Determine whether the integrals are divergent or convergent. Calculate the convergent ones. ?)∫ 1 / ?^2+?...

Determine whether the integrals are divergent or convergent. Calculate the convergent ones.

?)∫ 1 / ?^2+? ?x (from 1 to positive infinity)

?) ∫ ? −√? / √? ?? ( from 1 to positive infinity)

?) ∫ ??????? (negative infinity to positive infinity)

?) ∫ 1 / √3−? ?x ( from 2 to 3)

Expert Solution

I attach the solution below .If I infer any expression wrong than let me now ? And than correct me.

milcah answered 2 years ago

Please solve fully Determine whether the geometric series is convergent or divergent. If it is convergent,...

Please solve fully Determine whether the geometric series is convergent or divergent. If it is convergent, find its sum.8 − 11 + 121 8 − 1331 64 + Step 1 To see 8 − 11 + 121 8 − 1331 64 + as a geometric series, we must express it as ∞ ar n − 1 n = 1 . For any two successive terms in the geometric series ∞ ar n − 1 n = 1 , the ratio of...

\sum _{n=1}^{\infty }\:\frac{4\left(-1\right)^n+2^n}{3^n} Determine whether the series is convergent or divergent. If it is convergent, find...

\sum _{n=1}^{\infty }\:\frac{4\left(-1\right)^n+2^n}{3^n} Determine whether the series is convergent or divergent. If it is convergent, find its sum.

How can you decide whether an organisation is more convergent or divergent in its strategy?

A convergent-divergent duct has a throat area that is 1/3 the area of the inlet. If...

A convergent-divergent duct has a throat area that is 1/3 the area of the inlet. If the pressure at the throat is 95lbft2 less than the pressure at the inlet, what is the inlet velocity, assuming density is .002 slugs/ft3 ?

Q2/ Superheated steam enters convergent divergent nozzles at (2 MN/m²) and ( 325 C°) with mass...

Q2/ Superheated steam enters convergent divergent nozzles at (2 MN/m²) and ( 325 C°) with mass flow rate (7.5 kg/sec ). It is expand according to (PV 13= C) through the nozzles until exit, while the exit pressure (0.36 MN/m³) Calculate 1/throat and exit diameter. 2/temperature degree of undercooling at exit.

Problem 1: Carbon dioxide flows isentropically at the rate of 1 kg/s through a convergent-divergent nozzle....

Problem 1: Carbon dioxide flows isentropically at the rate of 1 kg/s through a convergent-divergent nozzle. The stagnation temperature is 310 K and the stagnation pressure is 1400 kPa. If the exit pressure is 101.3 kPa, determine a) throat area, b) exit Mach number and c) exit velocity. Assume sonic (M =1) conditions at throat. (d) plot using MS excel variation of: total temperature, total pressure, total density, density, temperature, Mach number, velocity, speed of sound along the centre line...

convergent or divergent infinity sigma n = 1 sqrt(n^5+ n^3 -7) / (n^3-n^2+n)

Air is supplied to a convergent–divergent nozzle from a large tank in which the pressure and...

Air is supplied to a convergent–divergent nozzle from a large tank in which the pressure and temperature are kept at 700 kPa and 40°C, respectively. If the nozzle has an exit area that is 1.6 times the throat area and if a normal shock occurs in the nozzle at a section where the area is 1.2 times the throat area, find the pressure, temperature, and Mach number at the nozzle exit. Assume one-dimensional, isentropic flow.

A convergent–divergent nozzle with an exit area to throat area ratio of 3 is supplied with...

A convergent–divergent nozzle with an exit area to throat area ratio of 3 is supplied with air from a reservoir in which the pressure is 350 kPa. The air from the nozzle is discharged into another large reservoir. It is found that the flow leaving the nozzle exit is directed inward at an angle of 4° to the nozzle centerline. The velocity on the nozzle exit plane is supersonic. What is the pressure in the second reservoir?

Use the Integral Test to determine whether the infinite series is convergent. Sum from n=1 to...

Use the Integral Test to determine whether the infinite series is convergent. Sum from n=1 to infinity of 5/(n(n+1))

Question