Question

Use Packet Tracer to complete the following labs. Answer the questions and record screenshots in a Word document labeled firstInitial+LastName+Communications.

In this lab, students will explore how ping, traceroute, and the default gateway setting affect device communication.

Execute this lab according to the following guidelines:

1. Configure all devices on the network with the following IP addresses:

Device	IP Address
Wrk1	192.168.15.1
Wrk2	192.168.15.2
Sidon1	192.168.15.250
Eden Fa0/0	192.168.15.254
Eden Fa0/1	192.168.16.254
Sidon2	192.168.16.2
Wrk12	192.168.16.1

2. Open the command prompt for the Wrk1 device. Verify that you can ping the Wrk2 device.
3. Use the tracert command on Wrk1 and trace the route to Wrk2.
4. On the Sidon1 switch, use the show ip interface brief command.
5. From the Sidon1 switch, try to ping Wrk1.
6. Configure the Sidon1 switch with the following IP address: 192.168.1.9 with a mask of 255.255.255.0
7. From the Sidon1 switch, try to ping Wrk1.
8. On Wrk1, try to ping Wrk2.
9. Change the IP address on Sidon1 to the correct IP address noted in the table above.
10. From the Sidon1 switch, try to ping Wrk1.
11. On Wrk1, use tracert to trace the path between Wrk1 and Wrk2.
12. On Sidon1, try to ping the Eden Fa0/0 interface.
13. After fixing the problem, verify that the Sidon1 switch can communicate with the Eden router.
14. On Wrk1, try to ping Wrk12.
15. On Sidon1, try to ping Wrk12.
16. On Sidon1, configure 192.168.11.254 as the default gateway.
17. From Sidon1, try to ping Wrk12.
18. On Wrk1, use tracert to trace the path between Wrk1 and Wrk12.

Each component included in Diagram 2 needs to be correctly configured and carries equal percentage of the total allotted points for the entire assignment.

Diagram 2

(Courtesy of Cisco Systems, Inc. Unauthorized use not permitted.)

Documentation

Create a zipped file called firstInitial+LastName+Communications containing the following items:

1. All documentation to be submitted to the learning management system for the assignment.
2. The completed Packet Tracer assignment.

Answer 1

if any query , please comment. I will resolve all.

Please,please rate upvote.

Thank you.

1. Configure all devices on the network with the following IP addresses:

Device	IP Address
Wrk1	192.168.15.1
Wrk2	192.168.15.2
Sidon1	192.168.15.250
Eden Fa0/0	192.168.15.254
Eden Fa0/1	192.168.16.254
Sidon2	192.168.16.2
Wrk12	192.168.16.1

2. Open the command prompt for the Wrk1 device. Verify that you can ping the Wrk2 device.

1. Use the tracert command on Wrk1 and trace the route to Wrk2.On the Sidon1 switch, use the show ip interface brief command.

From the Sidon1 switch, try to ping Wrk1.

Configure the Sidon1 switch with the following IP address: 192.168.1.9 with a mask of 255.255.255.0

1. From the Sidon1 switch, try to ping Wrk1.
2. On Wrk1, try to ping Wrk2.
3. Change the IP address on Sidon1 to the correct IP address noted in the table above.

1. From the Sidon1 switch, try to ping Wrk1.
2. On Wrk1, use tracert to trace the path between Wrk1 and Wrk2.
3. On Sidon1, try to ping the Eden Fa0/0 interface.
4. After fixing the problem, verify that the Sidon1 switch can communicate with the Eden router.

1. On Wrk1, try to ping Wrk12.
2. On Sidon1, try to ping Wrk12.
3. On Sidon1, configure 192.168.11.254 as the default gateway.
4. From Sidon1, try to ping Wrk12.
5. On Wrk1, use tracert to trace the path between Wrk1 and Wrk12.