A Y- connected, 460- V, 1710- rpm, 60- Hz, 4- pole squirrel cage induction motor has...

A Y- connected, 460- V, 1710- rpm, 60- Hz, 4- pole squirrel cage induction motor has a rotor current at starting 6 times the rotor current at full load. Calculate:

a. The starting torque as percent of full load torque.
b. The slip and speed at which the motor develops maximum torque.
c. The maximum torque developed b the motor as percent of its full load value.

Solutions

Expert Solution

Manojponduru answered 3 months ago

Next > < Previous

Related Solutions

A 3 phase 460 V, 60 Hz, 4 pole, delta connected induction motor has the following...

A 3 phase 460 V, 60 Hz, 4 pole, delta connected induction motor has the following equivalent circuit parameters. Rs = 0.42 Ω, Rr = 0.23 Ω, Xs = Xr = 0.82 Ω. Xm = 22 Ω. The no load loss = 60 W and may be assumed constant. The rotor speed is 1750 rpm. Use the approximate equivalent circuit ( i.e. the Xm branch is at the very left of the circuit) determine the following a. the synchronous speed...

A three-phase, 460-V, 60-Hz, six-pole Y-connected induction motor has Rs = 0.32 Ω, R′ r =...

A three-phase, 460-V, 60-Hz, six-pole Y-connected induction motor has Rs = 0.32 Ω, R′ r = 0.18 Ω, Xs = 1.04 Ω, X′ r = 1.6 Ω, and Xm = 18.8 Ω. The no-load loss, Pno load, is negligible. The load torque, which is proportional to speed squared, is 180 N#m at 1180 rpm. If the motor speed is 850 rpm, determine (a) the load torque demand TL; (b) the rotor current I′ r; (c) the stator supply voltage Va;...

Q3) A three-phase, Y-connected, 220 V, 13 kW, 60 Hz, six-pole induction motor has the following...

Q3) A three-phase, Y-connected, 220 V, 13 kW, 60 Hz, six-pole induction motor has the following parameter values in Ω/phase referred to the stator: R1 = 0.3 Ω. R2' = 0.15 Ω X1 = 0.5 Ω. X2'= 0.21 Ω Xm = 13.25 Ω The total rotational losses are 450 W. The core loss is lumped in with the rotational losses. For a slip of 0.02, and based on approximate equivalent circuit, determine: (i) The rotor speed. (ii) The stator current....

A 60-Hz, 208-V, 2 pole wye connected induction motor is rated at 15hp. The equivalent parameters...

A 60-Hz, 208-V, 2 pole wye connected induction motor is rated at 15hp. The equivalent parameters are as follows: RS = 0.2 Ω RR’ = 0.120 Ω XS = XR’ = 0.41 Ω Xm = 15 Ω The machine has negligible miscellaneous losses but experiences mechanical loss and core loss of 250 W and 180 W, respectively. For a slip of 5 %, determine a) The line current. (44.8  -25.5  A) b) The stator copper losses (1.205 kW)...

A 3-phase, 380 V, 50 Hz , 6 pole, Y-connected induction motor has R1 = 0.1...

A 3-phase, 380 V, 50 Hz , 6 pole, Y-connected induction motor has R1 = 0.1 W , X1 = 0.4 W, R2’ = 0.12 W , X2’ = 0.4 W, Xm = 20 W , Pr = 1 kW. The motor is operated at 970 rpm what is the efficiency?

A three phase 30 hp 460 volt 60 hz, 1770 rpm design B induction motor with...

A three phase 30 hp 460 volt 60 hz, 1770 rpm design B induction motor with class F insulation and service factor of 1.0 is operating at rated shaft load in a 40 degree C environment and has an expected 20 yr life. A maintenance check shows line to line voltages to be 449.2 V, 431.3 V and 462.4 volts. The percent unbalanced voltage for this motor is: the expected temperature rise equals? The expected insulation life equals? the rerating...

The parameters of a 3-phase, 4-pole, 50 Hz, Y-connected, wound-rotor induction motor are listed below. These...

The parameters of a 3-phase, 4-pole, 50 Hz, Y-connected, wound-rotor induction motor are listed below. These are the default values of the “Asynchronous Machine” model in MATLAB Simulink. r1=0.5968 ?; r2=0.6258 ?; L1=0.0003495 H; L2=0.005473 H; Lm=0.0354 H; Stator line voltage = 400 V rms. The motor for rotor speeds nm= 0 to 1500 rpm. X1= 0.1097 ohm, X2= 1.719 ohm , Xm= 11.12 ohm, RTH = 0.5853 , XTH = 0.1395 and VTH = 230.82 V. Suppose the motor...

Tests were carried out on a three-phase 220 V, 50 Hz, 4-pole delta-connected induction motor. The...

Tests were carried out on a three-phase 220 V, 50 Hz, 4-pole delta-connected induction motor. The following results were obtained from open circuit (no-load) and short circuit tests. Open Circuit (no-load) Test Applied Stator Voltage VLine (V) Stator Line Current ILine (A) Total Input Power Pin (W) 240 9.6 536 220 7.2 420 200 5.4 352 180 4.3 304 160 3.5 276 140 3.0 248 120 2.5 224 Short Circuit (locked rotor) Test Applied Stator Voltage VLine (V) Stator Line...

A 50-Hz, 440-V, 2 pole wye connected induction motor is rated at 75 kW. The equivalent...

A 50-Hz, 440-V, 2 pole wye connected induction motor is rated at 75 kW. The equivalent parameters are as follows: RS = 0.075 Ω RR’ = 0.065 Ω XS = XR’ = 0.17 Ω Xm = 7.2 Ω The losses associated with the machine are field and winding, miscellaneous and core loss with values of 1 kW, 150 W and 1.1 kW, respectively. For a slip of 4 %, determine a) The line current. (150.39  -23.08 A) b) The...

A 50-Hz, 440-V, 6 pole wye connected induction motor is rated at 75 kW. The equivalent...

A 50-Hz, 440-V, 6 pole wye connected induction motor is rated at 75 kW. The equivalent parameters are as follows: RS = 0.082 Ω; RR’ = 0.07 Ω; XS = 0.19 Ω; XR’ = 0.18 Ω; XM = 7.2 Ω The losses associated with the machine are field and winding, miscellaneous and core loss with values of 1.3 kW, 150 W and 1.4 kW, respectively. For a slip of 4 %, determine: a) The line current b) The stator power...

Subjects