Question

In: Civil Engineering

The building is going to be made in eastern part of Anatolia (Eastern part of Anatolia...

The building is going to be made in eastern part of Anatolia (Eastern part of Anatolia means there is a risk of freezing and thawing) and carbonation induced corrosion at low level is the dominant exposure condition. Choose the proper exposing conditions for this case by using the TS EN 206 Concrete Standard. Also determine the corresponding minimum requirements for the concrete mixture in the given environment by using the same standard.

Solutions

Expert Solution


Related Solutions

Ace Builders, a home building company based in the North-Eastern part of the US, has been...
Ace Builders, a home building company based in the North-Eastern part of the US, has been noticing increasing demand for family- friendly housing with several amenities in dense urban centers such as New York, Boston and Philadelphia. Ace Builders realizes that their direct competitor, Beta Builders, is already meeting this growing demanding because they quickly converted, in downtown Boston, a brand new building for studio apartments into 2 and 3 bedroom apartments, which have sold out in days. Ace Builders...
Raul Martinas, a professor of languages at Eastern University, owns a small office building adjacent to...
Raul Martinas, a professor of languages at Eastern University, owns a small office building adjacent to the university campus. He acquired the property 10 years ago at a total cost of $669,500—that is, $90,500 for the land and $579,000 for the building. He has just received an offer from a realty company that wants to purchase the property; however, the property has been a good source of income over the years, and so Martinas is unsure whether he should keep...
Raul Martinas, a professor of languages at Eastern University, owns a small office building adjacent to...
Raul Martinas, a professor of languages at Eastern University, owns a small office building adjacent to the university campus. He acquired the property 10 years ago at a total cost of $530,000—that is, $50,000 for the land and $480,000 for the building. He has just received an offer from a realty company that wants to purchase the property; however, the property has been a good source of income over the years, and so Martinas is unsure whether he should keep...
The concreting is going to be made for precast concrete. Choose the proper workability for the...
The concreting is going to be made for precast concrete. Choose the proper workability for the fresh concrete (find from the reference books and standards, and mention your reference in the homework report). Design an experiment to measure the workability of the concrete. Mention the method you are going to use to measure the workability and give the aimed value planned to obtain with the chosen method. Explain the experiment.
A developer is going to build a new commercial building in Kowloon Tong. The features of...
A developer is going to build a new commercial building in Kowloon Tong. The features of the building are described as follows: Number of storey: 25 floors Floor areas: approx. 600m2 (each floor) Core areas: approx. 100m2 (each floor) G/F to 2/F: Restaurant premises (40% of the UFA); Retail establishments (60% of the UFA) 3/F to 25/F: Office premises Note: UFA denotes Usable Floor Area i ) Calculate the total cooling load for a given building. This part fulfills the...
On EXCEL 1-You are going to buy a $350,000 building in cash and will depreciate the...
On EXCEL 1-You are going to buy a $350,000 building in cash and will depreciate the asset over 30 years. Assume the building value will increase 2% per year each year for 20 years. If inflation is constant at 2.2% per year, what is the opportunity cost of the building? 2. You give a loan to your friend to buy equipment for his business. The friend puts $4000 of their own money as a down payment, you lend them $12,000....
The columns for a building in central Long Island are to be made of concrete with...
The columns for a building in central Long Island are to be made of concrete with the following specifications: • Design compressive strength: 4500 psi, based on 20 tests of samples having a standard deviation of 600 psi • Non-air entrained, and clear space between rebar: 1.5 inch • Fine aggregate: G = 2.350, FM = 2.5 • Coarse aggregate: G = 2.65, bulk density = 3000 lb/cy Determine the following: i. w/c ratio, largest nominal max. coarse aggregate size,...
The columns for a building in central Long Island are to be made of concrete with...
The columns for a building in central Long Island are to be made of concrete with the following specifications: • Design compressive strength: 4500 psi, based on 20 tests of samples having a standard deviation of 600 psi • Non-air entrained, and clear space between rebar: 1.5 inch • Fine aggregate: G = 2.350, FM = 2.5 • Coarse aggregate: G = 2.65, bulk density = 3000 lb/cy Determine the following: i. w/c ratio, largest nominal max. coarse aggregate size,...
USING MATLAB Part 2: Insert coins For this part, you are going implement the code that...
USING MATLAB Part 2: Insert coins For this part, you are going implement the code that asks the user to enter coins until they have entered enough for the NAU power juice. Open the insert_coins.m file. Initialize total to 0. We do this because initially, no coins have been entered. Using a loop, ask the user to enter a coin until the total matches or exceeds 115 cents. The input should be a char or string, so make sure that...
Why are accurate plant models (made of plastic parts) no longer made as part of
Why are accurate plant models (made of plastic parts) no longer made as part of the design process? What function did these models play and how is this function now achieved?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT