An ideal chopper (buck) operates at a frequency of 500 Hz. It is supplied from a...

An ideal chopper (buck) operates at a frequency of 500 Hz. It is supplied from a dc source E = 60 V. The load consists of a 3-Ohm and the inductance is 9 mH. Assume the diode is ideal and the battery is lossless. Assume periodic steady state and CCM. Chopper which is Buck which is a step down converter

A) Draw the circuit diagram

B) Derive the expression for the load current, i0(t)

C) For tON/tOFF = 1/1, calculate and draw the current waveform and calculate the mean load voltage and current

D) For tON/tOFF = 4/1, calculate and draw the current waveform and calculate the mean load voltage and current

Expert Solution

Manojponduru answered 1 year ago

When a 0.710 kg mass oscillates on an ideal spring, the frequency is 1.46 Hz ....

When a 0.710 kg mass oscillates on an ideal spring, the frequency is 1.46 Hz . A. What will the frequency be if 0.260 kg are added to the original mass? Try to solve this problem withoutfinding the force constant of the spring. B. What will the frequency be if 0.260 kg are subtracted from the original mass? Try to solve this problem without finding the force constant of the spring.

a. Design a broadband Butterworth bandpass filter with a lower cutoff frequency of 500 Hz and...

a. Design a broadband Butterworth bandpass filter with a lower cutoff frequency of 500 Hz and an upper cutoff frequency of 4500 Hz. The passband gain of the filter is 20 dB. The gain should be down at least 15 dB at 200 Hz and 11.25 kHz. Use 20 nF capacitors in the high-pass circuit and 10 k\Omega resistors in the low-pass circuit. b) Draw a circuit diagram of the filter and label all the components.

4)Design a band-pass filter with a passband from 500 Hz to 2000 Hz using “butter” routine...

4)Design a band-pass filter with a passband from 500 Hz to 2000 Hz using “butter” routine of MATLAB. Assume a sampling frequency of 8KHz. Let the filter order be M=4. Plot the magnitude response and provide the filter coefficients and the transfer function

Generate and plot sinusoids of frequencies 300 Hz, 500 Hz and 1200 Hz. Plot each of...

Generate and plot sinusoids of frequencies 300 Hz, 500 Hz and 1200 Hz. Plot each of them and their sum using the “subplot” command in one figure. Indicate the axes’ titles.

BUCK FILTER TRANSFER FUNCTION (CCM) USING MATLAB I. State-space Modelling and Transfer Function of Ideal Buck...

BUCK FILTER TRANSFER FUNCTION (CCM) USING MATLAB I. State-space Modelling and Transfer Function of Ideal Buck Converter 1. Write the AC state-space for an ideal Buck Converter under CCM, given the state-variables iL^(t) and vc^(t), input variables d^(t) and vs^(t), and output variables iL^(t) and vc^(t). 2. Create the state-space model in Matlab using R=5/3 ohms, L=10 uH, C=242 uF, Vs=Vin= 20 V, Vo = 5 V, D=5/20 3. Extract the transfer functions from the state-space model. vo^(s)/vs^(s), vo^(s)/d^(s), iL^(s)/vs^(s),...

Q20 (a) A step down chopper circuit is supplied with power from an ideal voltage source...

Q20 (a) A step down chopper circuit is supplied with power from an ideal voltage source of terminal voltage 100 V. The load voltage waveform consist of rectangular pulses across a 1kΩ resistor of duration 1ms in one cycle of 2.5 ms. Calculate the average value.rms value & ripple factor (b) Explain a 1-ф full wave controlled semi converter with freewheel diode for RLE load. (12 Mark)

Question 1: SOUND a) A bystander hears a siren vary in frequency from 570 Hz to...

Question 1: SOUND a) A bystander hears a siren vary in frequency from 570 Hz to 398 Hz as a fire truck approaches, passes by, and moves away on a straight street. What is the speed of the truck? (Take the speed of sound in air to be 343 m/s.) By how many decibels do you reduce the sound intensity level due to a source of sound if you triple your distance from it? Assume that the waves expand spherically....

7. An inductor is designed to filter high frequency noise from power supplied to a personal...

7. An inductor is designed to filter high frequency noise from power supplied to a personal computer. Do you connect the inductor in series or in parallel with the computer? Explain. Please explained detailed step by step, with diagram.

At a factory, a noon whistle is sounding with a frequency of 480 Hz. As a...

At a factory, a noon whistle is sounding with a frequency of 480 Hz. As a car traveling at 61.0 km/h approaches the factory, the driver hears the whistle at frequency fi. After driving past the factory, the driver hears frequency ff. What is the change in frequency ff - fi heard by the driver? Assume the speed of sound in air is 343 m/s.

The power supplied by a torque, ?, to rotate an object at angular frequency, ?, is...

The power supplied by a torque, ?, to rotate an object at angular frequency, ?, is P = ??. A common car engine produces ? = 3000Nm at ? = 3000 RPM (rotations per minute). Suppose you want to create an electric car that runs on a battery and electric motor. Typically, electric car motors utilize a current of 100A and have a cross sectional area of 0.5m2. Suppose also that the number of wire turns in the coil of...

Question