Question

In: Civil Engineering

3. Determine the available strength of two 3/8 in fillet welds that are loaded parallel to...

3. Determine the available strength of two 3/8 in fillet welds that are loaded parallel to their length, are 10 inches long and are made from E70 electrodes. Determine the design strength by (a) LRFD and (b) ASD. [10.11- 25]

4. If the welds of the problem #3 above were loaded at their centroid and at 90 degrees to the weld length, determine the design strength by (a) LRFD and (b) ASD. [10.11- 29]

Solutions

Expert Solution


Related Solutions

Consider a pair of 3/8 in welds that are each 10 in long. Determine the strength...
Consider a pair of 3/8 in welds that are each 10 in long. Determine the strength if these two welds if: They are loaded parallel to their length They are loaded perpendicular to their length Do not consider simplifying assumptions Consider an L5x3x1/2 supporting 45 kip dead load and 30 kip live load. It is being welded to an ASTM A36 PL5/8x8. Design and proportion the weld to make this a simple welded connection. The leg of the weld should...
Design an experiment to determine the strength of the magnetic field of Earth using the available...
Design an experiment to determine the strength of the magnetic field of Earth using the available equipment. Available equipment: A large coil of wire (with stand in the center), compass, ammeter, 10Ω and 50Ω resistors, power supply, ruler. A) Perform the experiment and record your measurement and calculations in an appropriate format. Be explicit about what model you're using to calculate the magnetic field. Vector diagrams may assists you. Include important measurements. Determine the magnitude of the Earth's magnetic field....
Design an experiment to determine the strength of the magnetic field of Earth using the available...
Design an experiment to determine the strength of the magnetic field of Earth using the available equipment. Available equipment: A large coil of wire (with stand in the center), compass, ammeter, 10Ω and 50Ω resistors, power supply, ruler. A) Perform the experiment and record your measurement and calculations in an appropriate format. Be explicit about what model you're using to calculate the magnetic field. Vector diagrams may assists you. Include important measurements. Determine the magnitude of the Earth's magnetic field....
8. Determine the ionic strength of the solution and the activity coefficients for each ion in...
8. Determine the ionic strength of the solution and the activity coefficients for each ion in a solution containing 0.01 M NaCl, 0.005 M Ca(OH)2, and 0.01 M MgSO4
How can you determine if two lines are parallel, perpendicular, or neither ?
How can you determine if two lines are parallel, perpendicular, or neither ?
Determine whether the following two lines are parallel, intersecting, or skew. If they are skew, find...
Determine whether the following two lines are parallel, intersecting, or skew. If they are skew, find the distance between them L1 : x = 3 + 2t, y = 4 − 3t, z = −1 − 4t and L2 : 1 + 2s, y = 2 + s, z = 3 + 2s
Determine whether the following two lines are parallel, intersecting, or skew. If they are skew, find...
Determine whether the following two lines are parallel, intersecting, or skew. If they are skew, find the distance between them L1 : x = 3 + 2t, y = 4 − 3t, z = −1 − 4t and L2 : 1 + 2s, y = 2 + s, z = 3 + 2s
Determine whether the lines ?1:?=6+3?,?=6+2?,?=13+4? and ?2:?=−11+4??=−8+4??=−13+7? intersect, are skew, or are parallel. If they intersect,...
Determine whether the lines ?1:?=6+3?,?=6+2?,?=13+4? and ?2:?=−11+4??=−8+4??=−13+7? intersect, are skew, or are parallel. If they intersect, determine the point of intersection; if not leave the remaining answer blanks empty.
1. Two parallel cables are separated a distance of 3 cm in a length of 10...
1. Two parallel cables are separated a distance of 3 cm in a length of 10 cm. One cable carries a current of 2 A and the other 3 A. Calculate the force between the two cables. If the currents in the cables have the same direction, will the cables tend to separate or join? Make a diagram.
3. Cardura tablets are available in 1, 2, 4, and 8 mg tablets. If 2 mg...
3. Cardura tablets are available in 1, 2, 4, and 8 mg tablets. If 2 mg tablets were     available, how many tablets would you administer to the patient? 4. Digoxin is available in 0.125 mg tablets. How many tablets would you     administer to the patient at 10 a.m. on 7/9/01? 5. Inderal is available in 0.02 g tablets. How many tablets will you administer to      the patient in a 24-hour period? • Digoxin 0.5 po mg 12...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT