Assume a lossless rectangular waveguide, with a = 2 cm and b = 1 cm. Assume...

Assume a lossless rectangular waveguide, with

a = 2 cm and b = 1 cm. Assume a free space within the waveguide.

1. Determine the cut off frequencies, in ascending orders of first

10 TE^z and TM^z Modes.

2. Draw field patterns ( E and H fields ) for the first 3 Modes over

the xy-plane of rectangular waveguide. ( Show your work. )

Expert Solution

genius_generous answered 2 years ago

In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, ? =...

In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, ? = 0, ? = ?o and ? = 4?o Hx = 2 sin (?x/a) cos (3?y/b) sin (? x 1011t – ?z) A/m. Assume TE13, determine other field components for this mode.

1. find (a)electric field and (b)magnetic field of TE waves in a rectangular waveguide. 2. find...

1. find (a)electric field and (b)magnetic field of TE waves in a rectangular waveguide. 2. find (a)electric field and (b)magnetic field of coaxial transmission line.

The parallel-plate waveguide is air-filled and a = 2 cm. Plot the frequency as a function...

The parallel-plate waveguide is air-filled and a = 2 cm. Plot the frequency as a function of the longitudinal propagation constant for TM2, numerically find and then plot the phase velocity and the group velocity as a function of the longitudinal propagation constant. Use a range of the longitudinal propagation constant from 0 to 1000 [m-1]. In all graphs indicate the light lines. I will give thumbs up! please include detailed plots

determine the resonant of the dominant cavity mode for an air-filled rectangular waveguide

Find the expressions for the electric surface current density on the wall of a rectangular waveguide...

Find the expressions for the electric surface current density on the wall of a rectangular waveguide for a TE10 mode.

For the TE10 and TE11 modes of a rectangular waveguide, derive expressions for the surface current...

For the TE10 and TE11 modes of a rectangular waveguide, derive expressions for the surface current density and the surface charge density.

Consider the resonant cavity produced by closing off the two ends of a rectangular waveguide, at...

Consider the resonant cavity produced by closing off the two ends of a rectangular waveguide, at z=0 and at z=d, making a perfectly conducting empty box. Find the electric and magnetic fields for TE and TM modes.

A 500 cm 2 of paper will be used to make a rectangular poster. The poster...

A 500 cm 2 of paper will be used to make a rectangular poster. The poster has 4 cm margins on the sides and bottom. The top margin is 6 cm. The rest of the poster will be the portion that is printed on. What dimensions should the piece of paper have to provide the largest printed area?

A rectangular waveguide of width w and height h has cut-off frequencies for TE10 and TE11...

A rectangular waveguide of width w and height h has cut-off frequencies for TE10 and TE11 modes in the ratio 1 : 2. The aspect ratio ?

(a) Describe what the Hall Effect consists of, (b) A rectangular copper strip 1.5 cm wide...

(a) Describe what the Hall Effect consists of, (b) A rectangular copper strip 1.5 cm wide and 0.10 cm thick. carries a current of 5.0 A. Find the Hall voltage for a 1.2-T magnetic field applied in a direction perpendicular to the strip. I will like if correct

Question