Question

In: Physics

A conveyor belt is driven by a 15" diameter pulley. The conveyor starts from rest and...

A conveyor belt is driven by a 15" diameter pulley. The conveyor starts from rest and accelerates at a constant rate to 100 RPM in 4 seconds, stays at that speed for 3.2 seconds, and then slows to a stop at a constant rate in 3.9 seconds.

a) How far will an object on the conveyor travel during this time?

b) What is the maximum speed of the belt?

Solutions

Expert Solution

***************************************************************************************************
This concludes the answers. If you need any more clarification, modification or correction, feel free to ask.


Related Solutions

A cylindrical shell of mass 2.0 kg and diameter 15 cm starts to rotate from rest...
A cylindrical shell of mass 2.0 kg and diameter 15 cm starts to rotate from rest around its central axis with a constant angular acceleration. It takes 2 minutes for the cylindrical shell to make 30 revolutions. A) Find the magnitude of the net torque exerted on the cylindrical shell when the cylindrical shell made 30 revolutions from rest? B) Find the magnitude of the total linear acceleration when the cylindrical shell made 20 revolutions from rest. C) Find the...
In a belt drive the motor pulley has a diameter of 250 mm and rotates at...
In a belt drive the motor pulley has a diameter of 250 mm and rotates at 420 RPM. The machine pulley diameter is 350mm. a) Determine the linear velocity of the belt and the rotational frequency of the machine pulley. b) If the motor pulley accelerates from rest at 2 rads/s^2 how long does it take the motor pulley to reach 420 RPM.
A vertical wheel with a diameter of 39 cm starts from rest and rotates with a...
A vertical wheel with a diameter of 39 cm starts from rest and rotates with a constant angular acceleration of 7.2 rad/s2 around a fixed axis through its center counterclockwise. a) Through what angle (in degrees) has the point initially at the bottom of the wheel traveled when t = 14 s? (Indicate the direction with the sign of your answer.) b) What is the point's total linear acceleration at this instant? (Enter the magnitude in m/s2.
A Ferris wheel with a diameter of 35.0 m in , starts from rest and achieves...
A Ferris wheel with a diameter of 35.0 m in , starts from rest and achieves its maximum operational tangential speed of 2.20 m/s in a time of 15.0 s. a.) what is the magnitude of the wheel
1. A 0.750 kg hollow sphere with a diameter of 25 cm diameter starts from rest...
1. A 0.750 kg hollow sphere with a diameter of 25 cm diameter starts from rest at the top of a 65 cm tall incline. There is just enough friction on the incline to make the sphere roll instead of slide. (a) What types of energy does the sphere have at the top? at the bottom? (b) What is the moment of inertia of the sphere? (c) What is the velocity of the sphere when it reaches the bottom of...
A 1500 kg car starts from rest and drives around a flat 50-m-diameter circular track. The...
A 1500 kg car starts from rest and drives around a flat 50-m-diameter circular track. The forward force provided by the car’s drive wheels is a constant 1000 N. A. What are the magnitude and direction of the car’s acceleration at t = 10 s? Give the direction as an angle from the r-axis. B. If the car has rubber tires and the track is concrete (use book or other reference to find coefficients of friction), at what time does...
A 150-mm-wide polyamide F-1 flat belt is used to connect a 50-mm-diameter pulley to drive a...
A 150-mm-wide polyamide F-1 flat belt is used to connect a 50-mm-diameter pulley to drive a larger pulley with an angular velocity ratio of 0.5. The center-to-center distance is 2.7 m. The angular speed of the small pulley is 1750 rev/min as it delivers 1.5 kW. The service is such that a service factor Ks of 1.25 is appropriate. (a) Estimate the centrifugal tension Fc and the torque T. (b) Estimate the allowable F1, F2, and Fi. c) Check the...
QUESTION 1 A. Gravel is being dumped from a conveyor belt at a rate of 10...
QUESTION 1 A. Gravel is being dumped from a conveyor belt at a rate of 10 cubic feet per minute. It forms a pile in the shape of a right circular cone whose base diameter and height are always the same. How fast is the height of the pile increasing when the pile is 11 feet high? Recall that the volume of a right circular cone with height h and radius of the base r is given by V= 1/3...
Sand from a stationary hopper falls on a moving conveyor belt at the rate of 4.60...
Sand from a stationary hopper falls on a moving conveyor belt at the rate of 4.60 kg/s as in fig. P9.72. The conveyor belt is supported be frictionless rollers and moves at a constant speed of v = 0.820 m/s under the action of a consant horizontal external force Fext supplied by the motor that drives the belt. (a) Find the sand's rate of change of momentum in the hortizontal direction. N (B) Find the force of friction exerted by...
A car start from rest and travels towards a jeep. the jeep starts from rest at...
A car start from rest and travels towards a jeep. the jeep starts from rest at the same time with the car and travels toward the car. the car and jeep is 10 km apart. if the acceleration of the jeep and the car are 4 m/s^2 and 7 m/s^2 repectively, when and where will they meet?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT