Question

In: Physics

Steam is generated in the boiler of a cogeneration plant at 4 MPa and 480 °C...

Steam is generated in the boiler of a cogeneration plant at 4 MPa and 480 °C with a rate of 6 kg/s . The plant is to produce power while meeting the process steam requirements for a certain industrial application. One-third of the steam leaving the boiler is throttled to a pressure of 820 kPa then routed to the process heater. The rest of the steam is expanded in an isentropic turbine to a pressure of 820 kPa and is also routed to the process heater. Steam leaves the process heater as saturated liquid.

Determine the net power produced?

Determine the rate of process heat supply?

What-if scenario: What would the net power produced be if one-half instead of one-third of the steam leaving the boiler was throttled?

Solutions

Expert Solution

genius_generous answered 2 years ago
Next > < Previous

Related Solutions

Superheated steam at 8 MPa and 480°C leaves the steam generator of a vapor power plant....
Superheated steam at 8 MPa and 480°C leaves the steam generator of a vapor power plant. Heat transfer and frictional effects in the line connecting the steam generator and the turbine reduce the pressure and temperature at the turbine inlet to 7.7 MPa and 440°C, respectively. The pressure at the exit of the turbine is 10 kPa, and the turbine operates adiabatically. Liquid leaves the condenser at 8 kPa, 36°C. The pressure is increased to 8.6 MPa across the pump....
Superheated steam at 8 MPa and 480°C leaves the steam generator of a vapor power plant....
Superheated steam at 8 MPa and 480°C leaves the steam generator of a vapor power plant. Heat transfer and frictional effects in the line connecting the steam generator and the turbine reduce the pressure and temperature at the turbine inlet to 7.3 MPa and 440°C, respectively. The pressure at the exit of the turbine is 10 kPa, and the turbine operates adiabatically. Liquid leaves the condenser at 8 kPa, 36°C. The pressure is increased to 8.6 MPa across the pump....
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa....
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa. The Turbine has an isentropic efficiency of 85% and exhausts at 15 kPa. In the condenser, the water is subcooled to 38°C by lake water at 13°C. The pump isentropic efficiency is 75% Draw and label the T-s diagram (4 points) for this cycle and determine: 1. The cycle’s thermal efficiency (7 points) 2. The mass flow rate of the steam in the boiler...
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa....
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa. The Turbine has an isentropic efficiency of 85% and exhausts at 15 kPa. In the condenser, the water is subcooled to 38°C by lake water at 13°C. The pump isentropic efficiency is 75%. 1. Draw and label the T-s diagram for this cycle 2. Determine the cycle’s thermal efficiency 3. Determine the mass flow rate of the steam in the boiler (kg/h) 4. Determine...
Superheated steam at 20 MPa, 640°C enters the turbine of a vapor power plant. The pressure...
Superheated steam at 20 MPa, 640°C enters the turbine of a vapor power plant. The pressure at the exit of the turbine is 0.5 bar, and liquid leaves the condenser at 0.4 bar at 75°C. The pressure is increased to 20.1 MPa across the pump. The turbine and pump have isentropic efficiencies of 81 and 85%, respectively. Cooling water enters the condenser at 20°C with a mass flow rate of 70.7 kg/s and exits the condenser at 38°C. For the...
A steam power plant with boiler use coal fuel with net heat 4000 kcal/kg and boiler...
A steam power plant with boiler use coal fuel with net heat 4000 kcal/kg and boiler efficiency 90%. If steam utrbine from the power plsnt generate power output 100 MW, at condition vapor enter at 10 MPa, 520oC and condensate to saturated liquid at 0.08 bar. If the isentropic efficiency turbine and pump is 90%, then a) Calculate coal required (ton/hour) b) Calculate netto efficiency of the power plant c) Calculate Net Plant Heat Rate (kCal/kWh)
A steam power plant operates with a boiler that is heated from a heat source at...
A steam power plant operates with a boiler that is heated from a heat source at 457 °C and produces 450 ton/hr. of steam. The steam leaves the boiler at 425 °C and 4 MPa. The steam reaches a turbine at 375 °C and 3 MPa and leaves it at 50 kPa with 4% liquid water. This mixture is flown into a condenser that rejects the heat into a river at 17 °C. Water leaves the condenser at 50 kPa...
Steam at 4 MPa and 350°C is expanded in an adiabatic turbine to 120 kPa. What...
Steam at 4 MPa and 350°C is expanded in an adiabatic turbine to 120 kPa. What is the isentropic efficiency of this turbine if the steam is exhausted as a saturated vapor?
Rankine cycle operates on boiler pressure 15 MPa and condenser pressure of 30 kPa. Superheated steam...
Rankine cycle operates on boiler pressure 15 MPa and condenser pressure of 30 kPa. Superheated steam enters the high-pressure turbine at 450°C. The high-pressure turbine expands the steam and enters the re-heater at 2.5 MPa. The steam is reheated until temperature reaches 450°C before being expanded in low-pressure turbine to condenser pressure of 30 kPa. Assume the isentropic efficiency of the low-pressure and high-pressure turbines are 94% and 89% respectively, and pump is working isentropically. Neglect the change in kinetic...
A steam turbine operates with steam at inlet conditions of 3.5 MPa and 3500 C. The...
A steam turbine operates with steam at inlet conditions of 3.5 MPa and 3500 C. The exit stream leave the turbine is at 0.8 MPa and is known to contain a mixture of saturated vapor and liquid. The steam rate through the turbine is 1000 kg/h. A (negligible) fraction of exit stream is bled through a throttle valve to 0.10 MPa and is found to be 1250 C. The measured output of the turbine is 100 kW. a) Determine the...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT