The RF amplifier of a receiver has an input resistance of 1 kΩ, and equivalent shot...

The RF amplifier of a receiver has an input resistance of 1 kΩ, and equivalent shot noise resistance of 2 kΩ, a gain of 25, and a load resistance of 125 kΩ. Given that the bandwidth is 1.0 MHz and the temperature is 20 °C. If this receiver is connected to an antenna with an impedance of 75 Ω, calculate the noise figure. (in dB)

Solutions

Expert Solution

Manojponduru answered 1 month ago

Next > < Previous

Related Solutions

a) Draw the Integral Receiver circuit with input resistance (R1) 5 KΩ, feedback capacitor (CF) 10...

a) Draw the Integral Receiver circuit with input resistance (R1) 5 KΩ, feedback capacitor (CF) 10 nF and feedback resistance (RF) 100 KΩ. b) In the case of applying a signal in the square wave form with ± 1 V and a frequency of 1 kHz as the input voltage, show whether the circuit will function or not. c) Draw the output voltage (Vo) waveform with the input voltage on a scale.

Why we need high gain Receiver RF Amplifier? Justify with an example.

You have three 1.3 kΩ resistors. A.) What is the value of the equivalent resistance for...

You have three 1.3 kΩ resistors. A.) What is the value of the equivalent resistance for the three resistors connected in series? B.) What is the value of the equivalent resistance for a combination of two resistors in series and the other resistor connected in parallel to this combination? C.) What is the value of the equivalent resistance for a combination of two resistors in parallel and the other resistor connected in series to this combination? D.) What is the...

A process manufacturing resistors whose specifications are 1 kΩ ± 0.2 kΩ. The resistance of these...

A process manufacturing resistors whose specifications are 1 kΩ ± 0.2 kΩ. The resistance of these parts is known to follow a normal distribution with a mean of 1.03 kΩ and a standard deviation of 0.08 kΩ. a. What is the probability that a randomly selected resistance does not meet the specifications? (5pts) b. If 10 resistors are selected at random, what is the probability that there will be at least 1 out of specification? (3pts) c. If 16 resistors...

A process manufacturing resistors whose specifications are 1 kΩ ± 0.2 kΩ. The resistance of these...

A process manufacturing resistors whose specifications are 1 kΩ ± 0.2 kΩ. The resistance of these parts is known to follow a normal distribution with a mean of 1.03 kΩ and a standard deviation of 0.08 kΩ. to. What is the probability that a randomly selected resistance does not meet the specifications? b. If 10 resistors are selected at random, what is the probability that there will be at least 1 out of specification? c. If 16 resistors are selected...

Design a common-emitter amplifier that has a dc input value of 15v and that meets the...

Design a common-emitter amplifier that has a dc input value of 15v and that meets the following requirements 1. a gain of at least 80 2. low frequency -3dB less than 100Hz

What is the equivalent resistance for the circuit shown in the figure? (Figure 1) For the...

What is the equivalent resistance for the circuit shown in the figure? (Figure 1) For the circuit shown in the figure, find the current through resistor R1=6.0?(left). (Figure 1) For the circuit shown in the figure, find the potential difference across resistor R1=6.0?(left). For the circuit shown in the figure, find the current through resistor R2=15?. For the circuit shown in the figure, find the potential difference across resistor R2=15?. For the circuit shown in the figure, find the current...

1. Linearity a desirable property in an audio amplifier True False 2. Generally, an amplifier has...

1. Linearity a desirable property in an audio amplifier True False 2. Generally, an amplifier has a more nearly linear response than a loudspeaker True False

When resistors 1 and 2 are connected in series, the equivalent resistance is 14.4 Ω. When...

When resistors 1 and 2 are connected in series, the equivalent resistance is 14.4 Ω. When they are connected in parallel, the equivalent resistance is 2.69 Ω. What are (a) the smaller resistance and (b) the larger resistance of these two resistors?

1. Show that when two equal resistances are connected in parallel the equivalent resistance is just...

1. Show that when two equal resistances are connected in parallel the equivalent resistance is just one half that of either resistor. 2. Suppose that we replaced one of the bulbs in the setup with one rated at 6V, 7.5W. show that a 1A fuse in the circuit would blow out when this bulb is given power. What is the operating resistance of the filament in this bulb? Show Calculation

Subjects