In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, ? =...

In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, ? = 0, ? = ?_o and ? = 4?_o H_x = 2 sin (?x/a) cos (3?y/b) sin (? x 10¹¹t – ?z) A/m. Assume TE₁₃, determine other field components for this mode.

Expert Solution

Manojponduru answered 2 years ago

Assume a lossless rectangular waveguide, with a = 2 cm and b = 1 cm. Assume...

Assume a lossless rectangular waveguide, with a = 2 cm and b = 1 cm. Assume a free space within the waveguide. 1. Determine the cut off frequencies, in ascending orders of first 10 TEz and TMz Modes. 2. Draw field patterns ( E and H fields ) for the first 3 Modes over the xy-plane of rectangular waveguide. ( Show your work. )

(a) Describe what the Hall Effect consists of, (b) A rectangular copper strip 1.5 cm wide...

(a) Describe what the Hall Effect consists of, (b) A rectangular copper strip 1.5 cm wide and 0.10 cm thick. carries a current of 5.0 A. Find the Hall voltage for a 1.2-T magnetic field applied in a direction perpendicular to the strip. I will like if correct

1. find (a)electric field and (b)magnetic field of TE waves in a rectangular waveguide. 2. find...

1. find (a)electric field and (b)magnetic field of TE waves in a rectangular waveguide. 2. find (a)electric field and (b)magnetic field of coaxial transmission line.

determine the resonant of the dominant cavity mode for an air-filled rectangular waveguide

Find the expressions for the electric surface current density on the wall of a rectangular waveguide...

Find the expressions for the electric surface current density on the wall of a rectangular waveguide for a TE10 mode.

For the TE10 and TE11 modes of a rectangular waveguide, derive expressions for the surface current...

For the TE10 and TE11 modes of a rectangular waveguide, derive expressions for the surface current density and the surface charge density.

Consider the resonant cavity produced by closing off the two ends of a rectangular waveguide, at...

Consider the resonant cavity produced by closing off the two ends of a rectangular waveguide, at z=0 and at z=d, making a perfectly conducting empty box. Find the electric and magnetic fields for TE and TM modes.

Water at a local bulk temperature of 24°C flows at 0.8 m/s through a smooth, 1.5-cm-ID...

Water at a local bulk temperature of 24°C flows at 0.8 m/s through a smooth, 1.5-cm-ID tube that is kept at 30°C and the flow is fully developed. a) The system is extremely clean and quiet; therefore, the flow stays laminar regardless of the magnitude of ReD, until a noisy air compressor is turned on in the laboratory. Then the flow suddenly goes turbulent. Calculate the ratio of turbulent to laminar heat transfer coefficients. Use the Gnielinski correlation for turbulent...

A rectangular waveguide of width w and height h has cut-off frequencies for TE10 and TE11...

A rectangular waveguide of width w and height h has cut-off frequencies for TE10 and TE11 modes in the ratio 1 : 2. The aspect ratio ?

The parallel-plate waveguide is air-filled and a = 2 cm. Plot the frequency as a function...

The parallel-plate waveguide is air-filled and a = 2 cm. Plot the frequency as a function of the longitudinal propagation constant for TM2, numerically find and then plot the phase velocity and the group velocity as a function of the longitudinal propagation constant. Use a range of the longitudinal propagation constant from 0 to 1000 [m-1]. In all graphs indicate the light lines. I will give thumbs up! please include detailed plots

Question