1) If a block of wood has the dimensions of 50.0cm x 50.0cm x 45.0cm. What...

1) If a block of wood has the dimensions of 50.0cm x 50.0cm x 45.0cm.

What is it's volume in Liters? (Give answer in correct significant digits)

2) If one kilogram is equal to 2.2 pounds:

a. What is the mass of a 5.0 lb bag of sugar?

Expert Solution

1. Volume of wood box = 50.0cm x 50.0cm x 45.0cm.

= 112500 cm³

1 cm³ = 1 mL = 10^-3 L

= 112500 * 10^-3 L

= 112.5 L

= 112 L to three significant figures

2. 1 kg = 2.2 lb

1 lb = 1/2.2 kg

5 lb = (1/2.2) * 5 kg

= 2.2727 kg

queen_honey_blossom answered 3 years ago

3. A block of wood has a mass of 3.67 kg and a density of 600...

3. A block of wood has a mass of 3.67 kg and a density of 600 kg/m3. It is to be loaded with lead so that it is still floating in water completely immersed. What mass of lead is needed (density of lead is 11,300 kg/m3)

A small block of wood with pwood = 440 kg/m3 and Vwood = 4.5 x 10-5...

A small block of wood with pwood = 440 kg/m3 and Vwood = 4.5 x 10-5 m3 is submerged in water (pH2O = 1000 kg/m3) to a depth of 1.5 m. The block is then released at rest and accelerates towards the surface. How high will it travel above the surface of the water? Ignore viscosity (friction) of water. Draw a FBD for full credit.

A block of wood of mass 10.8 kg and density 4.42 x 102 kg/m3, floats on...

A block of wood of mass 10.8 kg and density 4.42 x 102 kg/m3, floats on water. (a) What is the minimum amount of aluminum (density 2.70 x 103 kg/m3) that can be placed on top of the wood block and cause the block of wood and the aluminum to sink? (b) If instead it was a block of ice of mass 10.8 kg and density 8.90 x 102 kg/m3. What is the minimum amount of aluminum that can be...

A block of wood has a mass of 3.54 kg and a density of 588 kg/m3....

A block of wood has a mass of 3.54 kg and a density of 588 kg/m3. It is to be loaded with lead (1.13 × 104 kg/m3) so that it will float in water with 0.887 of its volume submerged. What mass of lead is needed if the lead is attached to (a) the top of the wood and (b) the bottom of the wood?

A 12.7 g bullet is fired into a block of wood at 245 m/s. The block...

A 12.7 g bullet is fired into a block of wood at 245 m/s. The block is attached to a spring constant of 205 N/m. The block and bullet continue to move, compressing the spring by 35.0 cm before the whole system momentarily comes to a stop. Assuming that the surface on which the block is resting is frictionless, determine the mass of the wooden block.

1.A bullet with a mass of 45 g is fired into a 8.3-kg block of wood...

1.A bullet with a mass of 45 g is fired into a 8.3-kg block of wood resting on a floor against a spring. This ideal spring (k = 76 N/m) has a maximum compression of 28 cm. What was the initial speed of the bullet? 2.Two common and identical carts are used to perform an experiment. Cart A is pushed toward the stationary cart B with a velocity of 2.6 m/s. After the collision, cart A bounces back with a...

A block of wood floats in water. 0.00040m^3 of the wood is under water. how much...

A block of wood floats in water. 0.00040m^3 of the wood is under water. how much does the block of wood weigh?

A 1.5 kg block of wood is launched up a wooden ramp that has a 40-degree...

A 1.5 kg block of wood is launched up a wooden ramp that has a 40-degree incline. The initial speed of the block is 12 m/s. The coefficient of static friction is 0.4 and the coefficient of kinetic friction is 0.20. Ignore air resistance. A) Draw the incline with the block at the bottom of the ramp and at the top of its slide. Label with a coordinate system. List all known quantities. B) Draw free body diagrams for the...

1. Draw a 3-D sketch of the pallet unit load on a wood pallet. Include dimensions...

1. Draw a 3-D sketch of the pallet unit load on a wood pallet. Include dimensions for a box and the pallet unit load. 2. Show your calculations for the quantity of boxes in a unit load. 3. Show your calculations for the number of pallets per trailer load. 4. Show your calculations for the quantity of boxes per trailer load. 5. Explain why these results are important to a producer who ships goods to customers by freightliner. Box dimension:...

A block of pine wood (p=.43 g/cm3) is floating on a pond. The block is 10...

A block of pine wood (p=.43 g/cm3) is floating on a pond. The block is 10 cm x 40 cm x 5 cm thick. a) How much of the block protrudes above the water? b) If the block is made to carry a load by placing additional mass on top of it, how much mass must be added to just submerge the block? Please show all work. Thank you for the help!!!

Question