The air, which has a temperature of 120 ° C, flows over a plate with a...

The air, which has a temperature of 120 ° C, flows over a plate with a length of 1.2 m and a constant temperature of 30 ° C across the surface, and its speed flows at a speed of 2 m / s. According to this,
a.) Calculate the speed and temperature boundary layer thickness at the end of the plate.
b.) Find the local heat transfer coefficient and heat flux at the end of the plate.
c.) Find the average heat transfer coefficient and heat flux at the end of the plate.
(Properties of the air will be taken from the table)

all informations are given

Solutions

Expert Solution

samet mamat answered 8 months ago

Next > < Previous

Related Solutions

Air at 10°C and I atm flows over a flat plate (30 cm x100 cm) at...

Air at 10°C and I atm flows over a flat plate (30 cm x100 cm) at 20 m/s. The plate is maintained at 70°C. (a) calculate the boundary layer thikness at distances of 30 cm and 100 cm, (b) calculate the heat transfer from first 30 cm and from whole the plate.

A thin plate is suspended in air at 1 atm. with T_infinite= 15°C. Air flows on...

A thin plate is suspended in air at 1 atm. with T_infinite= 15°C. Air flows on both sides of the plate where the bottom side absorbs a uniform radiative heat flux of 1542 W/m2. The plate is oriented parallel to the flow and the length along the flow direction is 60 cm. Consider the plate is negligibly thin and the width of the plate (perpendicular to the flow) is large, so that the problem can be considered as a 2D...

A poorly ventilated commercial kitchen contains 120 kg of air at a temperature of 19°C and...

A poorly ventilated commercial kitchen contains 120 kg of air at a temperature of 19°C and and with a relative humidity of 30% at the start of the evening shift. At the end of the shift the temperature in the kitchen is 28°C and water is condensing on the walls and ceilings. What is the minimum amount of water vapour that has been added to the air in the kitchen over the course of the shift? (to 2 s.f and...

Air at 1 atm and 27 degree C flows across a flat plate at a velocity...

Air at 1 atm and 27 degree C flows across a flat plate at a velocity of 14 m/s. Find the distance from the leading edge where transition to turbulent flow begins and the local heat-transfer coefficient at this point if the temperature of the plate is 77 degree C.

how to find surface temperature of the flat plate which is subjected to air flow from...

how to find surface temperature of the flat plate which is subjected to air flow from one side and constant temperature on the other side using Ansys fluent ?

Air flows over a 4 meter long flat plate at a velocity of 8 m/s. Using...

Air flows over a 4 meter long flat plate at a velocity of 8 m/s. Using a spreadsheet, calculate the boundary layer thickness and wall shear stress at 0.1 meter intervals along the plate. Do not plot the wall shear stress at x=0. Use a transition Reynolds number of 5 x 10^5 . (You will need to calculate Rex at each location to determine if the laminar or turbulent correlations should be used.) Generate a spreadsheet table that includes columns...

Air flows through a constant area duct. The pressure and temperature of the air at the...

Air flows through a constant area duct. The pressure and temperature of the air at the inlet to the duct are P1 = 100 kPa absolute, and T1 = 298 K, respectively. Inlet Mach number is M1 = 0.1. Heat is transferred to the air as it flows through the duct and as a result the Mach number at the exit increases. Write a Matlab code and plot the following: a) Find the pressure and temperature at the exit, while...

Air at 15°C flows at 9 m/s parallel to a thin flat plate measuring 260 mm...

Air at 15°C flows at 9 m/s parallel to a thin flat plate measuring 260 mm × 390 mm. The direction of flow is parallel to the 260-mm edges. The surface of the plate is at a uniform temperature of 85°C. The plate is in a large chamber with walls at a temperature of 22°C. The emissivity of the plate’s surfaces is 0·75. (a) Determine the rate of convective heat transfer from one side of the plate to air. [16]...

In a low temperature drying system, air at 60°C and 10% Relative humidity passes over a...

In a low temperature drying system, air at 60°C and 10% Relative humidity passes over a bed of diced carrots at 20 kg-dry air/sec. The rate of water removal from the carrots Is measured by difference in total weight over time and found to be approximately .16 kg-water/sec. In the system described above, calculate the temperature and relative humidity of the air exiting the drying system.

Air at 20°C and a velocity of 8 m/s flows over the 4-m length of a...

Air at 20°C and a velocity of 8 m/s flows over the 4-m length of a 4-m wide single surface of a square plate whose temperature is 80°C. (For properties of air, use k = 0.02735 W/m·K, Pr = 0.7228, ν = 1.798 x 10-5 m2 /s ) Given the above information, do the calculations to answer the two MC questions below. Please clearly show/discuss your solution method and calculations. A. __________The rate of heat transfer, Q̇ , from this...

Subjects