Question

In: Electrical Engineering

Consider a salient-role generator delivering power through a short transmission line to an infinite bus V∞=1∠0°,...

Consider a salient-role generator delivering power through a short transmission line to an infinite bus V∞=1∠0°, |Ea|=1.5. The active power delivered to the infinite bus is 0.7. We are given the generator reactances Xd=1.6 and Xq=1.0 and the line reactance XL=0.3. Neglect resistances, draw the phasor diagram and find Ea and Ia.

Solutions

Expert Solution


Related Solutions

Consider the classical power system where one generator is connected to the infinite bus through two...
Consider the classical power system where one generator is connected to the infinite bus through two transmission lines. We want to study the transient stability for a fault on one of the two lines. The generator parameters are as follows: Pm = 1, H = 4, KD = 5, x'd = 0.25, E' =1.4. The transmission line where the fault occurs has a line reactance of 0.6 pu. The other transmission line that remains in service has a line reactance...
QUIESTION 1 A three-phase synchronous generator is connected to an infinite bus. The infinite bus voltage...
QUIESTION 1 A three-phase synchronous generator is connected to an infinite bus. The infinite bus voltage and the generated voltage are o 1.0 pu ∠0 and o 1.0pu ∠42.84 , respectively. The synchronous reactance is 0.85 pu and resistances are neglected. a) Compute power angle (δ), armature current (Is), power factor (pf), real power (P), and reactive power (Q). Draw the phasor diagram. b) If the prime mover torque is kept constant at a value corresponding to P=0.8 pu, compute...
A 280-V, 3Ø AC power system, Y-connected three-phase generator connected through a three-phase transmission line to...
A 280-V, 3Ø AC power system, Y-connected three-phase generator connected through a three-phase transmission line to a Y-connected load. The transmission line has an impedance of (0.02+j0.4) Ω/phase, and the load has an impedance of (4+j3) Ω per phase. Determine the;(a)line current (IL) at the load [2Marks] (b)line and phase voltage of the load[2 Marks](c)active power, reactive and apparent power [2 Marks](d) power factor and specify whether it is lagging or leading. [4 Marks]
A 50 Hz synchronous generator is supplying 60% of its maximum power to an infinite bus...
A 50 Hz synchronous generator is supplying 60% of its maximum power to an infinite bus through a reactive network. Due to a certain fault, the reactance of the network between the generator internal voltage and the infinite bus is increased four times. After the fault is cleared, 80% of maximum power can be transferred Sketch the mechanical power vs. power angle curves, in the same figure, under the different operation conditions, and annotate all the key points on the...
A 1000MVA, 20kV, 60 Hz three phase generator is connected to an infinite bus through a...
A 1000MVA, 20kV, 60 Hz three phase generator is connected to an infinite bus through a 1000MVA, 20kV? / 345kVY transformer to a 345kV circuit breaker and a 345kV transmission line. The generator reactances are X``d=0.17, X`d=0.30, and Xd=1.5 per unit on a 1000MVA, 20kV base. Generator time constants are T``d=0.05 seconds, T`d=1.0 seconds, and TA=0.10 seconds. The transformer series reactance is 0.10 per unit on the transformer ratings as a base. Neglect transformer losses, excitation current, and transformer time...
Find the line that passes through the point (0, 1) and through the point of intersection...
Find the line that passes through the point (0, 1) and through the point of intersection of the two lines  and
1). Consider a transmission line made of a conductor with length l, the lines are made...
1). Consider a transmission line made of a conductor with length l, the lines are made of conductor with resistance per unit length R, inductance per unit length L, between the two lines is dielectric material with conductance per unit length Gand capacitance per unit length C. (a) Derive transmission line equations (telegrapher’s equations) for the phasors of the voltage difference and current in the transmission line. Explain the meaning of the spatial coordinate clearly. (b) Write down the general...
1. write the equations of a line through the point (0, 2, -5) and perpendicular to...
1. write the equations of a line through the point (0, 2, -5) and perpendicular to the plane -2x+3y+4z = 18. Use either parametric or symmetric form. 2. Find the acute angle between the planes 2x+4y-z = 12 and x-6y+5z= 20.
1. Consider a free, unbound particle with V (x) = 0 and the initial state wave...
1. Consider a free, unbound particle with V (x) = 0 and the initial state wave function: Ψ(x, 0) = Ae−a|x| a>0 (a) (3 pts) Normalize the initial state wave function. (b) (5 pts) Construct Ψ(x, t). (c) (5 pts) Discuss the limiting cases, i.e. what happens to position and momentum when a is very small and when a is very large?
Calculate the vector equation for the line passing through the points (–1, 0, 2) and (3, 4, 6) is:
Calculate the vector equation for the line passing through the points (–1, 0, 2) and (3, 4, 6).
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT