Question

In: Physics

Two capacitors, C1=7500pF and C2=2900pF, are connected in series to a 15.0 V battery. The capacitors...

Two capacitors, C1=7500pF and C2=2900pF, are connected in series to a 15.0 V battery. The capacitors are later disconnected from the battery and connected directly to each other, positive plate to positive plate, and negative plate to negative plate.

What then will be the charge on each capacitor?

Solutions

Expert Solution


Related Solutions

Two capacitors, C1 and C2, are connected in series and a battery, providing a voltage V,...
Two capacitors, C1 and C2, are connected in series and a battery, providing a voltage V, is connected across the two capacitors. (a) Find the equivalent capacitance, the energy stored in this equivalent capacitance, and the energy stored in each capacitor. (b) Show that the sum of the energy stored in each capacitor is the same as the energy stored in the equivalent capacitor. Will this equality always be true, or does it depend on the number of capacitors and...
Two capacitors, C1 = 28.0 µF and C2 = 40.0 µF, are connected in series, and a 21.0 V battery...
Two capacitors, C1 = 28.0 µF and C2 = 40.0 µF, are connected in series, and a 21.0 V battery is connected across them.(a) Find the equivalent capacitance, and the energy contained in this equivalent capacitor.equivalent capacitance = ?total energy stored = ?(b) Find the energy stored in each individual capacitor.energy stored in C1 = ?energy stored in C2 = ?Show that the sum of these two energies is the same as the energy found in part (a). Will this...
Capacitor C1 = 10.0 micro F is connected in series to parallel combination of capacitors C2=7.0...
Capacitor C1 = 10.0 micro F is connected in series to parallel combination of capacitors C2=7.0 microF and C3=7.5 microF. This circuit is connected to a battery delivering V=13.0 V. Find energy stored in capacitor C3 in microJ.
Two capacitors C1 = 2 µF and C2 = 6 µF are connected in parallel across...
Two capacitors C1 = 2 µF and C2 = 6 µF are connected in parallel across a 11 V battery. They are carefully disconnected so that they are not discharged and are reconnected to each other with positive plate to negative plate and negative plate to positive plate (with no battery). (a) Find the potential difference across each capacitor after they are connected. V (2 µF capacitor) . V (6 µF capacitor) (b) Find the initial and final energy stored...
Two separate capacitors, C1 and C2 C1 = 36 micro-Coulomb on 3 micro-Farad C2 = 72...
Two separate capacitors, C1 and C2 C1 = 36 micro-Coulomb on 3 micro-Farad C2 = 72 uC on X 2uF, , if zero 1 C2 had a gap of 0.2m maintained by a compressed plastic spring inside the gap, the natural spring length was 0.5m, the compressed spring length was 0.2 m. Spring constant = 8,000 micro-Newton/ meter Action: Connected the two capacitors in parallel Part A Find Q2-new, C2-new, new gap, Hint: Capacitance has geometry parameters, build an equation...
Two separate capacitors, C1 and C2 C1 = 36 micro-Coulomb on 3 micro-Farad C2 = 72...
Two separate capacitors, C1 and C2 C1 = 36 micro-Coulomb on 3 micro-Farad C2 = 72 uC on 5 uF C2 had a gap of 0.2m maintained by a compressed plastic spring inside the gap, the natural spring length was 0.5m, the compressed spring length was 0.2 m. Spring constant = 8,000 micro-Newton/ meter Action: Connected the two capacitors in parallel Part A Find Q2-new, C2-new, new gap, Part B Find the initial total energy, the final total energy -use...
The figure shows a 11.8 V battery and four uncharged capacitors of capacitances C1 = 1.16...
The figure shows a 11.8 V battery and four uncharged capacitors of capacitances C1 = 1.16 μF,C2 = 2.31 μF,C3 = 3.26 μF, and C4 = 4.19 μF. If only switch S1 is closed, what is the charge on (a) capacitor 1, (b) capacitor 2, (c) capacitor 3, and (d) capacitor 4? If both switches are closed, what is the charge on (e) capacitor 1, (f) capacitor 2, (g) capacitor 3, and (h) capacitor 4?
A 0.50-μF and a 1.4-μF capacitor (C1 and C2, respectively) are connected in series to a...
A 0.50-μF and a 1.4-μF capacitor (C1 and C2, respectively) are connected in series to a 22-V battery. Part A: Calculate the potential difference across each capacitor. Part B: Calculate the charge on each capacitor. Part C: Calculate the potential difference across each capacitor assuming the two capacitors are in parallel. Part D: Calculate the charge on each capacitor assuming the two capacitors are in parallel.
A 0.50-?F and a 1.4-?F capacitor (C1 and C2, respectively) are connected in series to a...
A 0.50-?F and a 1.4-?F capacitor (C1 and C2, respectively) are connected in series to a 15-V battery. Part A. Calculate the potential difference across each capacitor. Express your answers using two significant figures separated by a comma. Part B. Calculate the charge on each capasitor. Express your answers using two significant figures separated by a comma. Part C. Calculate the potential difference across each capacitor assuming the two capacitors are in parallel. Express your answers using two significant figures...
A 24.0-V battery is connected in series with a resistor and an inductor, with R =...
A 24.0-V battery is connected in series with a resistor and an inductor, with R = 4.60 Ω and L = 7.00 H, respectively. (a) Find the energy stored in the inductor when the current reaches its maximum value. ________J (b) Find the energy stored in the inductor at an instant that is a time interval of one time constant after the switch is closed. ________J
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT