Question

In: Civil Engineering

A 3.0% grade passing at station 19+85.00 at an elevation of 99.10 m meets a -2.0%...

A 3.0% grade passing at station 19+85.00 at an elevation of 99.10 m meets a -2.0% grade passing at station 20+35.00 at an elevation of 99.60 m. Please note that these two elevations and stations DO NOT correspond to BVC and EVC.

Determine the station and elevation of the point of intersection of the two grades./

If the highest point on the curve must lie at station 20+40.00, find the elevation of this point and the
length of the curve that meets these conditions./

Calculate the station and elevation of the beginning of the vertical curve (BVC), and its end (EVC).

Layout this curve at 100 m stations.

Solutions

Expert Solution


Related Solutions

A 0% grade meets a 3% grade at station 24+00.00 and an elevation of 372.15 ft....
A 0% grade meets a 3% grade at station 24+00.00 and an elevation of 372.15 ft. For a passing sight distance of 2,000 ft, find the following: a. Minimum length of the vertical curve that allows for passing using the minimum curve length equations. b. Calculate the elevation of the middle point of the curve. c. Calculate the elevation of the road at station 23+00.00.
Curve 2: A +7.00% grade meets a -6.00% grade at station 4+80 and elevation 705.70 ft,...
Curve 2: A +7.00% grade meets a -6.00% grade at station 4+80 and elevation 705.70 ft, 80-ft curve, staked 10ft apart. Get a rough estimate in cubic yards of how much soil that must be brought in (fill) and/or removed (cut) to create a 14-foot wide roadway that starts at your PVC/BVC, ends at your PVT/EVC, and follows your curve elevations. Make sure to state which curve your group was assigned in the calculations. Trapezoidal Area Estimation is key. ground...
A −2.60% grade meets a +1.95% grade at station 44+25 and elevation 3386.96 ft, 315-ft curve,...
A −2.60% grade meets a +1.95% grade at station 44+25 and elevation 3386.96 ft, 315-ft curve, stakeout at half stations. Part A Tabulate station elevations for an equal-tangent parabolic curve for the data given above. Express your answers, separated by commas, to six significant figures from lowest to highest elevation. ftft, ftft, ftft, ftft, ftft, ftft, ftft, ftft, ftft, ftft SubmitRequest Answer Provide Feedback
A −2.60% grade meets a +1.70% grade at station 44+25 and elevation 3386.96 ftft, 305-ftft curve,...
A −2.60% grade meets a +1.70% grade at station 44+25 and elevation 3386.96 ftft, 305-ftft curve, stakeout at half stations. Tabulate station elevations for an equal-tangent parabolic curve for the data given above. Express your answers, separated by commas, to six significant figures from lowest to highest elevation.
A −2.60%−2.60% grade meets a +1.60%+1.60% grade at station 44+25 and elevation 3386.96 ftft, 305-ftft curve,...
A −2.60%−2.60% grade meets a +1.60%+1.60% grade at station 44+25 and elevation 3386.96 ftft, 305-ftft curve, stakeout at half stations.answer should be 10 elevations
A negative 5% grade meets a positive 3% grade at vertex elevation 146.24m directly under an...
A negative 5% grade meets a positive 3% grade at vertex elevation 146.24m directly under an overpass bridge whose underside is at elevation 152.74 and carries another road across the grades at right angles.What is the longest parabolic curve that can be used to connect the two grades and at the same time provide at least 5 meter clearance under the bridge at its center line? If the underside of the bridge is level and is 12 meter wide, Find...
A grade g1=+2.00% intersects grade g2=−1.40% at a vertex whose station and elevation are 78+60 and...
A grade g1=+2.00% intersects grade g2=−1.40% at a vertex whose station and elevation are 78+60 and 7855.35 ft, respectively. An equal-tangent parabolic curve 505 ft long has been selected to join the two tangents. Compute station elevations for the curve, for stakeout at full stations.
Given P=+3.0%, q=-2% station of PI= 4+350 and elevation of PI=190.500m if L=250m,determine the station and...
Given P=+3.0%, q=-2% station of PI= 4+350 and elevation of PI=190.500m if L=250m,determine the station and elevation of the PC and PT Calculate the elevation at every 20m station and locate the station and elevation of the highest point of the curve , plot the profile of the curve
A tangent section of highway has a -1.0% grade and ends at station 0+145 and elevation...
A tangent section of highway has a -1.0% grade and ends at station 0+145 and elevation 26 m. It must be connected to another section of highway that has a -1.0% grade and that begins at station 1 + 350 and elevation 40 m. The connecting alignment should consist of a sag curve, constant grade section, and crest curve, and be designed for a speed of 80 km/h. What is the lowest grade possible for the constant grade section that...
A rectangular footing 2.0 m by 3.0 m is built in a homogeneous bed of sand...
A rectangular footing 2.0 m by 3.0 m is built in a homogeneous bed of sand of having bulk unit weight 20 kN/m3 and saturated unit weight 21 kN/m3 with an angle of shearing resistance of (30+Y)o. The depth of the base of footing is 1.8 m below the ground surface and water table is located at a depth of 1.0m below the base of the foundation. Consider the factor of safety of 3. Use Terzaghi’s Analysis Justify the adequacy...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT