Question
In: Physics
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor....
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor. The circuit is driven by a power source that oscillates at 20.0 Hz and has an ε_rms value of 90.0 V . The power source is switched on at t = 0 and at that instant the emf is at its maximum value.
A) Calculate the power supplied at t = 0.0200 s.
B) Calculate the power supplied at t = 0.0375 s.
C) Calculate the power supplied at t = 0.0500 s.
Solutions
genius_generous answered 2 years agoRelated Solutions
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor....
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF
capacitor, and a 1.00-H inductor. The circuit is driven by a power
source that oscillates at 20.0 Hz and has an Erms value of 30.0 V .
The power source is switched on at t = 0 and at that instant the
emf is at its maximum value.
Part A Calculate the power supplied at t = 0.0200 s.
Part B Calculate the power supplied at t = 0.0375...
A series RLC circuit consists of a 58.0 ? resistor, a 2.50 mH inductor, and a...
A series RLC circuit consists of a 58.0 ? resistor, a
2.50 mH inductor, and a 450 nF capacitor. It is connected to a 3.0
kHz oscillator with a peak voltage of 5.60 V. What is the
instantaneous emf E when i = I ? What is the
instantaneous emf E when i = 0A and is decreasing? What is
the instantaneous emf E when i = - I ?
A series RLC circuit consists of a 56.0 ? resistor, a 3.80 mH inductor, and a...
A series RLC circuit consists of a 56.0 ? resistor, a
3.80 mH inductor, and a 400 nF capacitor. It is connected to a 3.0
kHz oscillator with a peak voltage of 4.10 V.
Part A
What is the instantaneous emf E when i =I?
Express your answer with the appropriate units.
0V
SubmitHintsMy
AnswersGive UpReview
Part
Incorrect; Try Again; 5 attempts remaining
Part B
What is the instantaneous emf E when i =0A and is
decreasing?
Express your answer...
An RLC series circuit has a 60 Ω resistor, a 3.5 mH inductor, and a 6...
An RLC series circuit has a 60 Ω resistor, a 3.5 mH inductor,
and a 6 μF capacitor.
Find the circuit’s impedance at 55 Hz and 12 kHz.
If the voltage source has Vrms = 110 V, what is
Irms at each frequency?
An RLC series circuit has a 2.50 Ω resistor, a 100 µH inductor, and an 87.5...
An RLC series circuit has a 2.50 Ω resistor, a 100 µH inductor,
and an 87.5 µFcapacitor.
(a)
If the voltage source is Vrms = 5.60 V , what is the Irms at 120
Hz?
A ( ± 0.001 A)
(b)
What is the phase angle of the current vs voltage at this
frequency? Enter a positive number between 0 and 90
degrees ( ± 0.1 degrees)
(c)
What is the Irms at 5.0 kHz?
A ( ± 0.01 A)...
An RLC series circuit has a 2.60 Ω resistor, a 200 µH inductor, and an 82.0...
An RLC series circuit has a 2.60 Ω resistor, a 200 µH
inductor, and an 82.0 µF capacitor.
(a) Find the circuit's impedance (in Ω) at 120 Hz.
________Ω
(b) Find the circuit's impedance (in Ω) at 5.00 kHz.
________Ω
(c) If the voltage source has Vrms
= 5.60 V, what is Irms (in A) at each
frequency?
Irms, 120 Hz= _______A
Irms, 5.00 kHz= _______A
(d) What is the resonant frequency (in kHz) of the circuit?
________kHz
(e) What...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH inductor, and a 25.0...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH
inductor, and a 25.0 nF capacitor.
(a)
Find the circuit's impedance (in Ω) at 490 Hz.
12539.57588 Ω
(b)
Find the circuit's impedance (in Ω) at 7.50 kHz.
6765.310603 Ω
(c)
If the voltage source has Vrms = 408 V, what
is Irms (in mA) at each frequency?
mA (at 490 Hz)
mA (at 7.50 kHz)
(d)
What is the resonant frequency (in kHz) of the circuit?
kHz...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH inductor, and a 25.0...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH
inductor, and a 25.0 nF capacitor.
(a)
Find the circuit's impedance (in Ω) at 490 Hz.
Ω
(b)
Find the circuit's impedance (in Ω) at 7.50 kHz.
Ω
(c)
If the voltage source has Vrms = 408 V, what
is Irms (in mA) at each frequency?
mA (at 490 Hz)
mA (at 7.50 kHz)
(d)
What is the resonant frequency (in kHz) of the circuit?
kHz
(e)
What...
Suppose an electrical circuit contains a 1 H inductor, a 10 Ω resistor and a capacitor...
Suppose an electrical circuit contains a 1 H inductor, a 10 Ω
resistor and a capacitor rated at 1/7 F. If the circuit is hooked
up to an alternating voltage source described by E(t) = 68 cost V
and initially q(0) = 1 C and i(0) = 0 A, find a function that
describes the charge as a function of time. Lq'' + Rq' +
q/C = E(t).
Please show work using a complementary and particular solution
if possible.
An RLC series circuit has a 2.60 ? resistor, a 200 µH inductor, and a 78.0 µF capacitor.
An RLC series circuit has a 2.60 ? resistor, a 200 µH inductor, and a 78.0 µF capacitor.
(a) Find the circuit's impedance (in ?) at 120 Hz.
(b) Find the circuit's impedance (in ?) at 5.00 kHz.
(c) If the voltage source has Vrms = 5.60 V, what is Irms (in A) at each frequency?
Irms, 120 Hz =_____ A
Irms, 5.00 kHz =_____A
(d) What is the resonant frequency (in kHz) of the circuit?
(e) What is...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Suppose Rialto is the only movie cinema in a small college town, so it is essentially...
- With VMI, members of the supply chain share planning, demand, forecasting, and inventory information.
- Large lots are desirable in supply chain coordination despite increasing holding costs.
- ***Convert the C++ to Python*** #include <iostream> using std::cout; using std::cin; using std::endl; int charClass; char...
- Make-or-Buy Decision Fremont Computer Company has been purchasing carrying cases for its portable computers at a...
- The following costs were incurred for the single product produced during the first year of operations...
- Non-constant growth model: Do=$2.00 required return on equity= 5% g= 9% n=1,2 g=7% n=3,4 g=3% n=5...
ADVERTISEMENT