Q11.a. Calculate the cost of a foundation with length x width x thickness dimensions of 1000...

Q11.a. Calculate the cost of a foundation with length x width x thickness dimensions of 1000 x 1200 x 600 mm. Concrete of ratios 1:4:8 will be made and mixed at site with a mixer machine. Assume the following: [8.5]
• The manpower service rate for casting the concrete OMR 13 / cubic meter.
• The formwork rate is OMR 5 OMR / square meter.
• The diesel consumption for the mixer machine is 3 liters / hour.
• The diesel machine needs to work for 4 hours to mix concrete for one foundation.
• The average price of diesel is OMR 0.277 / liter.
• The share of the rent of the mixer machine is OMR 6.500 for one foundation.
• Steel is to be excluded from this calculation.
• Prices for the raw materials are as follows:
o Cement: OMR 1.700 / bag
o Sand: OMR 15 / cubic meter
o Aggregate: OMR 18 / cubic meter

Solutions

Expert Solution

Ally Wells answered 2 months ago

Next > < Previous

Related Solutions

a function named area to calculate the area of a rectangle area = Length x width...

a function named area to calculate the area of a rectangle area = Length x width 2.a function named volume to calculate the volume of a sphere volume = 4/3 x 3.14 x radius x radius x radius 3.a function named volume to calculate the volume of a cuboid volume = Length x width x ht 4. Use a loop structure to calculate the sum of all odd numbers from 1 to 17 5) Use a loop structure to calculate...

A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6...

A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6 m height (z-direction). With the head of a vector at the front, bottom, left-hand corner of the box , and the tail of the vector at the back, top, right-hand corner of the box (at the origin); give the vector in Cartesian form, magnitude/direction angles representation, and the unit vector.

The sample measurements for Aluminum, Copper and Nylon have the same length, width, and thickness. While...

The sample measurements for Aluminum, Copper and Nylon have the same length, width, and thickness. While the length is 76.5mm and the width is 19.5mm, the thickness of these samples are about 0.127 mm. How might these specimens behave differently if they were thick?

A rectangle has a length of 10 inches and a width of 6 inches. If the length is increased by x inches and the width increased

For the following exercises, use the written statements to construct a polynomial function that represents the required information.A rectangle has a length of 10 inches and a width of 6 inches. If the length is increased by x inches and the width increased by twice that amount, express the area of the rectangle as a function of x.

A Tank with a dimension of length (L) x width (B) x height (H) of 4m...

A Tank with a dimension of length (L) x width (B) x height (H) of 4m x 2m x 2m is filled with 1m depth of water and with oil to the fullest. Density of oil ρm= 801 kg/m3. The tank is open. 1.Calculate and draw pressure distribution on tank wall 2.Calculate force on the length and width side of tank wall, also on the bottom of the tank Given: ρwater= 1000 kg/m3 , g = 9,81 m/sec2

A 2024-T3 aluminum bar has rectangular cross section dimensions of 2" x 0.5". The length of...

A 2024-T3 aluminum bar has rectangular cross section dimensions of 2" x 0.5". The length of the column is 9.0 inches. A) Calculate the transition slenderness ratio (Sr)D for this column. [Answer should be 69.9] B) Calculate the slenderness ratio for your assigned column length. [Answer should be 62] C) Calculate the maximum unit load (Pcr/A) for the bar. Indicate whether the column is a Johnson or Euler column. [Numerical answer should be 25296 psi but I don't know Johnson...

The air-conditioned room which stands in a ventilated basement measuring length, width, height 6m x 3m...

The air-conditioned room which stands in a ventilated basement measuring length, width, height 6m x 3m x 3m. one of the two 3m walls faces west and has a double glass window measuring 1.5 m x 1.5 m, mounted on a wall without external shading. There is no heat gain through the wall other than the wall facing west. Calculate sensible heat, latent heat, and total heat in the room. How much cooling capacity is needed? Inside conditions: 25 Celsius...

Calculate cost of debt for the following: The bond with a face value of 1000 were...

Calculate cost of debt for the following: The bond with a face value of 1000 were trading at RM 940 with 5 years to maturity ( annual coupon payment of 5%). Buying the truck means that he would incurring a cost of RM 85,000 each year for the whole feet. The company tax rate is 30%. The cost of capital is same as cost of deb. Which one is wiser equity or debt?

Based on the table below calculate the cost for patient X using the ratio of cost...

Based on the table below calculate the cost for patient X using the ratio of cost to charge method Billed Calculated Department Charges Cost RCC Charges Cost Med/Surg $42,000,000 $14,000,000 ________ $14,000 ________ ICU $10,000,000 $4,000,000 ________ 0 ________ OR $15,000,000 $6,000,000 ________ $5,000 ________ Respiratory therapy $2,000,000 $1,000,000 ________ $500 ________ Rehab therapy $5,000,000 $2,000,000 ________ $2,000 ________ Clinical Lab $7,000,000 $2,000,000 ________ $2,000 ________ Radiology $8,000,000 $3,000,000 ________ $1,000 ________ Pharmacy $9,000,000 $3,000,000 ________ $1,500 ________ Cardiology $3,000,000...

For the following exercises, the cost of producing x cellphones is described by the function C(x) = x2 − 4x + 1000. Find the average rate of change in the total cost as x changes from x = 10 to x = 15.

For the following exercises, the cost of producing x cellphones is described by the function C(x) = x2 − 4x + 1000. Find the average rate of change in the total cost as x changes from x = 10 to x = 15.

Subjects