1) In regards to the cross-sections of straight members, what two axes coincide? 2) Give the...

1) In regards to the cross-sections of straight members, what two axes coincide?

2) Give the two equations known as the curved-beam formula. Define each variable.

3) As discussed in class, what is the theory of failure for ductile materials?

4) As discussed in class, what is the theory of failure for brittle materials?

5) What is the most common mechanism of yielding of a ductile material, such as steel?

6) The yield stress for a zirconium-magnesium alloy is ?Y = 15.3 ksi. If a machine part is made of this material and a critical point in the material is subjected to in-plane principal stresses ?1 and ?2 = -0.5?1, determine the magnitude of ?1 that will cause yielding according to the maximum shear stress theory.

Expert Solution

samet mamat answered 2 years ago

Question: 1. Neatly, draw two cross sections showing differences in the arrangements of the vascular tissue......

Question: 1. Neatly, draw two cross sections showing differences in the arrangements of the vascular tissue... 1. Neatly, draw two cross sections showing differences in the arrangements of the vascular tissue found in a dicot herbaceous stem and a six year old dicot woody stem. Identify the following tissues if they are present: ground tissue (soft support), vascular tissue (both primary and secondary conducting tissues), wood, bark, seasonal growth rings, pith rays. (be complete) 2. Color code and explain the...

Probability and Random Processes 1. What are members of a Set called? 2. Give an example...

Probability and Random Processes 1. What are members of a Set called? 2. Give an example of countable and uncountable sets. 3. Give an example of when a Venn Diagram would be helpful. 4. Give an example when Permutations and Combination must be used.

1. Explain the five cross-cultural competencies for leaders, give examples. 2. What is ethnocentrism? What is...

1. Explain the five cross-cultural competencies for leaders, give examples. 2. What is ethnocentrism? What is prejudice? give examples 3. What is GLOBE and what are its nine cultural dimensions? 4. Explain the ten clusters of world cultures using GLOBE research on cultural dimensions.

1.1 You have two solenoids with identical cross-sections and lengths. But solenoid #1 has density of...

1.1 You have two solenoids with identical cross-sections and lengths. But solenoid #1 has density of turns twice as big as solenoid #2. We can conclude that inductance of solenoid #1 is: a. Twice as big as inductance of solenoid #2 b. Four times as big as inductance of solenoid #2 c. Same as inductance of solenoid #2 d. Half of inductance of solenoid #2 e. Quarter of inductance of solenoid #2. 1.2 You have two solenoids of the same length, same density of turns, but...

1. What is relevant range? 2. Give in detail give two examples of costs that are...

1. What is relevant range? 2. Give in detail give two examples of costs that are variable costs and two examples of fixed costs.

The figure shows wire 1 in cross section; the wire is long and straight, carries a...

The figure shows wire 1 in cross section; the wire is long and straight, carries a current of 4.20 mA out of the page, and is at distance d1 = 2.61 cm from a surface. Wire 2, which is parallel to wire 1 and also long, is at horizontal distance d2 = 5.22 cm from wire 1 and carries a current of 7.06 mA into the page. What is the x component of the magnetic force per unit length on...

1.b Explain straight-line depreciation and give an example of an entry. 1.a What is amortization and...

1.b Explain straight-line depreciation and give an example of an entry. 1.a What is amortization and when is that used?

The dashed lines in the diagram represent cross sections of equipotential surfaces drawn in 1 V increments.

The dashed lines in the diagram represent cross sections of equipotential surfaces drawn in 1 V increments. (Figure 1) What is the work WAB done by the electric force to move a 1 C charge from A to B? Express your answer in joules. What is the work WAD done by the electric force to move a 1 C charge from A to D? Express your answer in joules. The magnitude of the electric field at point C is greater...

A very long, straight solenoid with a cross-sectional area of 5.85 cm^2 is wound with 32...

A very long, straight solenoid with a cross-sectional area of 5.85 cm^2 is wound with 32 turns of wire per centimeter, and the windings carry a current of 0.245 A . A secondary winding of 2 turns encircles the solenoid at its center. When the primary circuit is opened, the magnetic field of the solenoid becomes zero in 4.75×10^−2 s . What is the average induced emf in the secondary coil?

Forum question: 1. When do recognition and realization coincide for tax losses? 2. Why is it...

Forum question: 1. When do recognition and realization coincide for tax losses? 2. Why is it desirable to recognize the benefit of a tax loss carryforward in the period of the accounting loss? Under what circumstances will such a benefit be realized?

Question