Question

In: Civil Engineering

a 3-barrel culvert is constructed of identical 60-inch diameter concrete pipes the entrance has a headwall...

a 3-barrel culvert is constructed of identical 60-inch diameter concrete pipes the entrance has a headwall and square edges the culvert length is 200 ft with a slope of .010 assuming the culvert does not overtop

a) if the total flow rate is 780 cfs calculate the headwater elevation

Solutions

Expert Solution

in the given question the answer has been hand written with a table for reference has been provided with best of my knowledge

Ally Wells answered 5 months ago
Next > < Previous

Related Solutions

A circular concrete culvert has a diameter D = 4 ft, bottom slope S = 0.01,...
A circular concrete culvert has a diameter D = 4 ft, bottom slope S = 0.01, and length L = 100 ft. The culvert inlet is grooved with a headwall and is not mitered. Determine the maximum discharge this culvert can convey under inlet control conditions if the headwater depth, HW, is not to exceed 6.0 ft.
Please answer the question: A 24 inch diameter spirally reinforced concrete column with a 1.5 inch...
Please answer the question: A 24 inch diameter spirally reinforced concrete column with a 1.5 inch cover to the spiral is reinforced with Grade 60 bars and has a concrete compressive strength of 5,000 psi. Determine the required diameter and pitch of the spiral reinforcement.
A 2-lane highway is to be constructed across a 6-ft diameter metal culvert which is oriented...
A 2-lane highway is to be constructed across a 6-ft diameter metal culvert which is oriented perpendecular to the highway center line. The culvert is located at station 33+00, and the invert (bottom) of the culvert has an elevation of 150 ft. The elevation of station 21+00 on the tangent alignment is 140 ft. The alignment gradient is +4.0% from station 21+00 to station 29+00, and the gradient from station 29+00 to 37+00 is –3%. Find the longest full station...
An existing 36-inch diameter concrete gravity sewer installed on a slope of 0.25% currently conveys a...
An existing 36-inch diameter concrete gravity sewer installed on a slope of 0.25% currently conveys a peak flow rate of 12 cfs. A builder proposes to connect a new residential development to this existing sewer. Projected peak flow from this new development is 4 cfs. a) Depth of flow in sewer before new development is connected b) Depth of flow in sewer after new development is connected c) Flow velocity in sewer after new development is connected d) Flow type...
An existing 36-inch diameter concrete gravity sewer installed on a slope of 0.25% currently conveys a...
An existing 36-inch diameter concrete gravity sewer installed on a slope of 0.25% currently conveys a peak flow rate of 12 cfs. A builder proposes to connect a new residential development to this existing sewer. Projected peak flow from this new development is 4 cfs. a) Depth of flow in sewer before new development is connected b) Depth of flow in sewer after new development is connected c) Flow velocity in sewer after new development is connected d) Flow type...
A company advertises that the mean diameter of pipes is 3 inches however, a consumer agency...
A company advertises that the mean diameter of pipes is 3 inches however, a consumer agency believes that the mean diameter of these pipes is larger. A random sample of N = 36 pipes is taken and it is found the the sample mean diameter is 3.15 inches with a sample standard deviation of S = .2 inches. Test this hypothesis at 95% significance level. Your conclusion is: Fail to reject the null Reject the null
Water flows upward and then is discharged to the right through a 3 inch diameter pipe...
Water flows upward and then is discharged to the right through a 3 inch diameter pipe elbow, at a steady flow rate of 1 cubic foot per second, the gage pressure at the entrance to the elbow is 30 psi. What vertical and horizontal force is necessary to hold the elbow stationary, neglecting any required torque.
Water flows through a 3 inch diameter pipe at a velocity of 10 ft/s. Find the...
Water flows through a 3 inch diameter pipe at a velocity of 10 ft/s. Find the a) volume flow rate in cfs(cubic feet per second) and gpm(gallons per minute) b) mass flow rate in slug/second.
You have a nominal 3-inch diameter steel pipe, 15 feet high that is embedded into a...
You have a nominal 3-inch diameter steel pipe, 15 feet high that is embedded into a concrete foundation. Neglecting the weight of the column, answer the questions below: A. What is the maximum vertical load this pipe can support/critical load (#)? B. If a vertical load of 2,000#s and a horizontal force of 100#s are applied at the top of the column, what are the maximum combined tensile and compressive stresses (psi) where the column meets its foundation? Are they...
A circular concrete pile has a low displacement driven with a diameter of 40 cm and...
A circular concrete pile has a low displacement driven with a diameter of 40 cm and a length of 15 m is impeded in a sandy soil. The values of the standard penetration number are assigned for each 1 m depth from top to bottom and these numbers are: 6, 7, 9, 8, 12, 13, 12, 15, 15, 13, 18, 22, 28, 30, 27, 12, 15, 16, 30, 27. Fine the allowable pile capacity of this pile by using Meyerhof’s...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT