Question
In: Mechanical Engineering
b. Conduct an analysis for a gas turbine combustor using Propane, C3H8, you can assume the...
b. Conduct an analysis for a gas turbine combustor using Propane, C3H8, you can assume the product outlet temperature is 1500 K and the air inlet temperature is 650 K on a standard day (25 C) and the fuel enters at ambient temperature.
Solutions
samet mamat answered 2 years agoRelated Solutions
a. Conduct an analysis for a gas turbine combustor using Propane, C3H8, you can assume the...
a. Conduct an analysis for a gas turbine combustor using
Propane, C3H8, you can assume the product outlet temperature is
1500 K and the air inlet temperature is 650 K on a standard day (25
C) and the fuel enters at ambient temperature.
A 16.0 gram sample of propane gas (C3H8) is burned according to the equation C3H8(g) +...
A 16.0 gram sample of propane gas
(C3H8) is burned according to the equation
C3H8(g) + 5O2(g) →
3CO2(g) + 4H2O(g).
In an enclosed container with a volume of 2.25L at a
temperature of 322K.
If the sample of propane burns completely and no oxygen
remains in the container, calculate the mole fractions of
CO2 and H2O.
Calculate the total pressure in the container after the
reaction.
Calculate the partial pressure of CO2 and
H2O in the container after the...
What is the mass of propane, C3H8, in a 50.0 L container of the gas at...
What is the mass of propane, C3H8, in a 50.0 L container of the
gas at STP?
A sample of propane gas (C3H8) having volume of 1.80L at 25oC and 1.65atm was mixed...
A sample of propane gas (C3H8) having volume of 1.80L at 25oC
and 1.65atm was mixed with a sample of oxygen gas having a volume
of 35.0L at 31oC and 1.25atm. The mixture was ignited to form
carbon dioxide and water. Write the balanced reaction. What is the
limiting reagent? What is the maximum number of grams of water
which can form from this reaction? Find the number of moles of
excess reactant at STP.
A petroleum gas mixture containing 65% propane (C3H8) and 35% propylene (C3H6) is burned with 40%...
A petroleum gas mixture containing 65% propane (C3H8) and 35%
propylene (C3H6) is burned with 40% excess air. The flow rate of
the gas mixture is 200 mol/h. All of the propylene and 90% of the
propane are consumed. No CO is found in the product. Write the
chemical reactions. How much air is added to the reactor (molar
flow rate)? What is the molar flow rate of the outlet gas?
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8)
and 15% butene (C4H8) by volume. It is to be fed to the combustion
chamber in 10% excess air at 25ºC, where it is completely burnt to
carbon dioxide and water. The flue gases produced are to be used to
generate 5 bar steam from water at 90ºC.
(a) Determine the maximum flame temperature.
(b) If 5% of the heat available for steam production is lost to
the atmosphere,...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8)
and 15% butene (C4H8) by volume. It is to be fed to the combustion
chamber in 10% excess air at 25ºC, where it is completely burnt to
carbon dioxide and water. The flue gases produced are to be used to
generate 5 bar steam from water at 90ºC. With the aid of the data
at the end of the question, steam tables and the enthalpy table
given in the...
To supply heated air to a house, a high-efficiency gas furnace burns gaseous propane (C3H8) with...
To supply heated air to a house, a high-efficiency gas furnace
burns gaseous propane (C3H8) with a combustion efficiency of 96
percent. Both the fuel and 40 percent excess air are supplied to
the combustion chamber at 25C and 100 kPa, and the combustion is
complete. Because this is a high-efficiency furnace, the product
gases are cooled to 40C and 100 kPa before leaving the furnace. To
maintain the house at the desired temperature, a heat transfer rate
of 31,650...
The combustion of n c3h8 = 100 kmol.h-1 propane gas ( pure fuel stream) takes place...
The combustion of n c3h8 = 100 kmol.h-1 propane gas (
pure fuel stream) takes place at isobaric-atmospheric conditions (
P= 1atm) in a continuous reactor, in the presence of air and using
an oxygen inlet of n O2( g) = 1000kmol.h-1 according
to:
C3H8 + 5O2( g) -----
3CO2 + 4H2O
The inlet gases are supplied at T=25oC, and leave the
reactor at T= 300oC, according to the following
values:
Compound
Kmol/h / outl
C3H8 ( g)
50
O2...
Propane gas, C3H8, reacts with oxygen to produce water and carbon dioxide. C3H8(g)+5O2(g)→3CO2(g)+4H2O(l) Part A How...
Propane gas, C3H8, reacts with oxygen to produce water and
carbon dioxide.
C3H8(g)+5O2(g)→3CO2(g)+4H2O(l)
Part A
How many moles of CO2 form when 3.70 mol of C3H8 completely
reacts?
Part B
How many grams of CO2 are produced from 17.4 g of propane
gas?
Part C
How many grams of CO2 can be produced when 43.4 g of C3H8
reacts?
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- The Following Java expression: S/10 * 10 + 10 – S = C Show that this...
- Year Cash Flow 0 −$9,700 1 5,800 2 2,500 3 3,400 &nb
- In a two – story building, an exterior column is to be designed for a service...
- Explain the use of neural networking modeling in predictive analytics. Discuss a real-life example of where...
- Boarder line and antisocial disorder are perhaps the most research personality disorder.What are the most common...
- Read at least 2 academically reviewed articles and Write an annotated bibliography paper on Master Budgeting
- Why normalization and referential integrity are important principles when designing relational databases?
ADVERTISEMENT