Question
In: Mechanical Engineering
An ideal Rankine cycle with regenerative system. Steam enters the turbine at 6000 kPa and 450oC...
An ideal Rankine cycle with regenerative system. Steam enters
the turbine at 6000 kPa and 450oC and is condensed in the condenser
at 20 kPa. It the steam is extracted from the turbine at 400 kPa to
heat
the feedwater in an open feedwater heater and the water leaves
the feedwater heater as a saturated liquid.
Find the rate of heat added in the boiler?
Find the rate of heat rejected in the condenser?
Determine the network output per kilogram of steam flowing
through the boiler.
The thermal efficiency of the cycle.
Show the cycle on a T-s diagram
Solutions
samet mamat answered 1 year agoRelated Solutions
A steam power plant operates on a regenerative Rankine cycle. Steam enters the turbine at 6...
A steam power plant operates on a regenerative Rankine cycle.
Steam enters the turbine at 6 MPa at 700 ºC and the condenser at 10
kPa. Turbine has isentropic efficiency of 85% and pumps have
isentropic efficiency of 90%. Steam is extracted from the turbine
at 0.6 MPa to heat the feedwater in an open feedwater heater. Water
leaves the open feedwater heater as saturated liquid.
a) Draw the system with labels and show the ideal and the
non-ideal cycle...
A steam power plant operates on the simple ideal rankine cycle. the steam enters the turbine...
A
steam power plant operates on the simple ideal rankine cycle. the
steam enters the turbine at 4 MPa and 500 C and leaves it at 50 kPa
and 150 C. the water leaves the condenser as a saturated liquid and
is subsequently displaced to the boiler by means of a pump at a
temperature of 85 C, which is the isentrophic efficiency of the
turbine?
Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine...
Consider a steam power plant operating on the simple ideal
Rankine cycle. Steam enters the turbine at 15 MPa and 600°C. The
steam condenses in the condenser at 10 kPa. Use the EES software to
study the effects of the following cases on the cycle performance
and to sketch the T-s diagram for each case:
Plot the variation of the cycle thermal efficiency with the
turbine isentropic efficiency. Take the isentropic efficiency of
the turbine in the range 70% to...
Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine...
Consider a steam power plant operating on the simple ideal
Rankine cycle. Steam enters the turbine at 15 MPa and 600°C. The
steam condenses in the condenser at 10 kPa. Use the EES software to
study the effects of the following cases on the cycle performance
and to sketch the T-s diagram for each case:
#Plot the variation of the cycle thermal efficiency with the
turbine isentropic efficiency. Take the isentropic efficiency of
the turbine in the range 70% to...
In an ideal Rankine cycle with reheat, superheated steam vapor enters the turbine at 10 MPa...
In an ideal Rankine cycle with reheat, superheated steam vapor
enters the turbine at 10 MPa and
480 °C, while the condenser pressure is 6 kPa. Steam expands
through the first-stage turbine to
0.7 MPa and then is reheated to 480 °C
a) Calculate the total heat addition, net work of the cycle, heat
extraction through condenser,
and thermal efficiency of this ideal Rankine cycle with reheat.
[25]
b) Calculate the same quantities assuming that the pump and each
turbine...
Consider steam in an ideal Rankine cycle. The saturated vapor enters the turbine at 8.0 MPa.
Consider steam in an ideal Rankine cycle. The saturated vapor enters the turbine at 8.0 MPa. Saturated liquid exits the condenser at P = 0.008 MPa. The net power output of the cycle is 100 MW.
determine the thermal efficiency of the cycle
In an ideal Rankine cycle with reheat, superheated steam vapor enters the turbine at 10 MPa...
In an ideal Rankine cycle with reheat, superheated steam vapor
enters the turbine at 10 MPa and
480 °C, while the condenser pressure is 6 kPa. Steam expands
through the first-stage turbine to
0.7 MPa and then is reheated to 480 °C
a) For a pressure of 7 bar right after the first stage turbine in
the ideal Rankine cycle, create
two plots: thermal efficiency as a function of the reheat
temperature from 200 °C to
500 °C; and the...
In an ideal Rankine cycle with reheat, superheated steam vapor enters the turbine at 10 MPa...
In an ideal Rankine cycle with reheat, superheated steam vapor
enters the turbine at 10 MPa and
480 °C, while the condenser pressure is 6 kPa. Steam expands
through the first-stage turbine to
0.7 MPa and then is reheated to 480 °C.
Calculate the total heat addition, net work of the cycle, heat
extraction through condenser,
and thermal efficiency of this ideal Rankine cycle with
reheat
A steam power plant operates on a practical Rankine Cycle. The steam enters the turbine at...
A steam power plant operates on a practical Rankine Cycle. The
steam enters the turbine at 3 MPa and “648” K and is condensed in
the condenser at a pressure of 46 kPa. You are assigned on a
project to improve the thermal efficiency of this plant. a) Draw
the schematic of the plant and determine the thermal efficiency of
the practical cycle assuming that the efficiencies of pump and
turbine are 0.75 and 0.7, respectively. ( b) Draw a...
Steam is the working fluid in an ideal Rankine cycle with superheat and reheat. Steam enters...
Steam is the working fluid in an ideal Rankine cycle with
superheat and reheat. Steam
enters the high-pressure turbine at 8.0MPa, 480̊C, and expands to
0.6MPa. It is then reheatedto 450̊C before entering the
low-pressure turbine where it expands to the condenser pressure of
10kPa. The net power output is 110MW.
A closed feedwater heater (CFWH) which uses steam extracted fromthe
low-pressure turbine at 0.5MP. The extracted steam leaves the CFWH
as a saturated liquid and is then pumped up...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Critical Thinking The global marketplace has witnessed an increased pressure from customers and competitors in manufacturing...
- A cubic polynomial is of the form: f(x) = Ax^3 + Bx^2 + Cx + D...
- In Java The Problem In his book Irreligion, the mathematician John Allen Paulos tells an amusing...
- (EAC) Brandy's Place has decided to purchase a new branding machine. Brandy will buy one of...
- You deposit $175,000 in a savings account. The APR (Annual Percentage Rate) is 6%. Calculate the...
- AN OUNCE OF CURE QUESTIONS: QUESTION 1 Connie, the 15-year old protagonist, in Oates's story is...
- Compare and Contrast tacit knowledge and explicit knowledge. (and use real-life examples) Explain why organizational...
ADVERTISEMENT