A SMC is being used to mold the outer panel of an automobile hood. The inner...

A SMC is being used to mold the outer panel of an automobile hood. The inner panel of the hood will be made from a thin-gage steel. Write three concerns you may have for using SMC in this application. Suggest a method of improving the stiffness of the outer panel without increasing its weight and discuss a molding defect that may be associated with this method.

Expert Solution

hence applications of smc ,suggestion for improving stiffness and molding defect associated with it can be done.

samet mamat answered 1 year ago

Give an example of an inner and outer class. (Java)

3. Assume an annulus of inner radius r1 and outer radius r2. The inner surface is...

3. Assume an annulus of inner radius r1 and outer radius r2. The inner surface is at T1, the outer surface at T2, T1 > T2. Assume heat transfer between the surfaces by conduction, with a variable conductivity, k = a + bT, develop an expression for the temperature in the material of the annulus.

A hollow, conducting sphere with an outer radius of .250 m and an inner radius of...

A hollow, conducting sphere with an outer radius of .250 m and an inner radius of .200 m has a uniform surface charge density of -6.37 muC/me2.When a charge is now introduced at the center of the cavity inside the sphere, the new charge density on the outside of the sphere is -4.46 muC/me2. What is the charge at the center of the cavity?

A potential difference of V0 is maintained between the inner and outer conductor of a coaxial...

A potential difference of V0 is maintained between the inner and outer conductor of a coaxial cable of length L, inner conductor radius a, and outer conductor radius b. (a) Calculate the current through the medium (∈,σ) using the analogy of ?⃗ and ?⃗⃗⃗. (b) Now, assume that V0 = 500 V, L = 50 m, a = 2 cm and b = 6 cm, and the relative permittivity and the conductivity of the medium are ∈?=3 and σ=5 μS/m,...

A short and hollow cylindrical bar, having an outer diameter of 4.00 in and an inner...

A short and hollow cylindrical bar, having an outer diameter of 4.00 in and an inner diameter of 7 in, is subjected to two simultaneous loads - an axial compressive force of 75,100 lb. and a torsional moment of 20,100 lb • in. You are required to create two-dimensional (2D) and three-dimensional (3D) stress elements for two stress states on the outer and inner surfaces of the bar to in-plane and out-of-plane stresses, respectively and then draw the 2D and...

A hollow, conducting sphere with an outer radius of 0.240 m and an inner radius of...

A hollow, conducting sphere with an outer radius of 0.240 m and an inner radius of 0.200 m has a uniform surface charge density of +6.37 × 10−6 C/m2. A charge of -0.400 μC is now introduced into the cavity inside the sphere. What is the new charge density on the outside of the sphere? Express your answer with the appropriate units. Calculate the strength of the electric field just outside the sphere. Express your answer with the appropriate units....

What is the relevance of the outer game and the inner game on your leadership behavior?...

What is the relevance of the outer game and the inner game on your leadership behavior? What points of leverage and strategies are given for increasing motivation and employee satisfaction? What variables affect motivation and satisfaction? Why?

68) As you go from the cortex to the outer medulla and to the inner medulla...

68) As you go from the cortex to the outer medulla and to the inner medulla the interstitial solute concentration_______ Increases Stays about the same Decreases None of these 69) Osmoregulation involves the Homeostasis of the Blood platelets Brain tissue Water and solutes inside the body of an animal Red blood cell number Use the next 5 answer choices for the next seven questions (some questions require you to mark two answer choices on your scantron) A) Antidiuretic hormone (ADH)...

heat exchanger has water in the outer conduit and ethylene glycol in the inner. It is...

heat exchanger has water in the outer conduit and ethylene glycol in the inner. It is desired to have a Reynolds number of 1000 in the inner conduit and 15000 in the outer conduit. The inner conduit is 5mm inside diameter and the outer conduit is 12mm inside diameter. Specify the pressure drop per unit length in the each conduit (Pa/m). The inner conduit has a wall thickness of 0.75 mm.

The outer and inner boundaires of prandtl stress potential functions have what restrictions

Question