ENVIRONMENTAL ENGINEERING - When Cl2 gas is added to water for disinfection, it hydrolyzes with water...

ENVIRONMENTAL ENGINEERING - When Cl2 gas is added to water for disinfection, it hydrolyzes with water to form HOCl. The combined concentrations of HOCl and OCl- is called “free chlorine” and the pKa for HOCl is 7.5. What percentage of the total disinfection power (measured as CT OCl- ) exists in the acid form at pH = 6? At pH = 7? Which form is a stronger disinfectant?

Expert Solution

queen_honey_blossom answered 2 years ago

When Chlorine gas is used to disinfect drinking water, it hydrolyzes with the water to form...

When Chlorine gas is used to disinfect drinking water, it hydrolyzes with the water to form hypochlorous acid (HOCl, pKa = 7.54), which is a powerful disinfectant. However, when the acid dissociates to its conjugate base, it becomes a less effective disinfectant. The disinfection power of the acid is 88 times better than its conjugate base, OCl-, on a per-mole basis. Calculate the mass of hypochlorous acid you would need to add to 1 liter of water at pH =...

Define disinfection process, write the equations for the dissolution (hydrolysis) of chlorine gas in water and...

Define disinfection process, write the equations for the dissolution (hydrolysis) of chlorine gas in water and the subsequent dissociation (ionization) of hypochlorous acid. Draw breakpoint chlorine dosage curve, and provide explanation to each zone

During disinfection at large water treatment plants, operators add chlorine gas to water to make hypochlorous...

During disinfection at large water treatment plants, operators add chlorine gas to water to make hypochlorous acid (HOCl is weak acid with pKa = 7.54). In backyard swimming pools, homeowners accomplish disinfection by adding sodium hypochlorite (NaOCl). Predict the qualitative change in pH (up or down) due to (a) adding HOCl to water and (b) adding NaOCl to water. Explain your reasoning based on LeChatelier’s Principle.

When chlorine is used for disinfection of drinking water, chloroform can be produced by the reaction...

When chlorine is used for disinfection of drinking water, chloroform can be produced by the reaction of chlorine with residual organics in the water. For chloroform, RfDoral = 0.01 mg/kg/d and SForal = 0.0061 1/(mg/kg/d). Estimate the ingestion intake rate for non-carcinogenic and carcinogenic effects on an adult resident of a home receiving tap water with an average chloroform concentration of 65 mg/L. Calculate the potential non-carcinogenic and carcinogenic health risks associated with this ingestion rate. Are the risks presented...

Environmental Engineering Water Treatment Wastewater Treatment Waste Water Treatment. A river is used as water resource...

Environmental Engineering Water Treatment Wastewater Treatment Waste Water Treatment. A river is used as water resource for a town. During monitoring, high level of NH3 is detected. A) What are the reasons for this pollution? B) Is it logical to continue feeding the water treatment system? C) Can NH3 be removed by regular units in a typical water treatment plant? In summary, how do you solve this problem, explain your reasons.

Why turbidity control is important for water disinfection?

For Environmental Engineering: (i) List at least five water quality characteristics (ii) Compare surface water and...

For Environmental Engineering: (i) List at least five water quality characteristics (ii) Compare surface water and groundwater in terms of their typical water quality characteristics (iii) Draw annotated diagrams for a typical surface water treatment plant and a typical groundwater treatment plant.

Environmental Engineering Water Treatment. Question 1: Aeration is particularly utilized to supply oxygen in water treatment....

Environmental Engineering Water Treatment. Question 1: Aeration is particularly utilized to supply oxygen in water treatment. a) How much oxygen is required for drinking water? b) How do the impurities (pollutants or other ions) in water affect aeration efficiency? Question 2: A) How do you classify the settling types? Explain briefly. B) Explain use of sedimentation units in water treatment (i.e. before or after which processes is sedimentation required).

a) what ions when added to water, do not change the ph of water? write an...

a) what ions when added to water, do not change the ph of water? write an example equilibrium rxn b) what ions when added to water, create an acidic solution? write an example equilibrium rxn c) what ions when added to water create a basic solution? write an example quibrilum rxn

What happened when the cola and borax solution was each added to the water? Is water...

What happened when the cola and borax solution was each added to the water? Is water a good buffering system? Why or why not, chemically speaking?

Question