Question

In: Physics

A 10.7-V battery, a 4.98-Ω resistor, and a 10.4-H inductor areconnected in series. After the...

A 10.7-V battery, a 4.98-Ω resistor, and a 10.4-H inductor are connected in series. After the current in the circuit has reached its maximum value, calculate the following.

(a) the power being supplied by the battery
W

(b) the power being delivered to the resistor
W

(c) the power being delivered to the inductor
W

(d) the energy stored in the magnetic field of the inductor
J


Solutions

Expert Solution

genius_generous answered 3 years ago
Next > < Previous

Related Solutions

A 24-mH inductor, an 8.1-Ω resistor, and a 5.9-V battery are connected in series as in...
A 24-mH inductor, an 8.1-Ω resistor, and a 5.9-V battery are connected in series as in the figure below. The switch is closed at t = 0. A circuit contains a battery, a switch, an inductor, and a resistor. The circuit starts at the positive terminal of the battery labeled emf ℰ, goes through the switch labeled S, goes through the inductor labeled L, goes through the resistor labeled R and ends at the negative terminal of the battery. (a) Find...
A 24.0-V battery is connected in series with a resistor and an inductor, with R =...
A 24.0-V battery is connected in series with a resistor and an inductor, with R = 4.60 Ω and L = 7.00 H, respectively. (a) Find the energy stored in the inductor when the current reaches its maximum value. ________J (b) Find the energy stored in the inductor at an instant that is a time interval of one time constant after the switch is closed. ________J
A 140-mH inductor and a 4.80-Ω resistor are connected with a switch to a 6.00-V battery...
A 140-mH inductor and a 4.80-Ω resistor are connected with a switch to a 6.00-V battery as shown in the figure above. (a) After the switch is first thrown to a (connecting the battery), what time interval elapses before the current reaches 220 mA? ms (b) What is the current in the inductor 10.0 s after the switch is closed? A (c) Now the switch is quickly thrown from a to b. What time interval elapses before the current in...
A 10.0 v battery, a 5.00 ohm resistor, and a 10.0 H inductor are connected in...
A 10.0 v battery, a 5.00 ohm resistor, and a 10.0 H inductor are connected in series. After the current in the circuit has reached its maximum value, calculate (a) the power being supplied by the battery, (b) the power being delivered to the resistor, (c)the power being delivered to the inductor, and (d) the energy stored in the magnetic field of the inductor.
A 200 Ω resistor is in series with a 8.50×10−2 H inductor and a 0.540 μF...
A 200 Ω resistor is in series with a 8.50×10−2 H inductor and a 0.540 μF capacitor. part A: Compute the impedance of the circuit at a frequency of f1 = 500 Hz and at a frequency of f2 = 1000 Hz . Enter your answer as two numbers separated with a comma. part b: In each case, compute the phase angle of the source voltage with respect to the current. Enter your answer as two numbers separated with a...
You have a 200 Ω resistor, a 0.400-H inductor. Suppose you take the resistor and inductor...
You have a 200 Ω resistor, a 0.400-H inductor. Suppose you take the resistor and inductor and make a series circuit with a voltage source that has voltage amplitude 30.0V and an angular frequency of 250 rad/s. Parts A, B, C For this R-L circuit graph v, vR, and vL versus t for t = 0 to t = 50.0 ms. The current is given by i=Icosωt, so v=Vcos(ωt+ϕ). Part D What are v, vR, and vL at t =...
A resistor of R = 10 Ω is connected in series with an inductor of L...
A resistor of R = 10 Ω is connected in series with an inductor of L = 2 H and a direct voltage source of 50 V forming an RL circuit. Determine the current at time t, assuming that current does not initially flow through the circuit. What is the maximum current flowing through the circuit? In what time is half the maximum current reached?
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor....
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor. The circuit is driven by a power source that oscillates at 20.0 Hz and has an ε_rms value of 90.0 V . The power source is switched on at t = 0 and at that instant the emf is at its maximum value. A) Calculate the power supplied at t = 0.0200 s. B) Calculate the power supplied at t = 0.0375 s. C)...
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor....
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor. The circuit is driven by a power source that oscillates at 20.0 Hz and has an Erms value of 30.0 V . The power source is switched on at t = 0 and at that instant the emf is at its maximum value. Part A Calculate the power supplied at t = 0.0200 s. Part B Calculate the power supplied at t = 0.0375...
One RL series circuit contains the resistor R1= 2 Ω and inductor L = 10 H....
One RL series circuit contains the resistor R1= 2 Ω and inductor L = 10 H. (i) Write the first order differential equation for this circuit in time constant form. (ii) Determine the time constant for this system (iii) Calculate the steady state gain of the system. (iv) Determine the time constant and steady state gain when the inductance is doubled (v) In the context of positioning of poles on the S-plane, what does the ‘real part’ represent and what...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT