Moist air enters an air-conditioning system as shown in the figure below at T1 = 28°C,...

Moist air enters an air-conditioning system as shown in the figure below at T₁ = 28°C, ?₁ = 85% and a volumetric flow rate of (AV)₁ = 0.89 m³/s. At the exit of the dehumidifying section, the air is saturated, ?₂ = 100%, and the condensate leaves this section at the same temperature as the moist air. At the exit of the heating section the moist air is at T₃ = 24°C, ?₃ = 50%. The system operates at steady state, the pressure is 1 bar at all locations, and kinetic and potential energy effects are negligible.

Determine the heat transfer rate for the dehumidifying section, in kw

Expert Solution

samet mamat answered 2 years ago

Moist air enters an adiabatic humidifier system at 1 atm, 15 °C, with a relative humidity...

Moist air enters an adiabatic humidifier system at 1 atm, 15 °C, with a relative humidity of 20%. The volumetric flow rate of the incoming moist air is 150 m3/min. Saturated water vapor at 1 atm is injected into the flow such that the outlet temperature is 30 °C and the outlet relative humidity is 40%. The pressure is constant in the humidifier system. Determine the mass flow rate of the saturated water vapor entering the humidifier at state 3,...

Air (cp = 1.0 kJ/kgK) enters an air conditioning system at 40C with a mass flow...

Air (cp = 1.0 kJ/kgK) enters an air conditioning system at 40C with a mass flow rate of 1.5 kg/s. The air is cooled by exchanging heat with a stream of R-134a refrigerant that enters the heat exchanger at -8C and 20% quality, and exits with 100% quality. If 25 kW of heat is transferred out of the air, determine: (40 pts) i) Mass flowrate of R-134a (kg/hr) ii) Exit temperature of air (C) iii) Exit pressure of R-134a (kPa)

Moist air initially at T1 = 140°C, p1 = 4 bar, and relitive humidity = 74%...

Moist air initially at T1 = 140°C, p1 = 4 bar, and relitive humidity = 74% is contained in a 2.0-m3 closed, rigid tank. The tank contents are cooled to T2 = 35°C. Determine the temperature at which condensation begins, in °C

Moist air (RH = 60%) at 80oF enters an Evaporative cooling unit as it enters a...

Moist air (RH = 60%) at 80oF enters an Evaporative cooling unit as it enters a greenhouse and leaves at 100% saturation. How many pounds Water per pound of Air will be required? Select one: a. 0.0155 lbs H2O per lb Air b. 0.002865 lbs H2O per lb Air c. 0.028656 lbs H2O per lb Air d. 0.01315 lbs H2O per lb Air e. 0.002344 lbs H2O per lb Air

Moist air at 30 °C and 50% relative humidity enters a dehumidifier operating at steady state...

Moist air at 30 °C and 50% relative humidity enters a dehumidifier operating at steady state with a mass flow rate of 319.35 kg/min. The moist air passes over a cooling coil and water vapor condenses. Condensate (condensed water) exits at 10 °C. Saturated moist air exits in a separate stream at the same temperature. The pressure remains constant at 1 bar. Determine (a) the rate at which water is condensed, in kg/min, and (b) the heat transfer rate during...

In an air conditioning system, the inside and outside conditions of air are 25 °C DBT...

In an air conditioning system, the inside and outside conditions of air are 25 °C DBT and 50% RH, and 40 °C DBT and 27 °C WBT, respectively. The room sensible heat ratio is 0.8, while 50% of the room air is rejected to atmosphere and replaced with an equal quantity of fresh air before entering the air conditioning apparatus. If the fresh air added is 100 m3 /min and the air density is 1.2 kg/ m3 with zero air...

1. Air enters a steady-state diffuser at T1 = 20 °C, P1 = 100 kPa and...

1. Air enters a steady-state diffuser at T1 = 20 °C, P1 = 100 kPa and leaves at P2 = 105 kPa. You may assume an adiabatic diffuser and constant specific heats. Find T2 if: a) V1 = 10 m/s, V2 = 0 m/s b) V1 = 100 m/s, V2 = 90 m/s c) V1 = 500 m/s, V2 = 490 m/s d) V1 = 1000 m/s, V2 = 990 m/s

Consider the system of capacitors shown in the figure below

Consider the system of capacitors shown in the figure below (C1 = 4.00 μF,C2 = 2.00 μF). (a) Find the equivalent capacitance of the system. (b) Find the charge on each capacitor. (c) Find the potential difference across each capacitor (d) Find the total energy stored by the group.

For the system of capacitors shown in the the figure below(Figure 1) , a potential difference...

For the system of capacitors shown in the figure below(Figure 1), a potential difference of 25.0V is maintained across ab.Part (a): What is the equivalent capacitance of this system between a and b in nF?Part (b): How much charge is stored by this system in nC?Part (c): How much charge does the 6.50 nF capacitor store in nC?Part (d): What is the potential difference across the 7.50 nF capacitor in V?

Air enters a nozzle steadily at P1=650kPa and T1=125°C at a velocity of 12m/s and leaves...

Air enters a nozzle steadily at P1=650kPa and T1=125°C at a velocity of 12m/s and leaves at 150m/s with a pressure of P2=110 kPa and temperature of T2=78°C. If the inlet are of the nozzle is 85cm^2, determine (a) Mass flow rate of air in the nozzle and (b) Exit diameter of nozzle.

Question