Question

In: Anatomy and Physiology

luid pressure in a container is dependent on the ___________________. a. height of the fluid column...

luid pressure in a container is dependent on the ___________________. a. height of the fluid column only b. density and colour of the fluid c. height of the fluid column and the density of the fluid d. colour of the fluid only e. density of the fluid only

Solutions

Expert Solution

The two main factors that will influence the pressure of fluids in a container . They are the specific depth of the fluid in the container as well as its density. A fluid will also exert more pressure at an increased depths . When the depth increase the pressure of all the fluid above will also increase and will cause an increase in the fluid pressure .

Pressure at a specific Depth for the Fluid of Constant Density and  ρ is the density and when this density increase the p that is the pressure will increase

p=p0+ρhg, Where p is the pressure of the fluid at a particular depth of the container as when depth increase the pressure will increase , p0 is the pressure of the atmosphere which is a constant , ρ is the density of the fluid and pressure will increase if this increase as pressure is directly proportional to the density of fluid, g is the acceleration due to gravity, and h is the depth as depth increase pressure increases and this will lead to and increase in pressure as both pressure and depth are directly proportional.

So option c is the correct answer

Option a is wrong as density also affects

Option b is wrong as colour does not increase pressure

Option d is wrong as colour of fluid is not having effect on pressure

Option e is wrong as height also affect it


Related Solutions

Question 1. The height of a mercury column for atmospheric pressure at sea level is h...
Question 1. The height of a mercury column for atmospheric pressure at sea level is h = 0.760 + or - 0.003m of mercury (m-Hg).If the density of mercury is p = 13600 + or - 1000kg/m3 and the acceleration due to gravity, g = 9.8 + or - 0.1ms-2 , determine the value of atmospheric pressure Po = pgh and its uncertainty in SI units. Question 2. A particle is moving in a straight line so that its velocity...
A conical container of radius 10ft and height 40ft is filled to a height of 38...
A conical container of radius 10ft and height 40ft is filled to a height of 38 ft of a liquid weighing 62.4 lb/ft^3. How much work will it take to pump the contents to the rim? How much work will it take to pump the liquid to a level of 2 ft. above the cone's rim?
1. Explain the effects of distillation rate, column packing, and column height on fractionation. When is...
1. Explain the effects of distillation rate, column packing, and column height on fractionation. When is a fractionating column not necessary? (3 points) minimum of 150 words.
A small gas bubble grows in a large container of a Newtonian fluid. As the bubble...
A small gas bubble grows in a large container of a Newtonian fluid. As the bubble grows, it pushes liquid away radially. We can ignore the inertia in the liquid, i.e. Re is small. By solving for the flow in the liquid and using the boundary condition at the bubble/liquid interface, we can determine how the bubble growth rate, i.e. the bubble radius R as a function of time, depends on the pressure in the bubble and liquid parameters. a)...
Optimization of a cylinder container with a height of 4 inches and a radius of 1.25...
Optimization of a cylinder container with a height of 4 inches and a radius of 1.25 inches in terms of either volume OR surface area. Please provide: (A) Calculation of surface area/volume of the container. (B) Primary and secondary constraint equations (C) Derivative of primary equation (D) Optimized dimensions and how they were determined (number-line analysis to show that the dimensions result in an optimized solution. (E) Graph of optimization (in terms of volume OR surface area in terms of...
PART A A sample of ideal gas is in a sealed container. The pressure of the...
PART A A sample of ideal gas is in a sealed container. The pressure of the gas is 735 torr , and the temperature is 22 ∘C . If the temperature changes to 76 ∘C with no change in volume or amount of gas, what is the new pressure, P2, of the gas inside the container? Express your answer with the appropriate units. PART B Using the same sample of gas (P1 = 735 torr , T1 = 22 ∘C...
state the steps used to minimize the plate height in column chromatography.
state the steps used to minimize the plate height in column chromatography.
A gas at a pressure of 2.00 atm is contained in a closed container. Indicate the...
A gas at a pressure of 2.00 atm is contained in a closed container. Indicate the changes in its volume when the pressure undergoes the following changes at constant temperature. (Assume that the volume of the container changes with the volume of the gas.) Part A The pressure increases to 8.50 atm . Give your answer as a factor. Vo is the original volume of the gas (container). V1 =
1.sample of a gas is in a sealed container. The pressure of the gas is 345...
1.sample of a gas is in a sealed container. The pressure of the gas is 345 torr , and the temperature is 43 ∘ C . If the temperature changes to 93 ∘ C with no change in volume or amount of gas, what is the new pressure, P 2 , of the gas inside the container? Using the same sample of gas (P1 = 345 torr , T1 = 43 ∘C ), we wish to change the pressure to...
What is the pressure (in millimeters of mercury) inside a container of gas connected to a...
What is the pressure (in millimeters of mercury) inside a container of gas connected to a mercury-filled open-end manometer of the sort shown in Figure 9.4 in the textbook when the level in the arm connected to the container is 18.0 cm lower than the level in the arm open to the atmosphere, and the atmospheric pressure reading outside the apparatus is 765.3 mm Hg ?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT