For a slab with overall dimensions of 40m x 45m, locate the columns and the beams....

For a slab with overall dimensions of 40m x 45m, locate the columns and the beams. Choose dimensions that allow using the ACI coefficients. The slab may be solid with drop beams (1m wide representative slab strip treated as rectangular, and drop beam treated as T-section), or ribbed with hidden beams (ribs treated as T-sections and beams treated as rectangular).

Assume all columns are 50cm x 50cm.

Dead load is that of the slab, in addition to 1cm tiles, 3cm mortar, and 10cm fill. Live load is

2 0.5 t/m .

Add 0.25 t/m2 to the live load for partitions.

Use fc’ = 28 MPa fy = 420 MPa

Design the slab and the beams for flexure and shear.

Development length requirements must be followed to determine the required bar lengths.

Submit all your analysis and design calculations neatly. Use appropriate plans and sections to present your design.

Expert Solution

Ally Wells answered 11 months ago

Determine the number of pounds of joists, beams, and columns needed for the roof in Figure...

Determine the number of pounds of joists, beams, and columns needed for the roof in Figure 13.18. The columns are 17 feet high and weigh 76 pounds per foot. Complete Chapter 14 Review Question 11, 12, 13, 26, and 27. Estomatinf in buiding costruction 9 ed Complete Chapter 14 Review Question 11, 12, 13, 26, and 27.

You are considering two columns with identical dimensions. One is constructed out of steel, the other...

You are considering two columns with identical dimensions. One is constructed out of steel, the other aluminium, which will buckle at a smaller load? The euler formula for critical buckling force for column, pin jointed at both ends is given by Pcr = pi^2 EI/ L^2 if the end of the column are constrained to prevent rotation, how will the buckling force change?

2. Locate and identify the following parts of the kidney: renal cortex medullary columns major calyces...

2. Locate and identify the following parts of the kidney: renal cortex medullary columns major calyces Ureter renal medulla medullary pyramids renal papillae minor calyces renal pelvis renal capsule 3. Briefly describe all identified structures in your lab report.

Let x ∈ R3 be nonzero and let A be the matrix whose columns are x,...

Let x ∈ R3 be nonzero and let A be the matrix whose columns are x, 2x, 3x in this order. Show that x is an eigenvector of A and find a basis for the null space of A.

If the slab is 21 ft wide x 36 ft long x 15 inches deep with...

If the slab is 21 ft wide x 36 ft long x 15 inches deep with the total steel reinforcement of 20,000 ft of #5 bar. Find the quantity of concrete required (in cubic yards). The capacity of concrete truck is 9 cubic yards. Assume waste factor as 10%. Density of steel is 490 lbs/cubic feet. (a) Calculate Slab Volume: (b)Calculate Steel Volume and Weight: (c) Calculate concrete Volume:

Problem 2 : If the slab is 25 ft wide x 50 ft long x 18...

Problem 2 : If the slab is 25 ft wide x 50 ft long x 18 inches deep with the total steel reinforcement of 15,000 ft of #5 bar. Find the quantity of concrete required (in cubic yards). The capacity of concrete truck is 9 cubic yards. Assume waste factor as 10%. Density of steel is 490 lbs/cubic feet. Problem 3 : If the slab is 75 ft wide x 100 ft long x 9 inches deep with the total...

1) If a block of wood has the dimensions of 50.0cm x 50.0cm x 45.0cm. What...

1) If a block of wood has the dimensions of 50.0cm x 50.0cm x 45.0cm. What is it's volume in Liters? (Give answer in correct significant digits) 2) If one kilogram is equal to 2.2 pounds: a. What is the mass of a 5.0 lb bag of sugar?

Q11.a. Calculate the cost of a foundation with length x width x thickness dimensions of 1000...

Q11.a. Calculate the cost of a foundation with length x width x thickness dimensions of 1000 x 1200 x 600 mm. Concrete of ratios 1:4:8 will be made and mixed at site with a mixer machine. Assume the following: [8.5] • The manpower service rate for casting the concrete OMR 13 / cubic meter. • The formwork rate is OMR 5 OMR / square meter. • The diesel consumption for the mixer machine is 3 liters / hour. • The...

1. Locate a root of sin(x)=x2 where x is in radians. Use a graphical technique and...

1. Locate a root of sin(x)=x2 where x is in radians. Use a graphical technique and bisection with the initial interval from 0.5 to 1. Perform the computation until ea is less than es=2%. Also perform an error check by substituting your final answer into the original equation. 2. Determine the positive real root of ln(x 2 )=0.7 using three iterations of the bisection method, with initial interval of [0.5:2]. 3. Determine the lowest positive root of f(x)=7sin(x)e -x -1...

Locate the centroid x¯of the parabolic area. Take a = 9 in , h = 17...

Locate the centroid x¯of the parabolic area. Take a = 9 in , h = 17 in .

Question