Structural Dynamic. Assume and draw 7 story building with using different K Stiffness for column and...

Structural Dynamic. Assume and draw 7 story building with using different K Stiffness for column and M mass value for slab to show how the mass M and K stiffness matrix will be looks like for 7 story building For column do use like 2K, 1.5 K. 3 K and slab like 2m, 3m, 1.5 m and to see and learn how to obtain the mass and stiffness matrix for 7 story building in term of K and m only. Provide sketch and equation of Motion for un-damped structure

Expert Solution

Ally Wells answered 2 years ago

4. In a two – story building, an exterior column is to be designed for a...

4. In a two – story building, an exterior column is to be designed for a service dead load of 1000 KN, maximum live load of 1500 KN, dead load moment of 60 KN m, and live load moment of 90 KN m. If the column dimensions will be restricted to 400 mm x 500 mm, fc’ = 27.6 MPa, and fy = 414 MPa, calculate the required column reinforcement

In a two – story building, an exterior column is to be designed for a service...

In a two – story building, an exterior column is to be designed for a service dead load of 1000 KN, maximum live load of 1500 KN, dead load moment of 60 KN m, and live load moment of 90 KN m. If the column dimensions will be restricted to 400 mm x 500 mm, fc’ = 27.6 MPa, and fy = 414 MPa, calculate the required column reinforcement.

1. A developer in Chicago is planning to build a 7 story building with 28 condo...

1. A developer in Chicago is planning to build a 7 story building with 28 condo units (14 one bedroom units and 14 two bedroom units). The target market is the growth in new households living within a 1 mile radius of downtown Chicago with age groups 25-64. The construction takes approximately one year and is expected to be completed at the end of 2019. From comparable pricing data, they expect to sell the one bedroom condos for $750,000 each...

3. Draw the hash table that results using the hash function: h(k)=kmod 7 to hash the...

3. Draw the hash table that results using the hash function: h(k)=kmod 7 to hash the keys 50, 700, 76, 85, 92, 73, 101. Assuming collisions are handled by Quadratic probing. Don't write a program. Just please manually solve the problem. Thanks.

Question 1 Run a regression model to estimate the cost of a building using average story...

Question 1 Run a regression model to estimate the cost of a building using average story height (mean centered) and total floor area (mean centered) as predictors. Using the adjusted R Square statistic, how much variation in the dependent variable can be explained by the model? Select one: a. between 95% and 98% b. above 98 percent c. between 90% and 95% d. less than 90% Question 2 Run a regression model to estimate the cost of a building using...

CREC, Inc. owns a 1-story frame building with protection class 7 which has a limit of...

CREC, Inc. owns a 1-story frame building with protection class 7 which has a limit of insurance at $100,000, a covered causes of loss special form and a replacement cost inflation guard of 4%. CREC insures its business personal property with a limit of $25,000, covered causes of loss special form and a no dollar limit on business income and extra expenses but it is subject to a twelve (12) month maximum. Q: The replacement cost of the building is...

Working as a school nurse in a K-7 building you are asked to present proposed preventive...

Working as a school nurse in a K-7 building you are asked to present proposed preventive programs for 3 grade levels that you choose to the administrator and parent teacher organization leaders. Topic is to address the increase in childhood obesity. In three separate paragraphs detail the primary, secondary and tertiary preventive programs you will present, include the setting, participants, length of the program, budget considerations and how you will evaluate effectiveness.

Determine the allowable axial compressive load for a 25-foot long A992 W8X40 structural steel column using...

Determine the allowable axial compressive load for a 25-foot long A992 W8X40 structural steel column using the AISC procedure as indicated in your textbook. The bottom of the column is fixed, an the top is pinned. Use the material properties and dimensions as indicated in the appendices of your textbook. 250.3k 131.4k 215.8k 283.4k

K-means clustering: a. In the k-means lab, you examined different values for k using the "knee"...

K-means clustering: a. In the k-means lab, you examined different values for k using the "knee" heuristic to pick the best value of k. Explain what is so special about the k values on the “knee”? Hint: There are two properties that together make these values of k special. b. Give an example of a type of data (data type) that k-means should not be used for and explain why.

6. The dynamic spring constant k (in N/m) determined using an oscillating vertical spring is directly...

6. The dynamic spring constant k (in N/m) determined using an oscillating vertical spring is directly related to: - the reciprocal of the slope of a graph of period squared (in s2) as a function of total added mass (in kg) - the slope of a graph of period squared (in s2) as a function of total added mass (in kg) - the reciprocal of the slope of a graph of period (in s) as a function of total added...

Question