hinged at a vertical wall at one end and is supported...

A 1220-N uniform beam is hinged at a vertical wall at one end and is supported by a cable that is attached to the beam at the other end. A 200-kg load hangs at the end of the beam. The lower end of the beam makes an angle of 30° above the horizontal, while the supporting cable is attached to the wall at an angle of 40°, as shown. (a) Calculate the magnitude of the tension in the supporting cable....

A uniform beam of mass MB = 0.8833 kg and length l = 0.8m is attached...

A uniform beam of mass MB = 0.8833 kg and length l = 0.8m is attached to a wall by a hinge at at one end and by a cord of negligible mass and length ls = 1.27 m that makes an angle ? with the horizontal at the other end (see figure drawn on the board), such that the beam is horizontal. A mass mH = 0.55 kg is hung from the beam at a distance lH = 0.6...

Subjects