Question

In: Mechanical Engineering

An adiabatic steam power plant turbine receives 500kg/s in steady flow at 8MPa and 500 degrees...

An adiabatic steam power plant turbine receives 500kg/s in steady flow at 8MPa and 500 degrees C(state 1), the steam exits at 15kPa with quality of 0.95(state 2 actual). Find a) isentropic power output of the turbine using listed pressures, b) actual power output of the turbine, c) isentropic efficiency of the turbine, d) s2-s1

Solutions

Expert Solution


Related Solutions

An adiabatic steam power plant turbine receives 500kg/s in steady flow at 8MPa and 500 degrees...
An adiabatic steam power plant turbine receives 500kg/s in steady flow at 8MPa and 500 degrees C(state 1), the steam exits at 15kPa with quality of 0.95(state 2 actual). Find a) isentropic power output of the turbine using listed pressures, b) actual power output of the turbine, c) isentropic efficiency of the turbine, d) s2-s1
An adiabatic steam turbine receives 50 kg/s of superheated steam at 5 MPa and 500oC. Steam...
An adiabatic steam turbine receives 50 kg/s of superheated steam at 5 MPa and 500oC. Steam exits the turbine with a pressure of 100 kPa. Determine the minimum exit quality and the maximum power output of the turbine in kW.
A mass flow rate of 2 kg/s of steam is expanded in an adiabatic turbine with...
A mass flow rate of 2 kg/s of steam is expanded in an adiabatic turbine with an isentropic efficiency of 0.92. The steam enters at 3 MPa and 400 C and leaves at 30 kPa. Determine how much power the turbine is producing. Express your result in kW. (Sol: 1649 kW)
Steam enters an adiabatic turbine at 500C and 4.0MPa and 80m/s. The steam leaves the turbine...
Steam enters an adiabatic turbine at 500C and 4.0MPa and 80m/s. The steam leaves the turbine as saturated liquid-vapor mixture at 30kPa, quality of 92% and 50m/s. The mass flow rate of steam through the turbine is 12kg/s. (10 pts) Determine change in kinetic energy (10 pts) Determine the rate of work (power) done by the steam in the turbine, in kW (neglect potential energy change). (10 pts) Determine the flow area at the entrance to the turbine, in m2....
A steam turbine receives superheated steam at 18.0 kg/s, 500.°C, and 3.00 MPa and exhausts it...
A steam turbine receives superheated steam at 18.0 kg/s, 500.°C, and 3.00 MPa and exhausts it to 10 kPa with a quality of 96%. If the turbine is assumed to be internally reversible, determine the rate of heat loss from the turbine surface if the power output is 20.MW The surface temperature of the turbine is uniform at 350.°C, and the local environment (ground state) is taken to be saturated liquid water at T0 = 20.0°C. Neglect all flow stream...
Steam turbine power plant practical report
Steam turbine power plant practical report
Steam at 5mpa and 300C enters a turbine in a steady flow manner, from the turbine...
Steam at 5mpa and 300C enters a turbine in a steady flow manner, from the turbine the steam expands to 200 kpa with a quality of 90%. FInd the ff: a. The work done by the steam to the turbine in kj/kg b. The amount of steam flow rate needed in kg/hr if the turbine produces 200kW of power c. The efficiency of the expansion process
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa,...
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa, 700°C and the other flow is 15 kg/s at 800 kPa, 500°C. The exit state is 10 kPa, with a quality of 96%. Calculate the efficiency of the turbine and the total power output.
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa,...
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa, 700°C and the other flow is 15 kg/s at 800 kPa, 500°C. The exit state is 10 kPa, with a quality of 96%. Find the total power out of the adiabatic turbine. Calculate the efficiency of the turbine
Steam at 5MPa and 300°C enters a turbine in a steady flow manner, from the turbine...
Steam at 5MPa and 300°C enters a turbine in a steady flow manner, from the turbine the steam expands to 200kPa with a quality of 90%. Find the following: The work done by the steam to the turbine in kj/kg The amount of steam flow rate needed in kg/hr if the turbine produces 200kW of power The efficiency of the expansion process
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT