Question

In: Electrical Engineering

Plot an ideal C-V curve for a Si- SiO2 MOS capacitor at 300 K with NA=5x1015...

Plot an ideal C-V curve for a Si- SiO2 MOS capacitor at 300 K with NA=5x1015 cm-3, d=3 nm (specify Cox, Cmin, CFB and VT). If the metal work function is 4.5 eV, q?=4.05 eV, Qf/q=1011 cm-2, Qm/q=1010 cm-2, Qof/q=5x1010 cm-2, and Qit=0, plot the corresponding CV curve (specify VFB and the new VT).

Solutions

Expert Solution


Related Solutions

MOS Capacitor. If i have a MOS capactitor with: tox=0,1 µm, T=300 K, ND= 1015cm-3 ....
MOS Capacitor. If i have a MOS capactitor with: tox=0,1 µm, T=300 K, ND= 1015cm-3 . Supposing ideal contact, and null flat band potential VFB=0 V. How do I find the substratum electric potential (φn)? How do I obtain the depletion region width in micrometers when the surface potential of the interface between Silicon and Oxide φ(x=0) =φS its equal to reverse substrate potential (φS= - φn)? Is there an electric field Es under the same condition of (φS= -...
MOS capacitor with different metal and semiconductor work functions. At room temperature, using the p+ poly-Si...
MOS capacitor with different metal and semiconductor work functions. At room temperature, using the p+ poly-Si work function ?p+Si = 5.2 eV, electron affinities XSiO2 = 0.95 eV, XSi = 4.05 eV and bandgaps EG,SiO2 = 9 eV, EG,Si = 1.1 eV. For MOS capacitor composed of a p+ poly-Si gate and 1?-cm p-type Si: Sketch accurately, the energy band diagram throughout the MOS capacitor under flatband conditions indicating the band offsets and the energy differences from the vacuum level...
Calculate the resistivities of intrinsic Si, GaAs, and Ge at 300 K
Calculate the resistivities of intrinsic Si, GaAs, and Ge at 300 K
1) The energy gap of Si at 300 K is 1.11 eV. Assume that n =...
1) The energy gap of Si at 300 K is 1.11 eV. Assume that n = 10^16 /cm^3 . We know that for an undoped/intrinsic Si sample that ni = 1.5x10^10/cm3 . Thus this is a doped n-type Silicon sample. 1a) Obtain the hole density p at 300 K for this sample. 1b) Obtain EF – Ei, in eV 1c) Obtain EC – EF, in eV 1d) Sketch the bands (don’t worry about the horizontal axis, just the position of...
Derive C-V characteristics for n-type MOS at high frequency and low frequency
Derive C-V characteristics for n-type MOS at high frequency and low frequency
Derive C-V characteristics for n-type MOS at high frequency and low frequency
Derive C-V characteristics for n-type MOS at high frequency and low frequency
An ideal long-base Si p-n diode has Na = 1017 cm-3, Nd = 7x1016 cm-3 and...
An ideal long-base Si p-n diode has Na = 1017 cm-3, Nd = 7x1016 cm-3 and a cross-sectional area of 10-3 cm2. (i) If τn = τp = 1 µs, calculate the current flowing through the junction under an applied bias of 0.4V. Repeat your calculation for a temperature of 500 K. (ii) Sketch the thermal equilibrium band edge diagram of the p-n junction for both temperatures
Two moles of an ideal gas originally at T = 400 K and V = 40...
Two moles of an ideal gas originally at T = 400 K and V = 40 L undergo a free expansion; ?2 = 10?1 . Find (a) the entropy change of the gas, and (b) the entropy change of the universe?
An ideal gas described by Ti = 300 K, Pi = 2.00 bar, and Vi =...
An ideal gas described by Ti = 300 K, Pi = 2.00 bar, and Vi = 15.0 L is heated at constant volume until P2 = 20.0 bar. It then undergoes a reversible isothermal expansion until P3 = 2.00 bar. It is then restored to its original state by the extraction of heat at constant pressure. Depict this closed-cycle process in a P-V diagram. Calculate number of moles n ( two decimals, as 3.21) = [n]; V2 (unit L, no...
One mole of an ideal monatomic gas initially at 300 K and a pressure of 15.0...
One mole of an ideal monatomic gas initially at 300 K and a pressure of 15.0 atm expands to a final pressure of 1.00 atm. The expansion can occur via any one of four different paths: a. isothermal and reversible, b. isothermal and irreversible, c. adiabatic and reversible, and d. adiabatic and irreversible. In irreversible processes, the expansion occurs against an external pressure of 1.00 atm. For each case, calculate the values of q, w, DU, and DH. I need...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT