12. At a frequency of 80 MHz, a lossless transmission line has a characteristic impedance of...

12. At a frequency of 80 MHz, a lossless transmission line has a characteristic impedance of 300Ω and a wavelength of 2.5m. (a) Find L; (b) Find C. (c) If the line is terminated with the parallel combination of 200Ω and 5 pF, determine Γ and SWR.

Solutions

Expert Solution

Manojponduru answered 5 months ago

Next > < Previous

Related Solutions

Derive aformula for the input impedance of a terminated lossless transmission line.

Assuming that the length of a lossless transmission line with the normalized load impedance of zL...

Assuming that the length of a lossless transmission line with the normalized load impedance of zL = ZL/Z0 = 1 + j1 is l = 2.25λz , there are a total of (A) 2 voltage maxima and 2 voltage minima (B) 2 voltage maxima and 3 voltage minima (C) 3 voltage maxima and 2 voltage minima (D) 4 voltage maxima and 4 voltage minima (E) 4 voltage maxima and 5 voltage minima (F) 5 voltage maxima and 4 voltage minima...

A lossless transmission line of length l=0.4? is terminated with a complex load impedance Z_L=60+j50 ?...

A lossless transmission line of length l=0.4? is terminated with a complex load impedance Z_L=60+j50 ? and characteristic impedance (Z_0=50 ?). Use Smith Chart to find: The VSWR on the line; The reflection coefficient at the load and its phase angle; The load admittance of the line Y_L in S; The input impedance of the line in ?; The distance to the first voltage minimum from the load in ?; and The distance to the first voltage maximum from the...

An input transmission line of characteristic impedance Z01 splits off into three identical output transmission lines...

An input transmission line of characteristic impedance Z01 splits off into three identical output transmission lines having characteristic impedance Z02 = 3Z01. This represents a four-port system. Find all 16 of the S parameters for this system. Note: Many of the 16 Sij parameters will be identical. There should be only four values that are distinct. SHOW WORK!!

A lossless 50-Ω transmission line is terminated in a load with Z L = (35 −...

A lossless 50-Ω transmission line is terminated in a load with Z L = (35 − j47.5) Ω using a short circuited stub. Use the Smith chart to determine position and length line for the stub? show step by step by hand and draw by hand I want details so I can understand

A lossless 50-Ω transmission line is terminated in a load with Z L = (35 −...

Explain why the positive sequence impedance of a transmission line and transformer is the same as...

Explain why the positive sequence impedance of a transmission line and transformer is the same as the negative sequence impedance but is different from the zero sequence impedance.

A 3-phase 60 HZ , 200km transmission line has a series impedance of z= 0.10 +...

A 3-phase 60 HZ , 200km transmission line has a series impedance of z= 0.10 + j0.35 Ω/km and a capacitive reactance of 0.2 x 10 6 Ω-km. At the receiving end, the line delivers 250 MW @230/30θ kV and 0.95 lagging power factor. Determine a) The line impedance and shunt admittance b) The A, B, C , D parameters c) Sending end complex power and power factor d) Is the PF is leading or lagging e) Voltage regulation for...

A 60-Hz, 230-km, three phase overhead transmission line has a series impedance z = 0.85<78.04 ̊...

A 60-Hz, 230-km, three phase overhead transmission line has a series impedance z = 0.85<78.04 ̊ /km and a shunt admittance y = 5.105 x 10-6 < 90 ̊ S/km. The load at the receiving end is 135 MW at unity power factor and 215 kV. Determine the voltage, current, real and reactive power at the sending end and the percent voltage regulation of the line.

The impedance of a three-phase, 50 km long power transmission line per unit length is 0.05...

The impedance of a three-phase, 50 km long power transmission line per unit length is 0.05 + j0.1  / km. A load with a power coefficient of 0.8 forward is fed from the end of the line. Line and end of line of energy transmission line According to the intention to keep the voltage between phases constant at 154 kV; a) Active and reactive power values drawn from the beginning and end of the line, b) Calculate the lost...

Subjects