A 200 Ω resistor is in series with a 8.50×10−2 H inductor and a 0.540 μF...

A 200 Ω resistor is in series with a 8.50×10⁻² H inductor and a 0.540 μF capacitor.

part A: Compute the impedance of the circuit at a frequency of f1 = 500 Hz and at a frequency of f2 = 1000 Hz .

Enter your answer as two numbers separated with a comma.

part b: In each case, compute the phase angle of the source voltage with respect to the current.

Enter your answer as two numbers separated with a comma.

part c: State whether the source voltage lags or leads the current at a frequency 500 Hz .

part d: State whether the source voltage lags or leads the current at a frequency 1000 Hz .

Expert Solution

This can be done by knowing the relation for impedance, capacitive reactance and inductive reactance.

genius_generous answered 2 hours ago

A 215 Ω resistor, a 0.900 H inductor, and a 6.50 μF capacitor are connected in...

A 215 Ω resistor, a 0.900 H inductor, and a 6.50 μF capacitor are connected in series across a voltage source that has voltage amplitude 29.5 Vand an angular frequency of 220 rad/s . a) What is v at t= 18.0 ms ? ANS: -27.7V b) What is vR at t= 18.0 ms ? c)What is vL at t= 18.0 ms ? d)What is vC at t= 18.0 ms ? e)What is VR? f)What is VC? g)What is VL?

A 197 Ω resistor, a 0.925 H inductor, and a 5.75 μF capacitor are connected in...

A 197 Ω resistor, a 0.925 H inductor, and a 5.75 μF capacitor are connected in series across a voltage source that has voltage amplitude 31.5 V and an angular frequency of 230 rad/s. What is v at t= 19.0 ms? What is vR at t= 19.0 ms? What is vL at t= 19.0 ms? What is vC at t= 19.0 ms? Compare vC+vL+vR and v at this instant. What is VR? What is VC? What is VL? Compare V and...

A 190 Ω resistor, a 0.875 H inductor, and a 5.75 μF capacitor are connected in...

A 190 Ω resistor, a 0.875 H inductor, and a 5.75 μF capacitor are connected in series across a voltage source that has voltage amplitude 32.0 V and an angular frequency of 270 rad/s. A. What is v at t= 22.0 ms ? B. What is vR at t= 22.0 ms ? C. What is vL at t= 22.0 ms ? D. What is vC at t= 22.0 ms ? E. Compare vC+vL+vR and v at this instant: vC+vL+vR<v vC+vL+vR>v...

One RL series circuit contains the resistor R1= 2 Ω and inductor L = 10 H....

One RL series circuit contains the resistor R1= 2 Ω and inductor L = 10 H. (i) Write the first order differential equation for this circuit in time constant form. (ii) Determine the time constant for this system (iii) Calculate the steady state gain of the system. (iv) Determine the time constant and steady state gain when the inductance is doubled (v) In the context of positioning of poles on the S-plane, what does the ‘real part’ represent and what...

A series ac circuit contains a 210 Ω resistor, a 20.0 mH inductor, a 3.30 μF...

A series ac circuit contains a 210 Ω resistor, a 20.0 mH inductor, a 3.30 μF capacitor, and an ac power source of voltage amplitude 45.0 V operating at an angular frequency of 360 rad/s . 1)What is the power factor of this circuit? 2)Find the average power delivered to the entire circuit. 3)What is the average power delivered to the resistor, to the capacitor, and to the inductor?

A resistor of R = 10 Ω is connected in series with an inductor of L...

A resistor of R = 10 Ω is connected in series with an inductor of L = 2 H and a direct voltage source of 50 V forming an RL circuit. Determine the current at time t, assuming that current does not initially flow through the circuit. What is the maximum current flowing through the circuit? In what time is half the maximum current reached?

An RLC series circuit has a 2.60 Ω resistor, a 200 µH inductor, and an 82.0...

An RLC series circuit has a 2.60 Ω resistor, a 200 µH inductor, and an 82.0 µF capacitor. (a) Find the circuit's impedance (in Ω) at 120 Hz. ________Ω (b) Find the circuit's impedance (in Ω) at 5.00 kHz. ________Ω (c) If the voltage source has Vrms = 5.60 V, what is Irms (in A) at each frequency? Irms, 120 Hz= _______A Irms, 5.00 kHz= _______A (d) What is the resonant frequency (in kHz) of the circuit? ________kHz (e) What...

A 10.7-V battery, a 4.98-Ω resistor, and a 10.4-H inductor areconnected in series. After the...

A 10.7-V battery, a 4.98-Ω resistor, and a 10.4-H inductor are connected in series. After the current in the circuit has reached its maximum value, calculate the following.(a) the power being supplied by the batteryW(b) the power being delivered to the resistorW(c) the power being delivered to the inductorW(d) the energy stored in the magnetic field of the inductorJ

Suppose an electrical circuit contains a 1 H inductor, a 10 Ω resistor and a capacitor...

Suppose an electrical circuit contains a 1 H inductor, a 10 Ω resistor and a capacitor rated at 1/7 F. If the circuit is hooked up to an alternating voltage source described by E(t) = 68 cost V and initially q(0) = 1 C and i(0) = 0 A, find a function that describes the charge as a function of time. Lq'' + Rq' + q/C = E(t). Please show work using a complementary and particular solution if possible.

An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor....

An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor. The circuit is driven by a power source that oscillates at 20.0 Hz and has an ε_rms value of 90.0 V . The power source is switched on at t = 0 and at that instant the emf is at its maximum value. A) Calculate the power supplied at t = 0.0200 s. B) Calculate the power supplied at t = 0.0375 s. C)...

Question