(Is a 14 or 4.88 ? ) A dual wheel having a load per tire of...

(Is a 14 or 4.88 ? ) A dual wheel having a load per tire of 9,000 lb, 120 psi pressure, and a 14-inch center to center wheel spacing is placed on an infinite space layer with a modulus of elasticity of 20,000 psi. Calculate the pavement displacement at a depth of 15 inches at the following radial distances from the centerline of one tire between the two tires: r = 0, 3, 6, 9, and 12 inches. Assume Poisson Ratio 0.5

Expert Solution

Ally Wells answered 1 year ago

A demonstration gyroscope wheel is constructed by removing the tire from a bicycle wheel 0.640 mm...

A demonstration gyroscope wheel is constructed by removing the tire from a bicycle wheel 0.640 mm in diameter, wrapping lead wire around the rim, and taping it in place. The shaft projects 0.210 mm at each side of the wheel, and a woman holds the ends of the shaft in her hands. The mass of the system is 9.50 kgkg ; its entire mass may be assumed to be located at its rim. The shaft is horizontal, and the wheel...

A demonstration gyroscope wheel is constructed by removing the tire from a bicycle wheel 0.655 m...

A demonstration gyroscope wheel is constructed by removing the tire from a bicycle wheel 0.655 m in diameter, wrapping lead wire around the rim, and taping it in place. The shaft projects 0.190 m at each side of the wheel, and a woman holds the ends of the shaft in her hands. The mass of the system is 9.50 kg ; its entire mass may be assumed to be located at its rim. The shaft is horizontal, and the wheel...

Explain the efffect of load on max Fy, and the effect on tire behavior. if the...

Explain the efffect of load on max Fy, and the effect on tire behavior. if the normal load is doubled, will that double the max lateral force?

A steel bicycle wheel (without the rubber tire) is rotating freely with an angular speed of...

A steel bicycle wheel (without the rubber tire) is rotating freely with an angular speed of 14.5 rad/s. The temperature of the wheel changes from -142 to 244 °C. No net external torque acts on the wheel, and the mass of the spokes is negligible. What is the angular speed of the wheel at the higher temperature?

Do you think having a dual court system is expensive, cumbersome and very confusing? Will having...

Do you think having a dual court system is expensive, cumbersome and very confusing? Will having a single court system benefit our country and make the court system more streamlined and less confusing? Support your argument with good and logical reasons.

A shovel with a 3.75-cy wheel loader will be used to load trucks from a quarry...

A shovel with a 3.75-cy wheel loader will be used to load trucks from a quarry stockpile of processed aggregates having a maximum size of 3/8 inch. The haul distance will be negligible. The aggregate has a loose unit weight of 2950 lb/cy. Estimate the loader production in tons based on a 50-min hour efficiency factor. Use an aggressive cycle time and fill factor.

A 4-cy wheel loader will be used to load trucks from a quarry stockpile of uniform...

A 4-cy wheel loader will be used to load trucks from a quarry stockpile of uniform aggregates (1" and over in size). The haul distance will be negligible. The aggregate has a loose unite weight of 2,750 lb/cy. Estimate the loader production in tons based on a 50 min-hour efficiency factor. Use a conservative cycle time and fill factor.

a tire is filled with air at 14 ∘c to a gauge pressure of 230 kpa...

a tire is filled with air at 14 ∘c to a gauge pressure of 230 kpa If the tire reaches a temperature of 35 ∘C∘C, what fraction of the original air must be removed if the original pressure of 230 kPakPa is to be maintained?

Review the factors influencing impression and attraction discussed in chapter 14. Prepare a dual list of...

Review the factors influencing impression and attraction discussed in chapter 14. Prepare a dual list of behaviors indicating what you should and should not do if you wish to make a better impression on other people and to increase their liking for you. What the factors influencing impression and attration discussed?

An air-standard dual cycle has a compression ratio of 14. At the beginning of compression, p1...

An air-standard dual cycle has a compression ratio of 14. At the beginning of compression, p1 = 14.5 lbf/in.2, V1 = 0.5 ft3, and T1 = 50°F. The pressure doubles during the constant-volume heat addition process. For a maximum cycle temperature of 3500°R, determine: (a) the heat addition to the cycle, in Btu. (b) the net work of the cycle, in Btu. (c) the percent thermal efficiency. (d) the mean effective pressure, in lbf/in.2

Question