A short and hollow cylindrical bar, having an outer diameter of 4.00 in and an inner...

A short and hollow cylindrical bar, having an outer diameter of 4.00 in and an inner diameter of 7 in, is
subjected to two simultaneous loads - an axial compressive force of 75,100 lb. and a torsional moment of
20,100 lb • in.
You are required to create two-dimensional (2D) and three-dimensional (3D) stress elements for two stress
states on the outer and inner surfaces of the bar to in-plane and out-of-plane stresses, respectively and then
draw the 2D and 3D Mohr's circles for these two cases.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

Consider a long straight hollow cylindrical metal tube with an inner diameter of R. The possible...

Consider a long straight hollow cylindrical metal tube with an inner diameter of R. The possible TE modes and TM modes for electromagnetic waves to propagate in this wave guide system

A long, hollow, cylindrical conductor (inner radius 2.4 mm, outer radius 4.4 mm) carries a current...

A long, hollow, cylindrical conductor (inner radius 2.4 mm, outer radius 4.4 mm) carries a current of 45 A distributed uniformly across its cross section. A long thin wire that is coaxial with the cylinder carries a current of 24 A in the opposite direction. What is the magnitude of the magnetic field (a) 1.4 mm, (b) 2.6 mm, and(c) 4.7 mm from the central axis of the wire and cylinder?

A hollow, conducting sphere with an outer radius of .250 m and an inner radius of...

A hollow, conducting sphere with an outer radius of .250 m and an inner radius of .200 m has a uniform surface charge density of -6.37 muC/me2.When a charge is now introduced at the center of the cavity inside the sphere, the new charge density on the outside of the sphere is -4.46 muC/me2. What is the charge at the center of the cavity?

A hollow, conducting sphere with an outer radius of 0.240 m and an inner radius of...

A hollow, conducting sphere with an outer radius of 0.240 m and an inner radius of 0.200 m has a uniform surface charge density of +6.37 × 10−6 C/m2. A charge of -0.400 μC is now introduced into the cavity inside the sphere. What is the new charge density on the outside of the sphere? Express your answer with the appropriate units. Calculate the strength of the electric field just outside the sphere. Express your answer with the appropriate units....

A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of...

A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of 0.1 cm is made of a body-centered-cubic (bcc) paramagnetic material with lattice parameter equal to 0.5 nm. The toroid is wrapped by a copper wire in 20 turns. If each atom of the magnetic material has a magnetic moment of 1.5µB (Bohr Magneton), (a) (1.5 pt) What is the saturation magnetization (in A/m) of the material? (b) (1.5 pt) If a current of 2...

electric current flows through an infinitely long hollow cylindrical copper bar having internal and external diameters...

electric current flows through an infinitely long hollow cylindrical copper bar having internal and external diameters of 15 mm and 25 mm respectively. The temperature on the bar internal and external surfaces are maintained constant. The bar carries a current density of 5.5 x 107 A/m2 and the internal surface temperature is maintained at 45oC with no heat loss from the external surface due to insulation. The copper bar has thermal conductivity of 380 W/m.K and electrical resistivity of 2.5...

‏1. The impeller in a centrifugal pump has inner diameter as 125 mm and outer diameter...

‏1. The impeller in a centrifugal pump has inner diameter as 125 mm and outer diameter as 270 mm. The pump runs at 1400 rpm. The vane angles of impeller at inlet and outlet are 17° and 30° respectively. The water enters the impeller radially and velocity of flow is constant. Determine the work done by impeller per unit weight of water.

A brass ring with inner diameter 2.00 cm and outer diameter 3.00 cm needs to fit...

A brass ring with inner diameter 2.00 cm and outer diameter 3.00 cm needs to fit over a 2.00 cm-diameter steel rod, but at 20∘C the hole through the brass ring is 48 μmtoo small in diameter. To what temperature, in ∘C, must the rod and ring be heated so that the ring just barely slips over the rod?

A hollow cylindrical container has an inner radius of 7.3040 cm as stated from the manufacturer....

A hollow cylindrical container has an inner radius of 7.3040 cm as stated from the manufacturer. The height of container is measured to be 20.50 cm. The thickness of the container walls can be neglected. For each part, round the final answer to the correct number of significant figures. a) Calculate the volume of this cylinder with the correct number of significant figures and units of . b) The container is filled to the top with water. The water molecules...

A long straight cylindrical shell has an inner radius Ri and an outer radius R0.

A long straight cylindrical shell has an inner radius Ri and an outer radius R0. It carries a current I, uniformly distributed over its cross section. A wire is parallel to the cylinder axis, in the hollow region (r < Ri). The magnetic field is zero everywhere outside the shell (r > R0).We conclude that the wire: A) is on the cylinder axis and carries current I in the same direction as the current in the shell B) may be anywhere in...

Subjects