Question

In: Mechanical Engineering

Problem 6.082 SI Steam undergoes an isentropic compression in an insulated piston–cylinder assembly from an initial...

Problem 6.082 SI

Steam undergoes an isentropic compression in an insulated piston–cylinder assembly from an initial state where T1 = 120°C, p1 = 1 bar to a final state where the pressure p2 = 50 bar.


Determine the final temperature, in °C, and the work, in kJ per kg of steam.

Solutions

Expert Solution


Related Solutions

Steam undergoes an isentropic compression in an insulated piston–cylinder assembly from an initial state where T1...
Steam undergoes an isentropic compression in an insulated piston–cylinder assembly from an initial state where T1 = 120°C, p1 = 1 bar to a final state where the pressure p2 = 30 bar. Determine the final temperature, in °C, and the work, in kJ per kg of steam.
A piston cylinder device with air is going through an isentropic compression. The initial pressure is...
A piston cylinder device with air is going through an isentropic compression. The initial pressure is 0.1 MPa and temperature is 300 K. During the isentropic compression process, the volume is decreased to 1/18 of the initial volume. Using variable specific heats, determine the pressure and temperature at the end of the compression process. What is the amount of work consumed?
A gas in a piston–cylinder assembly undergoes a compression process for which the relation between pressure...
A gas in a piston–cylinder assembly undergoes a compression process for which the relation between pressure and volume is given by pVn = constant. The initial volume is 0.2 m3, the final volume is 0.04 m3, and the final pressure is 2 bar. For n = 1.3, determine the initial pressure, in bar, and the work for the process, in kJ.
Steam, initially at 700 lbf/in.2, 550°F undergoes a polytropic process in a piston–cylinder assembly to a...
Steam, initially at 700 lbf/in.2, 550°F undergoes a polytropic process in a piston–cylinder assembly to a final pressure of 2200 lbf/in.2 Kinetic and potential energy effects are negligible. Determine the heat transfer, in Btu per lb of steam, for a polytropic exponent of 1.4, (a) using data from the steam tables. (b) assuming ideal gas behavior.
A piston–cylinder device contains steam that undergoes a reversible thermodynamic cycle. Initially the steam is at...
A piston–cylinder device contains steam that undergoes a reversible thermodynamic cycle. Initially the steam is at 400 kPa and 350oC with a volume of 0.3 m3. The steam is first expanded isothermally to 150 kPa, then compressed adiabatically to the initial pressure, and finally compressed at the constant pressure to the initial state. Determine (a) the net work and heat transfer for the cycle after you calculate the work and heat interaction for each process and (b) show the cyclic...
Air undergoes a polytropic process in a piston–cylinder assembly from p1 = 1 bar, T1 =...
Air undergoes a polytropic process in a piston–cylinder assembly from p1 = 1 bar, T1 = 295 K to p2 = 7 bar. The air is modeled as an ideal gas and kinetic and potential energy effects are negligible. For a polytropic exponent of 1.4, determine the work and heat transfer, each in kJ per kg of air, (1) assuming constant cv evaluated at 300 K. (2) assuming variable specific heats.
Air undergoes a polytropic process in a piston–cylinder assembly from p1 = 1 bar, T1 =...
Air undergoes a polytropic process in a piston–cylinder assembly from p1 = 1 bar, T1 = 295 K to p2 = 3 bar. The air is modeled as an ideal gas and kinetic and potential energy effects are negligible. For a polytropic exponent of 1.2, determine the work and heat transfer, each in kJ per kg of air, (1) assuming constant cv evaluated at 300 K. (2) assuming variable specific heats.
Air undergoes a polytropic process in a piston–cylinder assembly from p1 = 1 bar, T1 =...
Air undergoes a polytropic process in a piston–cylinder assembly from p1 = 1 bar, T1 = 295 K to p2 = 3 bar. The air is modeled as an ideal gas and kinetic and potential energy effects are negligible. For a polytropic exponent of 1.6, determine the work and heat transfer, each in kJ per kg of air, (1) assuming constant cv evaluated at 300 K. (2) assuming variable specific heats.
A 10 kg steam initially at 2 MPa saturated vapor is inside an insulated piston cylinder....
A 10 kg steam initially at 2 MPa saturated vapor is inside an insulated piston cylinder. The cylinder has a bottom valve. As this valve opens, steam at 800 kPa and 200C exits while the steam inside the tank has 400kPa saturated vapor. Find the exit mass of steam from the cylinder in kg.
Four kilograms of steam in a piston/cylinder device at 400 kPa and 175 °C undergoes isothermal...
Four kilograms of steam in a piston/cylinder device at 400 kPa and 175 °C undergoes isothermal and mechanically reversible process to a final pressure such that the steam is completely condensed (i.e., became a saturated liquid). Determine Q and W for this process: (b) Using generalized correlations and Equations (6.70 – 6.74). Comment on the accuracy of your answer. [Answer: Q = -9,461 kJ, W = 1494.9 kJ]
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT