Question

In: Physics

Two separate capacitors, C1 and C2 C1 = 36 micro-Coulomb on 3 micro-Farad C2 = 72...

Two separate capacitors, C1 and C2

C1 = 36 micro-Coulomb on 3 micro-Farad

C2 = 72 uC on 5 uF

C2 had a gap of 0.2m maintained by a compressed plastic spring inside the gap, the natural spring length was 0.5m, the compressed spring length was 0.2 m. Spring constant = 8,000 micro-Newton/ meter Action: Connected the two capacitors in parallel

Part A Find Q2-new, C2-new, new gap,

Part B Find the initial total energy, the final total energy

-use the energy formulas

Solutions

Expert Solution

#Hi, I am providing you the detailed solution for the question you have asked. I hope you will appreciate and understand this. ...

if you are happy and find this useful please thumbs up. In case, if you have any query regarding the solution please let me know in the comments section below. We can discuss. Thanks!!


Related Solutions

Two separate capacitors, C1 and C2 C1 = 36 micro-Coulomb on 3 micro-Farad C2 = 72...
Two separate capacitors, C1 and C2 C1 = 36 micro-Coulomb on 3 micro-Farad C2 = 72 uC on X 2uF, , if zero 1 C2 had a gap of 0.2m maintained by a compressed plastic spring inside the gap, the natural spring length was 0.5m, the compressed spring length was 0.2 m. Spring constant = 8,000 micro-Newton/ meter Action: Connected the two capacitors in parallel Part A Find Q2-new, C2-new, new gap, Hint: Capacitance has geometry parameters, build an equation...
5) Three capacitors, all initially without any dielectrics inserted, of C1 = 3 micro-farads, C2 =...
5) Three capacitors, all initially without any dielectrics inserted, of C1 = 3 micro-farads, C2 = 7 micro-farads, and C3 = 15 micro-farads, are connected purely in series to a battery and the total stored energy of all three capacitors is 203 micro-joules. Then, the plates of C1 are brought closer by a factor of 2 and a dielectric with a dielectric constant of 1.7 is inserted into C2 while still connected in series to the same battery. (C3 does...
Capacitor C1 = 10.0 micro F is connected in series to parallel combination of capacitors C2=7.0...
Capacitor C1 = 10.0 micro F is connected in series to parallel combination of capacitors C2=7.0 microF and C3=7.5 microF. This circuit is connected to a battery delivering V=13.0 V. Find energy stored in capacitor C3 in microJ.
Two capacitors, C1=7500pF and C2=2900pF, are connected in series to a 15.0 V battery. The capacitors...
Two capacitors, C1=7500pF and C2=2900pF, are connected in series to a 15.0 V battery. The capacitors are later disconnected from the battery and connected directly to each other, positive plate to positive plate, and negative plate to negative plate. What then will be the charge on each capacitor?
Three capacitors, all initially without any dielectrics inserted, of C1 = 4 micro-farads, C2 = 10...
Three capacitors, all initially without any dielectrics inserted, of C1 = 4 micro-farads, C2 = 10 micro-farads, and C3 = 10 micro-farads, are connected purely in series to a battery and the total stored energy of all three capacitors is 248 micro-joules. Then, the plates of C1 are brought closer by a factor of 3 and a dielectric with a dielectric constant of 1.9 is inserted into C2 while still connected in series to the same battery. (C3 does not...
Two capacitors, C1 and C2, are connected in series and a battery, providing a voltage V,...
Two capacitors, C1 and C2, are connected in series and a battery, providing a voltage V, is connected across the two capacitors. (a) Find the equivalent capacitance, the energy stored in this equivalent capacitance, and the energy stored in each capacitor. (b) Show that the sum of the energy stored in each capacitor is the same as the energy stored in the equivalent capacitor. Will this equality always be true, or does it depend on the number of capacitors and...
Two capacitors C1 = 6.8 μF, C2 = 14.6 μF are charged individually to V1 =...
Two capacitors C1 = 6.8 μF, C2 = 14.6 μF are charged individually to V1 = 19.6 V, V2 = 3.5 V. The two capacitors are then connected together in parallel with the positive plates together and the negative plates together.Calculate the amount of charge (absolute value) that flows from one capacitor to the other when the capacitors are connected together. By how much (absolute value) is the total stored energy reduced when the two capacitors are connected? The final...
Two capacitors C1 = 2 µF and C2 = 6 µF are connected in parallel across...
Two capacitors C1 = 2 µF and C2 = 6 µF are connected in parallel across a 11 V battery. They are carefully disconnected so that they are not discharged and are reconnected to each other with positive plate to negative plate and negative plate to positive plate (with no battery). (a) Find the potential difference across each capacitor after they are connected. V (2 µF capacitor) . V (6 µF capacitor) (b) Find the initial and final energy stored...
Two capacitors C1 = 5.1 ?F, C2 = 19.8 ?F are charged individually to V1 =...
Two capacitors C1 = 5.1 ?F, C2 = 19.8 ?F are charged individually to V1 = 14.9 V, V2 = 3.4 V. The two capacitors are then connected together in parallel with the positive plates together and the negative plates together. Calculate the final potential difference across the plates of the capacitors once they are connected. C) By how much (absolute value) is the total stored energy reduced when the two capacitors are connected? Part a is 5.76V Part b...
Two capacitors, C1 = 28.0 µF and C2 = 40.0 µF, are connected in series, and a 21.0 V battery...
Two capacitors, C1 = 28.0 µF and C2 = 40.0 µF, are connected in series, and a 21.0 V battery is connected across them.(a) Find the equivalent capacitance, and the energy contained in this equivalent capacitor.equivalent capacitance = ?total energy stored = ?(b) Find the energy stored in each individual capacitor.energy stored in C1 = ?energy stored in C2 = ?Show that the sum of these two energies is the same as the energy found in part (a). Will this...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT