Question

In: Civil Engineering

Water flows through a three-soil system placed in a 10 cm-wide square tube. Soil layers are...

Water flows through a three-soil system placed in a 10 cm-wide square tube. Soil layers are described as follows:

Soil

Thickness (cm)

K (cm/sec)

A

2

0.1

B

1

0.002

C

7

0.0006

Calculated the discharge (q) through each soil and through the system when water flows:
1- Parallel to layering (take head difference = 80 cm and length of all layers = 200 cm). 2- Perpendicular to layering (take head difference = 9 cm)

- In case 2, what would be the head at the middle of Soil “C”?

Solutions

Expert Solution


Related Solutions

Steam in a heating system flows through tube whose outer diameter is 10 cm and whose...
Steam in a heating system flows through tube whose outer diameter is 10 cm and whose walls are maintained at a temperature of 150°C. Circular aluminum alloy 2024-T6 fins (k = 186 W/m · °C) of outer diameter 15 cm and constant thickness 2 mm are attached to the tube. Heat is transferred to the surrounding air at T∞ = 25°C, with a heat transfer coefficient of 50 W/m2 C . If the total tube length is 5 m and...
Water flows at 20 cm^3/sec through a long straight tube that has an inner diameter of...
Water flows at 20 cm^3/sec through a long straight tube that has an inner diameter of 1 cm. As the water flows, a toxin leaches from the tube into the water. At the inner surface of the tube, the toxin attains its saturation concentration, Csat = 2 mM. Fortunately, upon entering the water the toxin also irreversibly degrades into a non-toxic compound; this degradation follows first-order kinetics. Toxin Diffusivity D = 10^-5 cm^2/sec Toxin mass transfer coefficient k = 1.38...
Through a double tube exchanger hot water circulates through the inner tube and water fry through...
Through a double tube exchanger hot water circulates through the inner tube and water fry through the outer tube. For countercurrent arrangement the following data is displayed: Cold water inlet temperature Tca 24.5 ° C Cold water outlet temperature Tcb 48.0 ° C Hot water inlet temperature Tha 86 ° C Hot water outlet temperature Thb 55 ° C Cold water flow 2.00 gal / min Calliente water flow 2.00 gal / min Transfer area 0.65 m2 Length of the...
The water flows through a horizontal tube the first part has an area of 50cm^2 and...
The water flows through a horizontal tube the first part has an area of 50cm^2 and the second part of the tube is 10cm^2, the water velocity is 1.2m/s in the smallest part is the pressure is 2.30x10^5 Pa. Calculate 1. The flow of water mass in the smallest part 2. The velocity in the biggest part 3. The water pressure in the biggest part
A 7.7 cm diameter horizontal pipe gradually narrows to 6.0 cm . When water flows through...
A 7.7 cm diameter horizontal pipe gradually narrows to 6.0 cm . When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 34.0 kPa and 22.8 kPa , respectively. What is the volume rate of flow?
A 5.1 cm diameter horizontal pipe gradually narrows to 2.5 cm . When water flows through...
A 5.1 cm diameter horizontal pipe gradually narrows to 2.5 cm . When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 35.0 kPa and 21.8 kPa , respectively. What is the volume rate of flow?
Water flows through a circular pipe with a constant radius of 5.0 cm. The speed and...
Water flows through a circular pipe with a constant radius of 5.0 cm. The speed and pressure at point A is 2.0 m/s and 2.0 x10^5 Pa respectively. What is the pressure at point B, which is 1.0 m higher than at point A.
A 8.0-cm-diameter horizontal pipe gradually narrows to 5.0 cm . When water flows through this pipe...
A 8.0-cm-diameter horizontal pipe gradually narrows to 5.0 cm . When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 31.0 kPa and 25.0 kPa , respectively. What is the volume rate of flow?
A tube is placed vertically in a beaker of salt water with a specific gravity of...
A tube is placed vertically in a beaker of salt water with a specific gravity of 1.15. The interfacial tension between the air and the water is 32 mN/m and the contact angle is 30 degrees, calculate: a) Capillary pressure in psi if the tube diameter is 0.0001 cm. b) Capillary rise of water in tube. c) If the cap rock thickness is 2ft, do you think this will stop water migration? d) Radius in inches of the largest pore,...
A transformer that is 10 cm long, 6.2 cm wide, and 5 cm high is to...
A transformer that is 10 cm long, 6.2 cm wide, and 5 cm high is to be cooled by attaching a 10 cm x 6.2 cm wide gold heat sink to its top surface. The heat sink has seven fins, which are 5 mm high, 2 mm thick, and 10 cm long. A fan blows air at 25°C with a velocity of 6 m/s parallel to the passages between the fins. The heat sink is to dissipate 12 W of...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT