A 500 cm 2 of paper will be used to make a rectangular poster. The poster...

A 500 cm 2 of paper will be used to make a rectangular poster. The poster has 4 cm margins on
the sides and bottom. The top margin is 6 cm. The rest of the poster will be the portion that is printed on.
What dimensions should the piece of paper have to provide the largest printed area?

Expert Solution

milcah answered 2 years ago

You are designing a rectangular poster to contain 50 in^2 of printing with a 4 in...

You are designing a rectangular poster to contain 50 in^2 of printing with a 4 in margin at the top and bottom and a 2 in margin at each side. What overall dimensions will minimize the amount of paper used?

Assume a lossless rectangular waveguide, with a = 2 cm and b = 1 cm. Assume...

Assume a lossless rectangular waveguide, with a = 2 cm and b = 1 cm. Assume a free space within the waveguide. 1. Determine the cut off frequencies, in ascending orders of first 10 TEz and TMz Modes. 2. Draw field patterns ( E and H fields ) for the first 3 Modes over the xy-plane of rectangular waveguide. ( Show your work. )

In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, ? =...

In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, ? = 0, ? = ?o and ? = 4?o Hx = 2 sin (?x/a) cos (3?y/b) sin (? x 1011t – ?z) A/m. Assume TE13, determine other field components for this mode.

A solid, rectangular iron bar measures 0.30 cm by 3.0 cm by 25 cm . Part...

A solid, rectangular iron bar measures 0.30 cm by 3.0 cm by 25 cm . Part A Find the resistance between opposing faces with crosssectional area 0.30 cm × 3.0 cm , assuming the faces in question are equipotentials. Express your answer using two significant figures. R = ? Ω Part B Find the resistance between opposing faces with crosssectional area 0.30 cm × 25 cm , assuming the faces in question are equipotentials. R = ? Ω Part C...

A rectangular block of copper has sides of length 12 cm, 26 cm, and 37 cm....

A rectangular block of copper has sides of length 12 cm, 26 cm, and 37 cm. If the block is connected to a 5.4 V source across two of its opposite faces, find the following. (a) What is the maximum current the block can carry? (b) What is the minimum current the block can carry?

5) A rectangular coil of wire, 22.0 cm by 35.0 cm and carrying a current of...

5) A rectangular coil of wire, 22.0 cm by 35.0 cm and carrying a current of 1.40 A, is oriented with the plane of its loop perpendicular to a uniform 1.50-T magnetic field, as shown in the figure. a) Calculate the net force which the magnetic field exerts on the coil b) Calculate the torque which the magnetic field exerts on the coil c) The coil is rotated through a 30.0degrees angle about the axis shown, the left side coming...

A rectangular loop of wire with sides H = 27 cm and W = 74 cm...

A rectangular loop of wire with sides H = 27 cm and W = 74 cm carries current I2 = 0.187 A. An infinite straight wire, located a distance L = 25 cm from segment ad of the loop as shown, carries current I1 = 0.781 A in the positive y-direction. 1) What is Fad,x, the x-component of the force exerted by the infinite wire on segment ad of the loop? N You currently have 0 submissions for this question....

The plane of a rectangular loop of wire with a width of 5.0 cm and a...

The plane of a rectangular loop of wire with a width of 5.0 cm and a height of 8.0 cm is parallel to a magnetic field of magnitude 0.22 T . The loop carries a current of 6.7 A . What torque acts on the loop? What is the magnetic moment of the loop? What is the maximum torque that can be obtained with the same total length of wire carrying the same current in this magnetic field?

Design an isolated rectangular footing to support an interior column 40 cm × 40 cm in...

Design an isolated rectangular footing to support an interior column 40 cm × 40 cm in cross section and carries a dead load of 800 kN and a live load of 600 kN. Use f́c= 21 MPa, fy= 420 MPa, q all (net) =200 kN / m2 , γsoil = 17 kN /m3 , and Df =1.25 m. Space limitations are such that one lateral dimension cannot exceed 2.5 m

A closely wound rectangular coil of 80 turns has dimensions 25.0 cm by 40.0 cm.

A closely wound rectangular coil of 80 turns has dimensions 25.0 cm by 40.0 cm. The plane of the coil is rotated from a position in which it makes an angle of 37.0 degrees with a magnetic field of 1.10 T to a position perpendicular to the field. The rotation takes 0.0600 s. What is the average emf ε induced in the coil? What is the magnitude of the average emf E induced as the coil is rotated?E= ________ V

Question