a tapered surface is to be turned on an automatic lathe the work piece is 750...

a tapered surface is to be turned on an automatic lathe the work piece is 750 mm long with minimum and maximum diameter of 100 & 200 mm at opposite ends the automatic controls on the lathe permit to surface speed to

be maintained at a constant value of 200 m/min by

adj Listing the rotational speed as a function of workpiece
diameter. Feed = 0. 25 mm/rev and depth of cut · 3. 0 m.
The rough geometry of the piece has already been formed,
and this operation will be the final cut. Determine (a) the

time required to turn the taper and (b) the rotational speeds
at the beginning and end of the cut.

Expert Solution

a little bit mistake in the question, depth of cut is given 3.0m but it is actually 3.0mm.

samet mamat answered 2 years ago

6) A tapered surface is to be turned on an automatic lathe. The work piece is...

6) A tapered surface is to be turned on an automatic lathe. The work piece is 900 mm long with minimum and maximum diameters of 150 mm and 300 mm at opposite ends. The automatic controls on the lathe permit the surface speed to be maintained at a constant value of 200 m/min by adjusting the rotational speed as a function of work piece diameter. Feed=0.25 mm/rev and depth of cut = 3.5 mm. The rough geometry of the piece...

A Magnesium Alloy bar 6 in. in diameter is being turned on a lathe at a...

A Magnesium Alloy bar 6 in. in diameter is being turned on a lathe at a depth of cut d = 0.050 in. The lathe is equipped with a 10-hp electric motor and has a mechanical efficiency of 80%. The spindle speed is 500 rpm. Estimate the maximum feed that can be used before the lathe begins to stall. (0.45 W-s/mm^3 value of specific power for magnesium alloy)

Automobiles and trucks are often designed with a tapered ("aerodynamic") rather than a blunt front surface....

Automobiles and trucks are often designed with a tapered ("aerodynamic") rather than a blunt front surface. Why is this? What does the tapered front accomplish? How important is it?

Garrett Boone, Ayayai Enterprises’ vice president of operations, needs to replace an automatic lathe on the...

Garrett Boone, Ayayai Enterprises’ vice president of operations, needs to replace an automatic lathe on the production line. The model he is considering has a sales price of $395,900 and will last for 12 years. It will have no salvage value at the end of its useful life. Garrett estimates the new lathe will reduce raw materials scrap by $42,500 per year. He also believes the lathe will reduce energy costs by $23,500 per year. If he purchases the new...

You have just turned 20 and decided to begin saving $750 quarterly for your retirement. If...

You have just turned 20 and decided to begin saving $750 quarterly for your retirement. If you average 9.0% annual return on your account, how much will you have accumulated when you retire at age 65? (round to nearest penny)

An experiment is planned where an automatic lab would be sent to the surface of Saturn....

An experiment is planned where an automatic lab would be sent to the surface of Saturn. If there was life in Saturn, the probability that the lab detects it and correctly reports the finding is 0.5. If there never was life on Saturn, the probability that the lab will erroneously indicate the presence of life is 0.45. Suppose that a fair assessment of the probability that life was ever present on Saturn is 0.1. (a) Find the probability that the...

Hi, can you please solve this? A machine that produces a certain piece must be turned...

Hi, can you please solve this? A machine that produces a certain piece must be turned off by the operator after each piece is completed. The machine "coasts" for 15 seconds after it is turned off, thus preventing the operator from removing the piece quickly before producing the next piece. An engineer has suggested installing a brake that would reduce the coasting time to 3 seconds. The machine produces 50,000 pieces a year. The time to produce one piece is...

The 4M company has a work center with a single turret lathe. Jobs arrive at this...

The 4M company has a work center with a single turret lathe. Jobs arrive at this work center according to a Poisson process at a mean rate of 2 jobs per day, The lathe processing time has an exponential distribution with a mean of 0.25 day per job. a) On average, how many jobs are waiting.in the work center? b) On average, how long will a job stay in the center? c).Since each job takes a big space, the waiting...

1. Light of wavelength 620nm in air is incident on a surface of a flat piece...

1. Light of wavelength 620nm in air is incident on a surface of a flat piece of glass with an index of refraction of 1.50 with an angle of incidence of 30°. a.What is the angle of refraction? -Answer: 19.5° b. Find the wavelength and frequency of light in glass. Answer: 413nm, 4.84x1014Hz c.Explain under what circumstances “total internal reflection” can be observed at the boundary between air and this piece of glass. Be as specific as possible.

Use MS Excel and turn in your XLS document. This work is to be turned in...

Use MS Excel and turn in your XLS document. This work is to be turned in individually. Compute the present value of a project that has a lifetime of 7 years. The total investment is 1.5 million dollars. The depreciation method is MACRS-GDS classified as 5 year property. The tax rate is 21%. 43% of the investment is financed with a loan at 7% per year, payable in 5 yearly payments. The positive cash flows in each one of the...

Question