Question
In: Mechanical Engineering
Air enters a nozzle steadily at P1=650kPa and T1=125°C at a velocity of 12m/s and leaves...
Air enters a nozzle steadily at P1=650kPa and T1=125°C at a velocity of 12m/s and leaves at 150m/s with a pressure of P2=110 kPa and temperature of T2=78°C. If the inlet are of the nozzle is 85cm^2, determine (a) Mass flow rate of air in the nozzle and (b) Exit diameter of nozzle.
Solutions
samet mamat answered 2 years agoRelated Solutions
Air enters a nozzle steadily at 280 kPa and 77°C with a velocity of 70 m/s...
Air enters a nozzle steadily at 280 kPa and 77°C with a velocity
of 70 m/s and exits at 85 kPa and 320 m/s. The heat losses from the
nozzle to the surrounding medium at 20°C are estimated to be 3.2
kJ/kg.
The table for the ideal-gas properties of air is given
below.
Determine the exit temperature. (Round the final answer to one
decimal).
The exit temperature is ______K
Determine the total entropy change for this process. (Round the
final...
1. Air enters a steady-state diffuser at T1 = 20 °C, P1 = 100 kPa and...
1. Air enters a steady-state diffuser at T1 = 20 °C, P1 = 100
kPa
and leaves at P2 = 105 kPa. You may assume an adiabatic
diffuser and constant specific heats. Find T2 if:
a) V1 = 10 m/s, V2 = 0 m/s
b) V1 = 100 m/s, V2 = 90 m/s
c) V1 = 500 m/s, V2 = 490 m/s
d) V1 = 1000 m/s, V2 = 990 m/s
Air enters the compressor of a simple gas turbine at p1 = 14 lbf/in2, T1 =...
Air enters the compressor of a simple gas turbine at
p1 = 14 lbf/in2, T1 = 520°R. The
isentropic efficiencies of the compressor and turbine are 83 and
87%, respectively. The compressor pressure ratio is 16 and the
temperature at the turbine inlet is 2500°R. The volumetric flow
rate of the air entering the compressor is 9000 ft3/min.
Use an air-standard analysis.
Determine all temperatures at each state.
A) Determine the net power developed, in Btu/h.
B) Determine the thermal...
Air enters the compressor of a simple gas turbine at p1 = 14 lbf/in2, T1 =...
Air enters the compressor of a simple gas turbine at p1 = 14
lbf/in2, T1 = 520°R. The isentropic efficiencies of the compressor
and turbine are 83 and 87%, respectively. The compressor pressure
ratio is 16 and the temperature at the turbine inlet is 2500°R. The
volumetric flow rate of the air entering the compressor is 9000
ft3/min. Use an air-standard analysis.
Determine the net power developed, in Btu/h.
Air enters the compressor of a simple gas turbine at p1 = 14 lbf/in2, T1 =...
Air enters the compressor of a simple gas turbine at p1 = 14
lbf/in2, T1 = 520°R. The isentropic efficiencies of the compressor
and turbine are 83 and 87%, respectively. The compressor pressure
ratio is 16 and the temperature at the turbine inlet is 2500°R. The
volumetric flow rate of the air entering the compressor is 9000
ft3/min. Use an air-standard analysis.
Determine the net power developed, in Btu/h.
Refrigerant 134a enters a well-insulated nozzle at 14 bar, 60°C, with a velocity of 37 m/s...
Refrigerant 134a enters a well-insulated nozzle at 14 bar, 60°C,
with a
velocity of 37 m/s and exits at 1.2 bar with a velocity of 460 m/s.
For steady-state
operation, and neglecting potential energy effects, determine the
exit
temperature, in °C.
1.Steam is accelerated by a nozzle steadily from a low velocity to a velocity of 210...
1.Steam is accelerated by a nozzle steadily from a low velocity
to a velocity of 210 m/s at a rate of 3.2 kg/s. If the temperature
and pressure of the steam at the nozzle exit are 400 °C and 2 MPa,
the exit area of the nozzle is:
Select one:
a. 8.4 cm2
b. 10.2 cm2
c. 23.0 cm2
d. 152 cm2
e. 24.0 cm2
2.An adiabatic heat exchanger is used to heat cold water at 15
°C entering at a...
1- Steam enters a nozzle at 500 °C and 1000 kPa with a velocity of 15...
1-
Steam enters a nozzle at 500 °C and 1000 kPa with a velocity of 15
m/s. It leaves the nozzle at 200 °C and 300 kPa while losing heat
at a rate of 30 kW. For an inlet area of 700 cm2, determine the
velocity of the steam at the nozzle exit.?
Steam enters an adiabatic turbine steadily at 3 MPa and 400°C and leaves at 50 kPa....
Steam enters an adiabatic turbine steadily at 3 MPa and
400°C and leaves at 50 kPa. If the isentropic efficiency of the
turbine is 66.7%, determine the actual temperature of steam at
turbine exit. The mass flow rate of the steam flowing through the
turbine is 218 kg/min, determine the power output from the turbine.
Plot the T-s diagram.
Moist air enters an air-conditioning system as shown in the figure below at T1 = 28°C,...
Moist air enters an air-conditioning system as shown in the
figure below at T1 = 28°C,
?1 = 85% and a volumetric flow rate of
(AV)1 = 0.89 m3/s. At the exit of
the dehumidifying section, the air is saturated,
?2 = 100%, and the condensate leaves this
section at the same temperature as the moist air. At the exit of
the heating section the moist air is at T3 =
24°C, ?3 = 50%. The system operates at steady...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Write a version of the binary search algorithm that can be used to search a string...
- Using the following reduction potentials: I2(s) + 2e- <---> 2I-(aq) E0 = 0.535 V I2 (aq)...
- Why are learnability and critical thinking crucial skills for the 21stcentury? And, how can you improve...
- Hudson Corporation is considering three options for managing its data warehouse: continuing with its own staff,...
- LUVE produces bracelets. Each band generates $460 in revenue and requires one ounce of gold as...
- (The following data apply to the next three questions.) Assume the following cost and revenue data...
- C# programming Create a classes called AlphabetDice that simulates a multi-sided dices with alphabet characters on...
ADVERTISEMENT